Trackpad GPIO configuration does not align with the IRQ configuration
in the devicetree. Configure the trackpad GPIO to generate SCI on
falling edge.
BUG=None
TEST=Build and boot to OS in Nipperkin. Ensure the trackpad is
functional. Suspend the device and wake it using trackpad. Perform
suspend/resume sequence for 100 iterations.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: If4324e09535d2676c8a8c6643604227eeaba0fe8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
For USB ports, we want to use custom PLD fields with more details to
indicate physical location. Custom PLD will also be added to other brya
variants in the future as we figure out physical port locations on those
devices. Type A port on MLB is removed since it is no longer used.
BUG=b:216490477
TEST=emerge-brya coreboot & SSDT dump in Brya test device
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Iea975a4f436a204d4edd19fad0f5652fb44c6301
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
ADL and Sabrina have different advisory regarding encoding the bus
width. Encode the bus width as per the respective advisories.
BUG=b:211510456
TEST=Build spd_gen and ensure that the bus width is encoded as expected.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ia12a5bd8f70a70ca8a510ecf00f6268c6904ec25
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Sabrina uses the same MMIO_CONF_BASE MSR as the previous AMD CPUs to
configure the PCI MMCONF base address.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7e3064bab5ca1e277b04f9aae98f9adabce75399
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This will make debugging boot failures with a non-serial firmware
easier. If we encounter an error that requires a reboot, this will dump
the entire CBMEM contents onto the UART. This is especially helpful
during S0i3 resume because the PSP verstage console logs are not
exposed anywhere.
BUG=b:215599230
TEST=Cause verstage error in S0i3 with non-serial firmware and see that
the verstage logs were dumped to the UART before rebooting.
Entering PSP verstage S0i3 resume
tpm_setup failed rv:1
VB2:vb2api_fail() Need recovery, reason: 0x3f / 0xcc
Saving nvdata
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I908037527206cc7bed2302fab60b2912d6dabc73
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Now that PSP verstage can directly write to the UART, we no longer need
to manually dump the cbmem contents.
Ideally if we can get picasso to add support for mapping the UART, or
if we implement bit banging we can delete this functionality
completely.
BUG=b:215599230
TEST=Boot guybrush and verify verstage logs aren't printed twice
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Id70b24625c3b2f3d6fe470cf227a0083f5b974f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This will allow PSP verstage to write logs to the serial console. We
are no longer dependent on using a serial enabled PSP boot loader.
Ideally we would delete this psp printk and use the standard printk.
Since picasso doesn't currently support mapping the UART though, I'll
keep it for now.
BUG=b:215599230
TEST=Boot guybrush and verify PSP logs are output on serial console
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibd77cc754fae5baccebe7adc5ae0790c79236d26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
The Sabrina PSP doesn't support mapping the UART, so add a dummy
function to return NULL.
BUG=b:215599230
TEST=None
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idad8e4874e78bb96730feecb5a7b17334d12217c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
The Picasso PSP doesn't support mapping the UART, so add a dummy
function to return NULL.
BUG=b:215599230
TEST=Build and boot morphius
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie1f033ff86ebb0f755a9a0b6ff293aa3c8bbbeb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This will allow directly using the UART console. On PSP releases that
don't support mapping the UART, we will just return NULL which is
perfectly acceptable.
BUG=b:215599230
TEST=Boot guybrush and verify verstage can print to the console
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic8d7f0fe00794a715756f92e3fb32c6b512cb8aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61607
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that the console system itself will clearly differentiate loglevels,
it is no longer necessary to explicitly add "ERROR: " in front of every
BIOS_ERR message to help it stand out more (and allow automated tooling
to grep for it). Removing all these extra .rodata characters should save
us a nice little amount of binary size.
This patch was created by running
find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';'
and doing some cursory review/cleanup on the result. Then doing the same
thing for BIOS_WARN with
's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi'
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Lance Zhao
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
A common use case when running coreboot on production systems is that
only the CBMEM console (the one with the least impact on boot speed) is
enabled. In this case, some of the code in the console subsystem has no
effect. Due to the way it's all genericized over multiple consoles and
tied together with function pointers, not all of this can be
compile-time eliminated automatically, so this patch adds a little
helper to facilitate that. This results in roughly 200 (compressed)
bytes of savings per stage on an arm64 system.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I1d5b8bda80d02a13ee0b7835e0805c4319fd21d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
In order to provide the same loglevel prefixes and highlighting that
were recently introduced for "interactive" consoles (e.g. UART) to
"stored" consoles (e.g. CBMEM) but minimize the amont of extra storage
space wasted on this info, this patch will write a 1-byte control
character marker indicating the loglevel to the start of every line
logged in those consoles. The `cbmem` utility will then interpret those
markers and translate them back into loglevel prefixes and escape
sequences as needed.
Since coreboot and userspace log readers aren't always in sync,
occasionally an older reader may come across these markers and not know
how to interpret them... but that should usually be fine, as the range
chosen contains non-printable ASCII characters that normally have no
effect on the terminal. At worst the outdated reader would display one
garbled character at the start of every line which isn't that bad.
(Older versions of the `cbmem` utility will translate non-printable
characters into `?` question marks.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I86073f48aaf1e0a58e97676fb80e2475ec418ffc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This patch adds ANSI escape sequences to highlight a log line based on
its loglevel to the output of "interactive" consoles that are meant to
be displayed on a terminal (e.g. UART). This should help make errors and
warnings stand out better among the usual spew of debug messages. For
users whose terminal or use case doesn't support these sequences for
some reason (or who simply don't like them), they can be disabled with a
Kconfig.
While ANSI escape sequences can be used to add color, minicom (the
presumably most common terminal emulator for UART endpoints?) doesn't
support color output unless explicitly enabled (via -c command line
flag), and other terminal emulators may have similar restrictions, so in
an effort to make this as widely useful by default as possible I have
chosen not to use color codes and implement this highlighting via
bolding, underlining and inverting alone (which seem to go through in
all cases). If desired, support for separate color highlighting could be
added via Kconfig later.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I868f4026918bc0e967c32e14bcf3ac05816415e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
SPL: Security Patch Level
The data in SPL is used for FW anti-rollback, preventing rollback of
platform level firmware to older version that are deemed vulnerable
from a security point of view.
BUG=b:216096562
Change-Id: I0aa456b8b4eec506fbb319293f0903b293325cb0
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
SPL: Security Patch Level
The data in SPL is used for FW anti-rollback, preventing rollback of
platform level firmware to older version that are deemed vulnerable
from a security point of view.
BUG=b:216096562
Change-Id: I4665f2372ccd599ab835c8784da08cde5558a795
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
In an attempt to make loglevels more visible (and therefore useful,
hopefully), this patch adds a prefix indicating the log level to every
line sent to an "interactive" console (such as a UART). If the code
contains a `printk(BIOS_DEBUG, "This is a debug message!\n"), it will
now show up as
[DEBUG] This is a debug message!
on the UART output.
"Stored" consoles (such as in CBMEM) will get a similar but more
space-efficient feature in a later CL.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ic83413475400821f8097ef1819a293ee8926bb0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add FM350GL 5G WWAN support using drivers/wwan/fm and addtional PM
features from RTD3.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I6413f106ce6ef6c895d4861f4dbe26ac9a507d25
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Support PXSX._RST and PXSX.MRST._RST for warm and cold reset.
PXSX._RST is invoked on driver removal.
build dependency:
soc/intel/common/block/pcie/rtd3
This driver will use the rtd3 methods for the same parent in the device
tree. The rtd3 chip needs to be added on the same root port in the
devicetree separately.
Test:
Add chip entry to the corresponding root port and check PXSX Device
is generated in ssdt.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I1e0b9fd405f6cfb1e216ea27558bb9299a09e566
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61354
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Optional feature to provide mechanism to skip _OFF and _On execution.
- It is used for the device to skip _OFF and _ON during device driver
reload.
- OFSK is used to skip _OFF Method at the end of device driver removal.
- ONSK is used to skip _ON Method at the beginning of driver loading.
- General flow use case:
1. Device driver is removed by 'rmmod' command.
2. Device _RST is called. _RST perform reset.
3. Device increments OFSK in _RST to skip the following _OFF invoked by
OSPM.
4. OSPM invokes _OFF at the end of driver removal.
5. _OFF sees OFSK and skips current execution and decrements OFSK so that
_OFF will be executed normally next time.
6. _OFF increments ONSK to skip the following _ON invoked by OSPM.
7. Device driver is reloaded by 'insmod/modprobe' command.
8. OSPM invokes _ON at the beginning of driver loading.
9. _ON sees ONSK and skip current execution and decrements ONSK so that
_ON will be executed normally next time.
- In normal case:
When suspend, OSPM invokes _OFF. Since OFSK is zero, the device goes
to deeper state as expected.
When resume, OSPM invokes _ON. Sinc ONSK is zero, the device goes
to active state as expected.
- Generated changes:
PowerResource (RTD3, 0x00, 0x0000)
Name (ONSK, Zero)
Name (OFSK, Zero)
...
Method (_ON, 0, Serialized) // _ON_: Power On
{
If ((ONSK == Zero))
{
...
}
Else
{
ONSK--
}
}
Method (_OFF, 0, Serialized) // _OFF: Power Off
{
If ((OFSK == Zero))
{
...
}
Else
{
OFSK--
ONSK++
}
}
Test:
Enable and verify OFSK and ONSK Name objects and the if-condition logic
inside _OFF and _ON methods is added.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ic32d151d65107bfc220258c383a575e40a496b6f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add L23 enter/exit, modPHY power gate, and source clock control methods.
DL23: method for L2/L3 entry.
L23D: method for L2/L3 exit.
PSD0: method for modPHY power gate.
SRCK: method for enabling/disable source clock.
These optional methods are to be used in the device ACPI to construct
flows with root port's power management functions.
Test:
Enable and verify DL23, L23D, PSD0, SRCK methods in ssdt.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I79de76f26c8424b036cb7d2719df68937599ca2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add support to generate SPD binary for Sabrina SoC. Mainboards using
Sabrina SoC are planning to use LP5 memory technology. Some of the SPD
bytes expected by Sabrina differ from the existing ADL. To start with,
memory training code for Sabrina expects SPD Revision 1.1. More patches
will follow to accommodate additional differences.
BUG=b:211510456
TEST=make -C util/spd_tools.
Generate SPD binaries for the existing memory parts in
lp5/memory_parts.json and observe that SPDs for Sabrina is generated as
a separate set without impacting the ADL mainboards.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I2a2c0d0e8c8cbebf3937a99df8f170ae8afc75df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
- Enable Acoustic noise mitigation
- Set slow slew rate VCCIA and VCCGT to 8
- Set FastPkgCRampDisable VCCIA and VCCGT to 1
BUG=b:201818726
TEST=build FW and system power on.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I881ded944530b21d1c5e306089d32387c9c258b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
- set GPSE-77 (Maxim jack detect) to NC for variants using Realtek audio
- set GPSW-37 to NC for all variants (not used for LPE audio)
- set GPSW-95 (Realtek jack detect) to NC for variant using Maxim audio
- set GPSE-77 as maskable on variant using Maxim audio, to match mask setting
for jack detect GPIO on other variants
- set GPSE-81 as maskable on CELES to prevent interrupt storm (likely due to
change in cherryview pinctrl driver circa kernel v3.18 which no longer masks
all interrupts at init)
Change-Id: I50d4b3516eba8906042bb8dea768b229afcf11ea
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar Organization <coolstarorganization@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add ID "AMDI5619" for machine driver to support ALC5682I-VS + ACL1019
combination.
BUG=b:211835769
TEST=Build dewatt, codec is functional with new machine driver.
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ic6cb3bda7b8f1b96485f7b868200c94e6c720c7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Yu-hsuan Hsu <yuhsuan@google.com>
This will allow coreboot to directly write to the UART controller.
BUG=b:215599230
TEST=Try mapping the uart on guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibd346cec2994e612f2901bb91d572982ce2ed5e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
The patch defines enum values for small and big cores and uses them
to indicate the big or small core.
TEST=Verify the build for Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I740984a437da9d0518652f43180faf9b6ed4255e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61459
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Fill in devicetree for nissa baseboard based on schematics.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
TEST=abuild -a -x -c max -p none -t google/brya -b nereid
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I6cd332fd05fde19078ebc4bd2797580abfb76f3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The UART8250_FCR_TRIGGER bits are bits 6 and 7 in the register, so
rewrite the mask and constants as constants shifted by 6.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0663c1a641355b7bfb59f41479d17117178fb895
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
UART8250_FCR_RXSR is a redefinition of UART8250_FCR_CLEAR_RCVR,
UART8250_FCR_TXSR a redefinition of UART8250_FCR_CLEAR_XMIT and
UART8250_LCR_BKSE a redefinition of UART8250_LCR_DLAB. None of those
redefinitions are used, so just drop them.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6b9edae67180b04ff1c887c5742c07c774fc9c59
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Sabrina is compatible with the common AMD UART block and also with the
DRIVERS_UART_8250MEM_32 driver it selects.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I432414c1d501ffbd1047b378996e06d281a9fb6f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
A lot of soc code requires a definition of apm_control, which
smm/smi_trigger.c provided for !HAVE_SMI_HANDLER, but is not added as
a build target.
Fixes building Q35 without smihandler.
Change-Id: Ie57819b3d169311371a1caca83c9b0c796b46048
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
This is just the amount of cpus so rename it for simplicity.
Change-Id: Ib2156136894eeda4a29e8e694480abe06da62959
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Both the relocation handler and the permanent handler use the same
stacks, so things can be simplified.
Change-Id: I7bdca775550e8280757a6c5a5150a0d638d5fc2d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Sabrina is compatible with the common AMD SOC_AMD_COMMON_BLOCK_IOMMU
code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4c2e8553fde9467ca1b5e9085e36c33d138b7156
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
There is no need to have the iommu_set_resources function which only
calls pci_dev_set_resources, so assign pci_dev_set_resources directly to
the set_resources function pointer field in the iommu_ops struct.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I59c20e61a36fcc11b59d786139b4745ff662e560
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This comment was added with the AMD family 15h Trinity IOMMU support in
commit 88ebbeb7e2 and looks like a copy of
the comment about the subtractive decode ranges in the LPC device. The
IOMMU doesn't have any subtractively decoded I/O or MMIO ranges and this
is also not what the code does. This resource is the MMIO region to
configure the IOMMU instead, so fix the comment in all copies of the
IOMMU support code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2e1e3a46b839b9e58b836932c1bc9b41b1b1dc02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Sabrina is compatible with the common AMD ACPIMMIO function block
mapping and access functions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I890375654a9cb1156e481c5586007ac81ab84120
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The PM2 ACPIMMIO region should only be accessed with 8 bit accesses.
Using 16 or 32 bit read accesses will return the data from the first
byte for all 2 or 4 bytes and 16 or 32 bit write accesses will result in
only the first byte being written which is both unexpected behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5ace50d3b81b5bf3ea3b10aa02f25c58a6ea99b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Bit 23 in the PM_RST_STATUS register is called LtReset on Stoneyridge
and ShutdownMsg on Picasso/Cezanne/Sabrina. Bit 30 is reserved on
Stoneyridge and defined as SdpParityErr on the newer SoCs. Bit 31 is
only defined for Sabrina. Since the default value of undefined bits is 0
it isn't a problem to have descriptions for reserved reset status bits
on some SoCs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0782116d327fcad3817a10eb237ac6c8294846b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Karthikeyan Ramasubramanian