endian.h lives in under sys on the BSDs. Replace htole32() with
swab32(htonl(..)) as a proxy for little endian operations.
Change-Id: I84a88f6882b6c8f14fb089e4b629e916386afe4d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11695
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
The command adds a new cbfs file, fills in the CBFS meta data in cbfs
master header format, then points the master header pointer (which
resides at the last 4 bytes of the CBFS region) to the data area of the
new file.
This can leak some space in CBFS if an old-style CBFS with native master
header gets the treatment, because a new header is created and pointed
at. flashmap based images have no such header, and the attempt to create
a second file with the (hardcoded) name will fail.
Change-Id: I5bc7fbcb5962b35a95261f30f0c93008e760680d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11628
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The locate command was previously being used for x86 romstage
linking as well as alignment handling of files. The add command
already supports alignment so there's no more users of the
locate command. Remove the command as well as the '-T' (top-aligned)
option.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi. Noted microcode being directly added.
Change-Id: I3b6647bd4cac04a113ab3592f345281fbcd681af
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11671
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of going through the locate then add-stage
dance while linking romstage twice allow for adding romstage
with --xip flags to perform the relocation while adding it
into CBFS. The -P (page-size) and -a (alignment) parameters
were added as well so one could specify the necessary
parameters for x86 romstage.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted on glados.
Change-Id: I585619886f257e35f00961a1574009a51c28ff2b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11669
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The cbfs_locate_entry() function had a hack in there which
assumed a struct cbfs_stage data was being added in addition
to the struct cbfs_file and name. Move that logic out to the
callers while still maintaining the logic for consistency.
The only impacted commands cbfs_add and cbfs_locate, but
those are using the default 'always adding struct cbfs_stage'
in addition to cbfs_file + name. Eventually those should be
removed when cbfs_locate is removed as cbfs_add has no smarts
related to the cbfs file type provided.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi.
Change-Id: I2771116ea1ff439ea53b8886e1f33e0e637a79d4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11668
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Whenever we want to add a file to CBFS with a specific alignment, we
have to do two cbfstool invocations: one to find a place for the file,
and another to actually add the file to CBFS. Get rid of this nonsense
and allow this to be done in one step.
Change-Id: I526483296b494363f15dc169f163d93a6fc71bb0
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11525
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Currently, compression is only allowed at subheader level (e.g. cbfs_stage,
cbfs_payload_segment). This change adds compression field to each file's
header so that any cbfs file can be compressed.
With the necessary additions in coreboot and libpayload, the following sample
code can load a compressed file:
const char *name = "foo.bmp";
struct cbfs_file *file = cbfs_get_file(media, name);
void *dst = malloc(ntohl(file->uncompressed_size));
dst = cbfs_get_file_content(media, name, type, file, dst);
cbfs_stage and cbfs_payload_segment continue to support compression at
subheader level because stages and payloads have to be decompressed to the load
address, which is stored in the subheader. For these, file level compression
should be turned off.
Change-Id: I9a00ec99dfc68ffb2771bb4a3cc5ba6ba8a326f4
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10935
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
They're passed as part of the header now.
Change-Id: I7cd6296adac1fa72e0708b89c7009552e272f656
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11327
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The header is now created before the "converters" are run.
Adding new capabilities (and fields to the header) will happen there,
so we're close.
Change-Id: I0556df724bd93816b435efff7d931293dbed918f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11326
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
These functions can do all kinds of things, such as converting an ELF
image into SELF, or (in the future) compress or checksum entire files.
This may require changing or adding fields to the header, so they
need to have access to it.
The header_size parameter that was provided (but never used) is
equivalent to cbfs_file's offset field.
Change-Id: I7c10ab15f3dff4412461103e9763a1d78b7be7bb
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11325
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The idea is that they can at some point add extended attributes to the header.
That also needs to be passed, but let's start simple.
Change-Id: I80359843078b149ac433ee3d739ea192592e16e7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11216
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It will at some point create the header, and pass it with its size. We can
start with the size already.
Change-Id: I8f26b2335ffab99a664d1ff7bc88e33ed62cf9ca
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11215
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This is in preparation of creating the cbfs_file header much earlier
in the process. For now, size is enough because lots of things need to
move before it makes sense to deal with cbfs_file at a higher level.
Change-Id: I47589247c3011cb828170eaa10ef4a1e0f85ab84
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11213
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
No need to read the file before bailing out.
Change-Id: Ida7226c6ec227e1105724cdb1e5a0927217a69c7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11212
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Parse compression algorithm arguments using a single list.
Change-Id: Idc5b14a53377b29964f24221e42db6e09a497d48
Signed-off-by: Sol Boucher <solb@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Change-Id: I1a117a9473e895feaf455bb30d0f945f57de51eb
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Reviewed-on: http://review.coreboot.org/10931
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
With introducing hash algorithms, 'algo' is ambiguous, so rename it to
'compression' instead.
Change-Id: Ief3d39067df650d03030b5ca9e8677861ce682ed
Signed-off-by: Sol Boucher <solb@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Change-Id: I1a117a9473e895feaf455bb30d0f945f57de51eb
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Reviewed-on: http://review.coreboot.org/10930
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It's not like we _ever_ changed it, so drop the option and make cbfstool
use the default. always.
Change-Id: Ia1b99fda03d5852137a362422e979f4a4dffc5ed
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10918
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Because new images place the bootblock in a separate region from the
primary CBFS, performing an update-fit operation requires reading an
additional section and choosing a different destination for the write
based on the image type. Since other actions are not affected by these
requirements, the logic for the optional read and all writing is
implemented in the cbfs_update_fit() function itself, rather than
relying on the main() function for writing as the other actions do.
Change-Id: I2024c59715120ecc3b9b158e007ebce75acff023
Signed-off-by: Sol Boucher <solb@chromium.org>
Reviewed-on: http://review.coreboot.org/10137
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Our style discourages unnecessary typedefs, and this one doesn't gain
us anything, nor is it consistent with the surrounding code: there's
a function pointer typedef'd nearby, but non-opaque structs aren't.
BUG=chromium:482652
TEST=None
BRANCH=None
Change-Id: Ie7565240639e5b1aeebb08ea005099aaa3557a27
Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Change-Id: I4285e6b56f99b85b9684f2b98b35e9b35a6c4cb7
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Reviewed-on: http://review.coreboot.org/10146
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The cbfstool handling of new-style FMAP-driven "partitioned" images
originally disallowed the use of x86-style top-aligned addresses with
the add.* and layout actions because it wasn't obvious how they should
work, especially since the normal addressing is done relative to each
individual region for these types of images. Not surprisingly,
however, the x86 portions of the build system make copious use of
top-aligned addresses, so this allows their use with new images and
specifies their behavior as being relative to the *image* end---not
the region end---just as it is for legacy images.
Change-Id: Icecc843f4f8b6bb52aa0ea16df771faa278228d2
Signed-off-by: Sol Boucher <solb@chromium.org>
Reviewed-on: http://review.coreboot.org/10136
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These new-style firmware images use the FMAP of the root of knowledge
about their layout, which allows them to have sections containing raw
data whose offset and size can easily be determined at runtime or when
modifying or flashing the image. Furthermore, they can even have
multiple CBFSes, each of which occupies a different FMAP region. It is
assumed that the first entry of each CBFS, including the primary one,
will be located right at the start of its region. This means that the
bootblock needs to be moved into its own FMAP region, but makes the
CBFS master header obsolete because, with the exception of the version
and alignment, all its fields are redundant once its CBFS has an entry
in the FMAP. The version code will be addressed in a future commit
before the new format comes into use, while the alignment will just be
defined to 64 bytes in both cbfstool and coreboot itself, since
there's almost no reason to ever change it in practice. The version
code field and all necessary coreboot changes will come separately.
BUG=chromium:470407
TEST=Build panther and nyan_big coreboot.rom and image.bin images with
and without this patch, diff their hexdumps, and note that no
locations differ except for those that do between subsequent builds of
the same codebase. Try working with new-style images: use fmaptool to
produce an FMAP section from an fmd file having raw sections and
multiple CBFSes, pass the resulting file to cbfstool create -M -F,
then try printing its layout and CBFSes' contents, add and remove CBFS
files, and read and write raw sections.
BRANCH=None
Change-Id: I7dd2578d2143d0cedd652fdba5b22221fcc2184a
Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Commit-Id: 8a670322297f83135b929a5b20ff2bd0e7d2abd3
Original-Change-Id: Ib86fb50edc66632f4e6f717909bbe4efb6c874e5
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265863
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10135
Tested-by: build bot (Jenkins)
The buffer API that cbfstool uses to read and write files only directly supports
one-shot operations on whole files. This adds an intermediate partitioned_file
module that sits on top of the buffer system and has an awareness of FMAP
entries. It provides an easy way to get a buffer for an individual region of a
larger image file based on FMAP section name, as well as incrementally write
those smaller buffers back to the backing file at the appropriate offset. The
module has two distinct modes of operation:
- For new images whose layout is described exclusively by an FMAP section, all
the aforementioned functionality will be available.
- For images in the current format, where the CBFS master header serves as the
root of knowledge of the image's size and layout, the module falls back to a
legacy operation mode, where it only allows manipulation of the entire image
as one unit, but exposes this support through the same interface by mapping
the region named SECTION_NAME_PRIMARY_CBFS ("COREBOOT") to the whole file.
The tool is presently only ported onto the new module running in legacy mode:
higher-level support for true "partitioned" images will be forthcoming. However,
as part of this change, the crusty cbfs_image_from_file() and
cbfs_image_write_file() abstractions are removed and replaced with a single
cbfs_image function, cbfs_image_from_buffer(), as well as centralized image
reading/writing directly in cbfstool's main() function. This reduces the
boilerplate required to implement each new action, makes the create action much
more similar to the others, and will make implementing additional actions and
adding in support for the new format much easier.
BUG=chromium:470407
TEST=Build panther and nyan_big coreboot.rom images with and without this patch
and diff their hexdumps. Ensure that no differences occur at different locations
from the diffs between subsequent builds of an identical source tree. Then flash
a full new build onto nyan_big and watch it boot normally.
BRANCH=None
Change-Id: I25578c7b223bc8434c3074cb0dd8894534f8c500
Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Commit-Id: 7e1c96a48e7a27fc6b90289d35e6e169d5e7ad20
Original-Change-Id: Ia4a1a4c48df42b9ec2d6b9471b3a10eb7b24bb39
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265581
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10134
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patches a memory leak on every struct cbfs_image creation that
was introduced by c1d1fd850e. Since that
commit, the CBFS master header has been copied to a separate buffer so
that its endianness could be fixed all at once; unfortunately, this
buffer was malloc()'d but never free()'d. To address the issue, we
replace the structure's struct cbfs_header * with a struct cbfs_header
to eliminate the additional allocation.
Change-Id: Ie066c6d4b80ad452b366a2a95092ed45aa55d91f
Signed-off-by: Sol Boucher <solb@chromium.org>
Reviewed-on: http://review.coreboot.org/10130
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This enables more warnings on the cbfstool codebase and fixes the
issues that surface as a result. A memory leak that used to occur
when compressing files with lzma is also found and fixed.
Finally, there are several fixes for the Makefile:
- Its autodependencies used to be broken because the target for
the .dependencies file was misnamed; this meant that Make
didn't know how to rebuild the file, and so would silently
skip the step of updating it before including it.
- The ability to build to a custom output directory by defining
the obj variable had bitrotted.
- The default value of the obj variable was causing implicit
rules not to apply when specifying a file as a target without
providing a custom value for obj.
- Add a distclean target for removing the .dependencies file.
BUG=chromium:461875
TEST=Build an image with cbfstool both before and after.
BRANCH=None
Change-Id: I951919d63443f2b053c2e67c1ac9872abc0a43ca
Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Commit-Id: 49293443b4e565ca48d284e9a66f80c9c213975d
Original-Change-Id: Ia7350c2c3306905984cfa711d5fc4631f0b43d5b
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/257340
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/9937
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The following changes were made:
- order commands and options definitions alphabetically
- do not report errors at cbfs_image_from_file() call sites - the
error is reported by the function itself
- remove the unused parameter in cbfs_create_empty_entry() prototype
BRANCH=storm
BUG=none
TEST=compiled cbfstool, built a storm image, observed that the image
still boots
Change-Id: I31b15fab0a63749c6f2d351901ed545de531eb39
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a909a50e03be77f972b1a497198fe758661aa9f8
Original-Change-Id: I4b8898dbd44eeb2c6b388a485366e4e22b1bed16
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/237560
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9746
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The previous patch introduced a bug where the new added case statement
was missing the break. There was no problem testing, because an
unrelated parameter structure field was being modified as a result.
BRANCH=storm
BUG=none
TEST=compiles and runs
Change-Id: Iaeb328048f61ffd57057ebce47f2ac8e00fc5aac
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 27ecc130569e4252e4627052f617130a2017c645
Original-Change-Id: Ib3e6c4c2b5c37588c612b8ab2672f6845c1b4ecb
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/239598
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
The new command allows to create a file where the original CBFS image
is duplicated at a different offset.
The required options of the new command are -D, the offset where the
copy CBFS header is placed, and -s, the size of the new CBFS copy.
When a CBFS is copied, the bootblock area of the source CBFS is
ignored, as well as empty and deleted files in the source CBFS. The
size of the destination CBFS is calculated as the rombase size of the
source CBFS less the bootblock size.
The copy instance can be created in the image only above the original,
which rules out the use of this new command for x86 images. If
necessary, this limitation could be addressed later.
As with other cbfstool commands, unless explicitly specified the
lowest CBFS instance in the image is considered the source. If
necessary, the user can specify the source CBFS using the -H option.
BRANCH=storm
BUG=chrome-os-partner:34161, chromium:445938
TEST=run multiple cbfstool commands on a storm image:
$ cd /tmp
$ cp /build/storm/firmware/image.serial.bin storm.bin
$ cbfstool storm.bin print
storm.bin: 8192 kB, bootblocksize 34472, romsize 458752, offset 0x8700
alignment: 64 bytes, architecture: arm
Name Offset Type Size
cdt.mbn 0x8700 raw 416
ddr.mbn 0x8900 raw 25836
rpm.mbn 0xee40 raw 78576
tz.mbn 0x22180 raw 85360
fallback/verstage 0x36f40 stage 41620
fallback/romstage 0x41240 stage 19556
fallback/ramstage 0x45f00 stage 25579
config 0x4c340 raw 2878
fallback/payload 0x4cec0 payload 64811
u-boot.dtb 0x5cc40 (unknown) 2993
(empty) 0x5d840 null 75608
$ cbfstool storm.bin copy -D 0x420000
E: You need to specify -s/--size.
$ cbfstool storm.bin copy -D 0x420000 -s 0x70000
$ cbfstool storm.bin print
W: Multiple (2) CBFS headers found, using the first one.
storm.bin: 8192 kB, bootblocksize 34472, romsize 458752, offset 0x8700
alignment: 64 bytes, architecture: arm
Name Offset Type Size
cdt.mbn 0x8700 raw 416
ddr.mbn 0x8900 raw 25836
rpm.mbn 0xee40 raw 78576
tz.mbn 0x22180 raw 85360
fallback/verstage 0x36f40 stage 41620
fallback/romstage 0x41240 stage 19556
fallback/ramstage 0x45f00 stage 25579
config 0x4c340 raw 2878
fallback/payload 0x4cec0 payload 64811
u-boot.dtb 0x5cc40 (unknown) 2993
(empty) 0x5d840 null 75608
cbfstool storm.bin print -H 0x420000
storm.bin: 8192 kB, bootblocksize 0, romsize 4784128, offset 0x420040
alignment: 64 bytes, architecture: arm
Name Offset Type Size
cdt.mbn 0x420040 raw 416
ddr.mbn 0x420240 raw 25836
rpm.mbn 0x426780 raw 78576
tz.mbn 0x439ac0 raw 85360
fallback/verstage 0x44e880 stage 41620
fallback/romstage 0x458b80 stage 19556
fallback/ramstage 0x45d840 stage 25579
config 0x463c80 raw 2878
fallback/payload 0x464800 payload 64811
u-boot.dtb 0x474580 (unknown) 2993
(empty) 0x475180 null 110168
$ cbfstool storm.bin remove -n config -H 0x420000
$ cbfstool storm.bin copy -H 0x420000 -D 0x620000 -s 0x70000
$ cbfstool storm.bin print -H 0x620000
storm.bin: 8192 kB, bootblocksize 0, romsize 6881280, offset 0x620040
alignment: 64 bytes, architecture: arm
Name Offset Type Size
cdt.mbn 0x620040 raw 416
ddr.mbn 0x620240 raw 25836
rpm.mbn 0x626780 raw 78576
tz.mbn 0x639ac0 raw 85360
fallback/verstage 0x64e880 stage 41620
fallback/romstage 0x658b80 stage 19556
fallback/ramstage 0x65d840 stage 25579
fallback/payload 0x663c80 payload 64811
u-boot.dtb 0x673a00 (unknown) 2993
(empty) 0x674600 null 113112
$ cbfstool /build/storm/firmware/image.serial.bin extract -n fallback/payload -f payload1
[..]
$ cbfstool storm.bin extract -H 0x620000 -n fallback/payload -f payload2
[..]
$ diff payload1 payload2
Change-Id: Ieb9205848aec361bb870de0d284dff06c597564f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b8d3c1b09a47ca24d2d2effc6de0e89d1b0a8903
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Change-Id: I227e607ccf7a9a8e2a1f3c6bbc506b8d29a35b1b
Original-Reviewed-on: https://chromium-review.googlesource.com/237561
Reviewed-on: http://review.coreboot.org/9742
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There potentially could be multiple CBFS instances present in the
firmware image. cbfstool should be able to operate on any of them, not
just the first one present.
To accomplish that, allow all CBFS commands to accept the -H parameter
(which specifies the exact CBFS header location in the image).
If this parameter is specified, the image is not searched for the CBFS
header, only the specified location is checked for validity, If the
location is valid, it is considered to be the CBFS header, if not -
the tool exits with an error status.
Note, that default behavior of the tool does not change.
BRANCH=storm
BUG=chrome-os-partner:34161, chromium:445938
TEST=run the following experiments:
- examined an image with three CBFS instances, was able to print all
of them.
- built a rambi coreboot image and tried the following (cbfstool output abbreviated):
$ ./util/cbfstool/cbfstool /build/rambi/firmware/coreboot.rom print
coreboot.rom: 8192 kB, bootblocksize 2448, romsize 8388608, offset 0x700000
alignment: 64 bytes, architecture: x86
Name Offset Type Size
cmos_layout.bin 0x700000 cmos_layout 1164
...
(empty) 0x7ec600 null 77848
$ \od -tx4 -Ax /build/rambi/firmware/coreboot.rom | tail -2
7ffff0 fff67de9 000000ff fff6dfe9 fffff650
800000
$ ./util/cbfstool/cbfstool /build/rambi/firmware/coreboot.rom print -H 0x7ff650
coreboot.rom: 8192 kB, bootblocksize 2448, romsize 8388608, offset 0x700000
alignment: 64 bytes, architecture: x86
Name Offset Type Size
cmos_layout.bin 0x700000 cmos_layout 1164
...
(empty) 0x7ec600 null 77848
$ ./util/cbfstool/cbfstool /build/rambi/firmware/coreboot.rom print -H 0x7ff654
E: /build/rambi/firmware/coreboot.rom does not have CBFS master header.
E: Could not load ROM image '/build/rambi/firmware/coreboot.rom'.
$
Change-Id: I64cbdc79096f3c7a113762b641305542af7bbd60
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 86b88222df6eed25bb176d653305e2e57e18b73a
Original-Change-Id: I486092e222c96c65868ae7d41a9e8976ffcc93c4
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/237485
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/9741
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Non-x86 boards currently need to hardcode the position of their CBFS
master header in a Kconfig. This is very brittle because it is usually
put in between the bootblock and the first CBFS entry, without any
checks to guarantee that it won't overlap either of those. It is not fun
to debug random failures that move and disappear with tiny alignment
changes because someone decided to write "ORBC1112" over some part of
your data section (in a way that is not visible in the symbolized .elf
binaries, only in the final image). This patch seeks to prevent those
issues and reduce the need for manual configuration by making the image
layout a completely automated part of cbfstool.
Since automated placement of the CBFS header means we can no longer
hardcode its position into coreboot, this patch takes the existing x86
solution of placing a pointer to the header at the very end of the
CBFS-managed section of the ROM and generalizes it to all architectures.
This is now even possible with the read-only/read-write split in
ChromeOS, since coreboot knows how large that section is from the
CBFS_SIZE Kconfig (which is by default equal to ROM_SIZE, but can be
changed on systems that place other data next to coreboot/CBFS in ROM).
Also adds a feature to cbfstool that makes the -B (bootblock file name)
argument on image creation optional, since we have recently found valid
use cases for CBFS images that are not the first boot medium of the
device (instead opened by an earlier bootloader that can already
interpret CBFS) and therefore don't really need a bootblock.
BRANCH=None
BUG=None
TEST=Built and booted on Veyron_Pinky, Nyan_Blaze and Falco.
Change-Id: Ib715bb8db258e602991b34f994750a2d3e2d5adf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e9879c0fbd57f105254c54bacb3e592acdcad35c
Original-Change-Id: Ifcc755326832755cfbccd6f0a12104cba28a20af
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229975
Reviewed-on: http://review.coreboot.org/9620
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=None
BUG=None
TEST=Manual
Change-Id: I8b31a0b194d353ea3e7863513f2e36f3e032fad8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7ccba49a7c2372cdfff6e2947e417d4d4f5436c2
Original-Change-Id: I9beebdf29e4fc4aa645581146fdc61c659de72df
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229973
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/8808
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
cbfstool has diverged between coreboot upstream and the chromium tree.
Bring in some of the chromium changes, in particular the useful remainders
of cbf37fe (https://chromium-review.googlesource.com/176710)
- fix coding style
- mark unused variables explicitly unused
- remove some dead code
Change-Id: I354aaede8ce425ebe99d4c60c232feea62bf8a11
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/8577
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Specify a CBFS architecture value for MIPS and allow cbfstool to make
use of it.
Original-Change-Id: I604d61004596b65c9903d444e030241f712202bd
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/207971
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 7c4df61715df3767673841789d02fe5d1bd1d4a0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib30524f5e7e8c7891cb69fc8ed8f6a7e44ac3325
Reviewed-on: http://review.coreboot.org/8519
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For arm64, the machine type is arm64 in cbfstool, however it was displayed as
aarch64 in help message. This patch corrects it.
BUG=None
BRANCH=None
TEST=None
Original-Change-Id: I0319907d6c9d136707ed35d6e9686ba67da7dfb2
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204379
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 1f5f4c853efac5d842147ca0373cf9b5dd9f0ad0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I00f51f1d4a9e336367f0619910fd8eb965b69bab
Reviewed-on: http://review.coreboot.org/8144
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Allow add-stage to have an optional parameter for ignoring any section. This is
required to ensure proper operation of elf_to_stage in case of loadable segments
with zero filesize.
Change-Id: I49ad62c2a4260ab9cec173c80c0f16923fc66c79
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/7304
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
The aarch64 is not really an arm variant, it's sufficiently
different that it can be considered (for purposes of cbfs, certainly)
to be a new architecture.
Add a constant in cbfs.h and strings to correspond to it.
Note that with the new cbfstool support that we added earlier,
the actual use of aarch64 ELF files actually "just works" (at
least when tested earlier).
Change-Id: Ib4900900d99c9aae6eef858d8ee097709368c4d4
Reviewed-on: https://chromium-review.googlesource.com/180221
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit f836e14695827b2667804bc1058e08ec7b297921)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6896
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
In the process of rewriting cbfstool for ARM and using
a new internal API a regression was introduced that would
silently let you add an ARM payload into an x86 CBFS image
and the other way around. This patch fixes cbfstool to
produce an error in that case again.
Change-Id: I37ee65a467d9658d0846c2cf43b582e285f1a8f8
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/176711
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 8f74f3f5227e440ae46b59f8fd692f679f3ada2d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6879
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There are ARM systems which are essentially heterogeneous multicores where
some cores implement a different ARM architecture version than other cores. A
specific example is the tegra124 which boots on an ARMv4 coprocessor while
most code, including most of the firmware, runs on the main ARMv7 core. To
support SOCs like this, the plan is to generalize the ARM architecture so that
all versions are available, and an SOC/CPU can then select what architecture
variant should be used for each component of the firmware; bootblock,
romstage, and ramstage.
Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171338
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
ARM: Split out ARMv7 code and make it possible to have other arch versions.
We don't always want to use ARMv7 code when building for ARM, so we should
separate out the ARMv7 code so it can be excluded, and also make it possible
to include code for some other version of the architecture instead, all per
build component for cases where we need more than one architecture version
at a time.
The tegra124 bootblock will ultimately need to be ARMv4, but until we have
some ARMv4 code to switch over to we can leave it set to ARMv7.
Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7
Reviewed-on: https://chromium-review.googlesource.com/171400
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483)
Squashed two related patches for splitting ARM support into general
ARM support and ARMv7 specific pieces.
Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6782
Tested-by: build bot (Jenkins)
"cbfstool create -B bootblock -s size" (in this order)
would break bootblock selection.
Change-Id: I9a9f5660827c8bf60dae81b519c6f026f3aaa0f3
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6564
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
elfparsing.h serves as the header to working with the elf
parser. Additionally, only include what is needed by the other
files. Many had no reason to be including elf.h aside from fixing
compilation problems when including cbfs.h.
Change-Id: I9eb5f09f3122aa18beeca52d2e4dc2102d70fb9d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5370
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
In order for multiple tools to use the common code found
in common.c place the verbose variable within common.c's
compilation unit.
Change-Id: I71660a5fd4d186ddee81b0da8b57ce2abddf178a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5364
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Rather than using [hn]to[nh] whenever accessing a member of the CBFS
header, deserialize the header when opening the CBFS image. The header
is no longer a pointer inside the CBFS buffer, but a separate struct,
a copy of the original header in a host-friendly format. This kills
more of the ntohl usage.
Change-Id: I5f8a5818b9d5a2d1152b1906249c4a5847d02bac
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5121
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Now that unused functions have been removed, the global "arch" is only
used in very few places. We can pack "arch" in the "param" structure
and pass it down to where it is actually used.
Change-Id: I255d1e2bc6b5ead91b6b4e94a0202523c4ab53dc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5105
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This completes the improvements to the ELF file parsing code. We can
now parse section headers too, across all 4 combinations of word size
and endianness. I had hoped to completely remove the use of htonl
until I found it in cbfs_image.c. That's a battle for another day.
There's now a handy macro to create magic numbers in host byte order.
I'm using it for all the PAYLOAD_SEGMENT_* constants and maybe
we can use it for the others too, but this is sensitive code and
I'd rather change one thing at a time.
To maximize the ease of use for users, elf parsing is accomplished with
just one function:
int
elf_headers(const struct buffer *pinput,
Elf64_Ehdr *ehdr,
Elf64_Phdr **pphdr,
Elf64_Shdr **pshdr)
which requires the ehdr and pphdr pointers to be non-NULL, but allows
the pshdr to be NULL. If pshdr is NULL, the code will not try to read
in section headers.
To satisfy our powerful scripts, I had to remove the ^M from an unrelated
microcode file.
BUG=None
TEST=Build a peppy image (known to boot) with old and new versions and verify they are bit-for-bit the same. This was also fully tested across all chromebooks for building and booting and running chromeos.
BRANCH=None
Change-Id: I54dad887d922428b6175fdb6a9cdfadd8a6bb889
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/181272
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: http://review.coreboot.org/5098
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
In the great tradition of LinuxBIOS this allows adding
a kernel as payload. add-payload is extended to also
allow adding an initial ramdisk (-I filename) and a
command line (-C console=ttyS0).
Change-Id: Iaca499a98b0adf0134e78d6bf020b6531a626aaa
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/3302
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This simplifies storing SeaBIOS parameters in CBFS.
Change-Id: I301644ba0d7a9cb5917c37a3b4ceddfa59e34e77
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/3733
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Aaron Durbin