Both GRUB and SeaBIOS can chainload lzma compressed payloads.
Therefore it is beneficial to compress secondary payloads
like Memtest86+, coreinfo, nvramcui,... for both size reasons and
often also speed reasons since the limiting factor is generally the
IO of the boot device.
Tested with SeaBIOS and memtest86+ master on Thinkpad X220.
Change-Id: Iddfd6fcf4112d255cc7b2b49b99bf5ea4d6f8db4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Part of the original patch, commit 85a90e1, reverted edk2 commit:
1d7258f [CorebootModulePkg:Removing EFI_RESOURCE_ATTRIBUTE_TESTED]
which had the unintended effect of causing memory above 2GiB
from being unavailable (marked reserved) when booting without a
connected display (aka headles mode).
This commit strips the patch to only the component needed to fix
reading of the coreboot table low memory pointer.
TEST: boot 4GB google/panther without connected display, verify
memory above 2GB available via 'dmesg | grep BIOS-e820' and 'free -m'
Change-Id: I39327929f9b0b940fc12cdca1d744456fdc097e0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/23483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This fixes tianocore garbled framebuffer when 'x_resolution *
bits_per_pixel / 8' is not equal to 'bytes_per_line'.
This patch was also send to the edk2-devel mailing list:
https://lists.01.org/pipermail/edk2-devel/2018-January/020436.html
Tested on Thinkpad X220 with libgfxinit on 1366x768 display.
Change-Id: Ib9eaf692f86d416cd4ec3cc73a8b0aa0a28a38dd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Updating from commit id f3bb31fee:
2017-09-08 (vboot: Support EC early firmware selection)
to commit 61cfcc3b:
2018-01-17 (meowth: Select CONFIG_DRIVER_BUS_SPI_INTEL_GSPI_VERSION_2)
This brings in 57 new commits.
Change-Id: Iadacc6017abbcc659e461d2fc27990ef8124871b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/23333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The MMIO address can change for different platforms
like Apollolake.
Change-Id: I6ec72d3a14f00212323a04e20d5a477dbc26b770
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/22631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
The depthcharge .config only exists after depthcharge was built. Other
possible `PAYLOAD_CONFIG` files most probably miss a rule, too.
Change-Id: I8e6f79bb2bd07cbef1317f2623bbef9ca0e74880
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/22137
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Using the stable version by default is consistent with
payloads/external/SeaBIOS.
Change-Id: I444ba2daaf5ecc5edde907a7842013f88e1c4c9b
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/22528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This should make reproducible builds of coreboot with GRUB2 easier.
Change-Id: If855042945ab34f34c554e7490c811ec7b256980
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/22527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
SeaBIOS 1.11.0 was released on November 10th, 2017. Changes include
* Initial support for NVME drives
* Support for vga emulation over a serial port in SeaBIOS (sercon)
* Support for serial debugging using MMIO based serial ports
* Support for scsi devices with multiple LUNs
* Support for boot-to-boot persistent coreboot cbmem logs
* Improved coreboot vga (cbvga) mode setting compatibility
* Several bug fixes and code cleanups
See also https://www.seabios.org/Releases#SeaBIOS_1.11.0 and for all
details on the changes, use
git log --oneline rel-1.10.3..rel-1.11.0
in the SeaBIOS repository.
Change-Id: Ie46a526593177c5241fbd979c7fa1934478f7382
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-on: https://review.coreboot.org/22429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Vasya Boytsov <vasiliy.boytsov@phystech.edu>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
SeaBIOS 1.10.3 was tagged on October 12th, 2017 with the following
changes.
```
$ git log --oneline rel-1.10.2..rel-1.10.3
b7661dd tcgbios: Fix use of unitialized variable
6055583 boot: Increase description size in boot menu
3551613 resume: Don't attempt to use generic reboot mechanisms on QEMU
```
Change-Id: I3a9ebf10a55118fc35aed688ea7ec794333c8227
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-on: https://review.coreboot.org/22358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since the git:// protocol is unencrypted and unauthenticated, there's a
security risk associated with using it: A man-in-the-middle attacker
could replace e.g. the master branch with malicious code.
Mitigate this risk somewhat by cloning GRUB2 via HTTPS.
Change-Id: Ice8f8d108e7dfa1a1ecd58d9735944fa9570ace8
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21344
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Updating from commit id 3f3a496a 2017-09-01 09:20:19
(image_signing: Fix loem.ini pattern for unibuilds)
to commit id 753e34e9 2017-08-31 10:12:40
(futility: Make rwsig sign command produce EC_RW image)
This brings in 5 new commits.
This also updates Depthcharge stable commit ID.
Updating from a843f262 2016-08-16 08:41:04
(kahlee: select emmc boot first if available)
to commit id f3bb31fe 2017-08-15 17:15:33
(vboot: Support EC early firmware selection)
This brings in 14 new commits.
Change-Id: I17d034e87fa642c5e30e933eb98bcfe5ceaaa3a8
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/21490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Previously the random seed was fixed, which led to the same sequence of
blocks for each run.
Now that libpayload has time(), no change is needed in the function
rand_init() of tint.
Change-Id: I2e482bbb9d33cdbbf3c15916458329f99fbc4450
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/20980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Updating from commit id 5a086f5c - Tue Jul 11 23:57:30 2017:
(ps8751: enable software sync.)
to commit id a843f262 - Wed Aug 16 23:37:52 2017:
(kahlee: select emmc boot first if available)
This brings in 20 new commits.
This matches with the updated vboot submodule.
Change-Id: If030bc3e75dd470838590540880213bd841154b8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Credit for this patch goes to 'ReddestDream'.
The patch is pulled from https://github.com/MattDevo/edk2
TESTED on thinkpad X200.
Change-Id: I1517607cee8308c5f5443c58c16ce44056611e92
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
We were explicitly passing CC and TARGET_CC to configure but overwrote
that decision later by passing CC (with the value of TARGET_CC) directly
to a recursive make call. The latter overwrite was introduced because
`unexport` alone doesn't work on variables that were specified on a make
command line (they are added to MAKEOVERRIDES and passed to further re-
cursive make calls).
Instead of unexporting random variables, unexport those that were actu-
ally passed from payloads/external/Makefile.inc and clear MAKEOVERRIDES.
Do not pass OBJDUMP as that is nowhere to be found in the GRUB sources.
And, last but not least, add --disable-werror because building GRUB is
very susceptible to changes in the flex version.
Change-Id: Iaff2c72e89a5a540fe365eacb84811d5cff9d4d4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/20990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Create a directory patches, and add necessary patches to be applied to
upstream tianocore.
Patches include:
-Patch for no PCI address enumeration
-Patches to enable keyboard input
-Patch to disable serial to speed up boot process.
Patches pulled from https://github.com/MattDevo/edk2.
Additionally, modify tianocore Makefile to apply patches during build.
Change-Id: I4eaa602418995a68753b1ed13af8c6374eaa312f
Signed-off-by: Evelyn Huang <evhuang@google.com>
Reviewed-on: https://review.coreboot.org/20639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Update the existing tianocore payload (which didn't do any more than
adding an elf payload with a specific name) to fetch and build the
UEFI corebootPayloadPackage, using the coreboot toolchain for
compilation. Only checkout the commit when changing commit IDs or if
version is master, instead of every time it builds.
Currently working if patches are merged into the upstream edk2
repository (to be included in a follow-on patch).
Change-Id: I0bf4cedec2d6821ae2a04184ebb5cf88979ccee3
Signed-off-by: Martin Roth <martinroth@google.com>
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Signed-off-by: Evelyn Huang <evhuang@google.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/15057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This line has a weird history. It got a `|| exit 0` removed lately which
obviously was there to fix the presence of the superfluous `test` at the
beginning. Now, remove the `test` too to make the clean target always
succeed again ;)
Change-Id: I9e069cf5d9ac8416cf350161439aa60798ef7b6b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20769
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
- Add prompt so the defconfig can be selected for the build.
- Remove target rename code from makefile. The old versions don't build
with the latest vboot, so this isn't useful anymore.
- Change $(info ...) to an echo. info prints immediately when
evaluated, which made it print when it shouldn't have, on make clean
for example.
- Split up single line shell scripts into multiple lines
- Change checkout target to only update the commit id when actually
changing versions instead of on every build.
Change-Id: I46fc2822cf93c821b402e8961ceecedc088f486c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Update from commit eb583fa8 - Wed Mar 29, 2017
(rk3399_sdhci: Reintroduce PHY power-cycling at 52MHz)
to commit 5a086f5c - Tue Jul 11, 2017
(ps8751: enable software sync)
This brings the stable version of depthcharge forward by 74 commits.
Change-Id: I3a3719fa3a91824042d452de7774be85b884d96d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The word 'coreboot' should always be written in lowercase, even at the
start of a sentence.
Change-Id: I2ec18ca55e0ea672343a951ab81a24a5630f45fd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20028
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
The coreboot sites support HTTPS, and requests over HTTP with SSL are
also redirected. So use the more secure URLs, which also saves a
request most of the times, as nothing needs to be redirected.
Run the command below to replace all occurences.
```
$ git grep -l -E 'http://(www.|review.|)coreboot.org'
| xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g'
```
Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/20034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Rename `FRAMEBUFFER_KEEP_VESA_MODE` to `LINEAR_FRAMEBUFFER` and put
it together with new `VGA_TEXT_FRAMEBUFFER` into a choice. There are
two versions of `LINEAR_FRAMEBUFFER` that differ only in the prompt
and help text (one for `HAVE_VBE_LINEAR_FRAMEBUFFER` and one for
`HAVE_LINEAR_FRAMEBUFFER`). Due to `kconfig_lint` we have to model
that with additional symbols.
Change-Id: I9144351491a14d9bb5e650c14933b646bc83fab0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/19804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
SeaBIOS 1.10.2 was released on February 28th, 2017 [1][2] with the
changes below.
```
$ git log --oneline rel-1.10.1..rel-1.10.2
5f4c7b1 QEMU fw_cfg: Write fw_cfg back on S3 resume
c45ca70 QEMU fw_cfg: Add functions for accessing files by key
31b6229 QEMU fw_cfg: Add command to write back address of file
aa7219d romfile-loader: Switch to using named structs
2a1d88c QEMU DMA: Add DMA write capability
d2ac564 ps2port: Disable keyboard/mouse prior to resetting ps2 controller
b0e3c67 vgasrc: Increase debug level
ca3ab93 ahci: Set upper 32-bit registers to zero
```
This fixes the problem on a Lenovo X60, that the keyboard is not
initialized by SeaBIOS when for example loaded from GRUB.
[1] https://www.seabios.org/Releases#SeaBIOS_1.10.2
Change-Id: Idc078ffa896b2e105faabd2d8befeaf9a2a0b6ac
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/19290
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Update from commit 124af94f - Fri Feb 26, 2016
(skylake boards: unconditionally re-enable 8254 PIT for legacy)
To commit eb583fa8 - Wed Mar 29, 2017
(rk3399_sdhci: Reintroduce PHY power-cycling at 52MHz)
This brings the stable version of depthcharge forward by 325 commits.
Change-Id: I31b3235df6d36409ff1b365e6adb6852281df097
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19220
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Update from commit 2afd66eb - Fri Jul 29, 2016
([pixbuf] Enable PNG format by default)
To commit fd6d1f46 - Fri Mar 31, 2017
([thunderx] Use ThunderxConfigProtocol to obtain board configuration)
This moves the stable iPXE commit forward 144 commits.
Change-Id: Ia0c97f863be39632c9206ca95b3857047fc37e26
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19221
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Enable the USB during the initialization of tint. Without it USB
keyboards don't work, which makes this payload pointless on
systems where a PS/2 keyboard port isn't available.
Based on I98f0ccdb19d6b195572941cf87ce3221f57db7c5 (tint and
nvramcui: enable USB, update tint to 0.04+nmu1 with changes) [1]
[1] https://review.coreboot.org/17507/
Change-Id: Iaa8dfac0301ef19a2d76a0975d025b00e7f3807b
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18766
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Since version 9332965 "serialio: Support for mmap serial ports", SeaBIOS
supports memory mapped serial ports. This patch automatically configures
SeaBIOS when the Hudson UART is enabled.
Change-Id: I072f6a957df7e143d790783546b0725bcd597d9c
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-on: https://review.coreboot.org/18025
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This change is based on the following commit:
3aa91dc payloads/seabios: Add "git revision" to the SeaBIOS version menu
Change-Id: I9987e3673e70b5cb20173d1ddff6060f42a5374a
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/18352
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Configure GRUB to build with boot time statistics. That allows users
to add that module to GRUB by adding `boottime` to the list of extra
modules.
Change-Id: I76a07e49aecb37652fe8c7d6a9421fd464424287
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/18367
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Change depthcharge to not require a board-specific config file for
libpayload. If the Kconfig option is selected, use the settings
in libpayload/configs/defconfig instead.
Change-Id: I4fd1a5915472f28e757c62f3f2415716f1fdfc71
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/18271
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add the capability for specifying which version of depthcharge to
checkout and build. This is similar to the existing feature for
SeaBIOS.
The depthcharge makefile already contains some structure for checking
out master vs. stable however the calling Makefile.inc ingored this
feature. Add the command-line variable assignment for these, along
with a tree-ish for any revision.
Change-Id: I99a5b088cb0ebb29e5d96a84217b3bfa852de8ac
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/18270
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Depending on the commit to build, depthcharge may have a different
target name (depthcharge vs. depthcharge_unified). Add some logic
to determine which name should be used based on the commit ID
being requested.
Change-Id: I05b853934d13696f4bd0d79d53ff6c5f59096d1c
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/18269
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Drop the _unified moniker from the depthcharge build. The payload
and coreboot have drifted out of sync and there is no longer a
non-unified depthcharge.
This patch corresponds with the depthcharge change:
https://review.coreboot.org/cgit/depthcharge.git/commit/?id=74a0739
Change-Id: I8d028b14d2eee63dfdc9d3dd63695f1c58ea7984
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/18268
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
The SeaBIOS and coreboot log levels don't really align, so setting the
SeaBIOS log level to the same as coreboot's isn't really what we want.
- Update default log level to use the default SeaBIOS log level.
- Update the current help text to match the new defaults.
- Add help text for what is displayed at various levels.
- Get rid of separate type & prompt lines.
- Add comments for default seabios level & logging disabled
Change-Id: I5a8b75bd44748cb94a83a77ac3a379c8a9587e7b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18210
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
Previously SeaBIOS's default was used (1). This patch defaults to
coreboot's console level instead which is approximately the same
verbosity as SeaBIOS and thus what a user would probably expect.
Change-Id: If79e5f40c9380bb527f870eeb7d0cb43faf00beb
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/18051
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Changes since SeaBIOS 1.9.3
Release 1.10.0:
* Initial support for Trusted Platform Module (TPM) version 2.0
* Several USB XHCI timing fixes on real hardware
* Support for "LSI MPT Fusion" scsi controllers on QEMU
* Support for virtio devices mapped above 4GB
* Several bug fixes and code cleanups
Release 1.10.1:
* Updates for QEMU for reproducible builds
Change-Id: I465700307d72fa44b6900b38b332603ea505ed09
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/18026
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
On QEMU using SeaVGABIOS breaks some bootloaders, e.g. ISOLINUX does not
work and GRUB works but is forced in txtmode, instead of graphical mode.
Change-Id: If31d4e5ed19cbeed3f8f9dbc23cc738dd55986e5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17122
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The STABLE build of FILO does not build anymore with the
current HEAD of coreboot. However, the current HEAD of FILO
does build with the current HEAD of coreboot. Update FILO
STABLE to FILO HEAD.
Change-Id: I4eece3aaada0dfdf4da106d5d260b5b361537558
Signed-off-by: Kevin Paul Herbert <kph@platinasystems.com>
Reviewed-on: https://review.coreboot.org/15195
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG should only occur together with
MAINBOARD_HAS_NATIVE_VGA_INIT. It seems to be used to just have to have
the option to be able to select SEABIOS_VGA_COREBOOT.
This patch makes these boards use MAINBOARD_DO_NATIVE_VGA_INIT and
MAINBOARD_HAS_NATIVE_VGA_INIT to have it select SEABIOS_VGA_COREBOOT
by default when SeaBIOS is chosen.
Change-Id: If0a36af1883a3d62b16a61483733be981a85e5e2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16981
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
This brings in two additional changes:
- Use OBJCOPY if available.
- Fix strstr() indent and rewrite to not call strlen() on each char.
Change-Id: Id13dfda28c545332fce8282e849f379bf50629b9
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16605
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The SeaBIOS Stable version 1.9.3 was released back in July. This has
just 4 fixes over 1.9.1:
fw/msr_feature_control: add support to set MSR_IA32_FEATURE_CONTROL
fw/pci: Add support for mapping Intel IGD via QEMU
fw/pci: add Q35 S3 support
build: fix .text section address alignment
Change-Id: I527df85b5199942706d1188285c6678bf2f726a1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16254
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
Reviewed-by: Omar Pakker
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Arthur Heymans