Newer versions of IASL didn't like our IO constructs. Use
FixedIO instead, it's also shorter.
Change-Id: I9364d993ecb71ffd84c0313ca1e2f870af59eb24
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/934
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
rename from mainboard_apm_cnt to mainboard_smi_apmc to match the function
naming scheme of the other handlers. Add prototype for mainboard_smi_sleep
(mainboard specific S3 sleep handlers in SMM) that is required by Sandybridge.
Change-Id: Ib479397e460e33772d90d9d41dba267e4e7e3008
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/933
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
In order to use the generic microcode update code in the bootblock, cpu/cpu.h
needs ROMCC guards. Also, delete the unused struct device declaration and move
the struct bus declaration to where it's used.
Change-Id: I0cc731c555593946e931a680ec93994932530599
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/932
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
There is no reason for this to be a top level directory.
Some stuff from lib/ should also be moved to drivers/
Change-Id: I3c2d2e127f7215eadead029cfc7442c22b26814a
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/939
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
- Added a union to identify the byte that was reserved in the
Generic Address Structure from ACPI 2.0 to ACPI 2.0b as the
Access Size byte for ACPI 2.0c to ACPI 5.0
- Added various #defines for use in the FADT
- Added a couple of comments for the #endifs
Change-Id: I294ddfd89fcb0ad88bb6e52d911f807d84671e82
Signed-off-by: Martin L Roth <martin@se-eng.com>
Reviewed-on: http://review.coreboot.org/930
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Most subsystems print their name with a colon, and then the
message. Do the same thing for the microcode update code.
Also, each microcode update has a date header. Print the
date from that header to make it easier to determine whether
you're running the latest microcode.
Change-Id: Ic22947c4b9f0502d4091d975e1f1ab42f70aa1aa
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/929
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: build bot (Jenkins)
- add GPLv2 + copyright header after talking to Ron
- "bits" in struct microcode served no real purpose but
getting its address taken. Hence drop it
- use asm volatile instead of __asm__ volatile
- drop superfluous wrmsr (that seems to be harmless but
is still wrong) in read_microcode_rev
- use u32 instead of unsigned int where appropriate
- make code usable both in bootblock and in ramstage
- drop ROMCC style print_debug statements
- drop microcode update copy in Sandybridge bootblock
Change-Id: Iec4d5c7bfac210194caf577e8d72446e6dfb4b86
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/928
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Instead of opaque numbers like (1<<29), use
symbols like CR0_NoWriteThrough.
Change-Id: Id845e087fb472cfaf5f71beaf37fbf0d407880b5
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/833
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Without that fix the screen flickered with resolutions superior
to 832x624 because the cpu_ht_freq was 0 (so it ran at 200Mhz).
Change-Id: I1056d76b1d77f6177594ed9d03ecc5ae7b3c2c13
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: http://review.coreboot.org/900
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Move final build results under $(objcbfs).
Move intermediate files under $(objgenerated).
Remove use of sed -i.
Change-Id: Ie035a1544848b26514a197c340f470201065b8d5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/859
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
$(obj)/coreboot_ap -> $(objcbfs)/coreboot_ap.elf
It is really a ramstage for AP CPU and not a romstage, it is not
enabled for any mainboard by default, and it doesn't compile
even if enabled.
Change-Id: Ifb9c5cb6df65309660b000876cf6a9a3da9b6839
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/840
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Otherwise it breaks 486 boards without RDTSC, ending with
exception 6.
It ends like this on bifferboard:
Jumping to image.
Unexpected Exception: 6 @ 10:001007e3 - Halting
Code: 0 eflags: 00000016
eax: 001001fe ebx: 00100118 ecx: 00000000 edx: 00108e00
edi: 0010aaf8 esi: 00000000 ebp: 00117ff4 esp: 00117fd8
Please keep in mind 486, dont use rdtsc/cpuid in generic code, or if you do make sure make it non-default option.
Change that broke it: http://review.coreboot.org/#/c/749/7/src/boot/hardwaremain.c
Change-Id: I974b25377c20a11430b35b24dcc275d8cbfd2b9a
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/925
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This commit adds the following to MA785GM:
Refactor some alignment handling
Unify Local APIC address definitions
ACPI: More ../../.. removal
Remove old AMD fam10 fixme comment
amd/sb700: Move HAVE_HARD_RESET to southbridge
Change-Id: I85a95bb641375dd61d1f58a2f2f972771d1d9ad9
Signed-off-by: Alec Ari <neotheuser@ymail.com>
Reviewed-on: http://review.coreboot.org/922
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Add early_smbus.c for romstage-y list and remove respective
include on mainboard romstage.c files.
Tested on AOpen board.
Change-Id: I1c7e6cb32e3a9d7cc9b6037dc27e59149d492001
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/909
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds coreboot support for the
GIGABYTE MA785GM-US2H board.
This port now removes all dead code in
the previous patch set, and also boots Fedora 16
on x86_64 (Phenom II X4 955 BE)
On-board audio causes spurious interrupts and
the kernel gets stuck in an infinite loop.
AtomBIOS on RadeonHD video cards does not function
and causes another infinite loop. radeon.modeset=0
must be set. acpi=off must also be set.
With those kernel command line options set,
Fedora 16 makes it to the login screen. USB
mouse and keyboard don't work though. several
USB error codes on boot-up. PS/2 should.
Change-Id: I58a7083a023ebf7373b6ded2e9f0adda7ab76dea
Signed-off-by: Alec Ari <neotheuser@ymail.com>
Reviewed-on: http://review.coreboot.org/476
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The Alix6 is very similar to the alix2, differing in having 1 mini-PCIe
slot (USB 2.0 only), an RFKILL GPIO line going to that slot, and 1 or 2
SIM sockets.
Change-Id: I19e4e756966e60bb0310c19286654d3d579b8850
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reviewed-on: http://review.coreboot.org/521
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Commit d4d5e4d3e1 contains #ifdef instead
of #if, making the FSB/serial bus selection for APIC always select serial
bus. The bug is harmless on most chipsets because the bit is often RO,
but it breaks at least on VIA K8T890.
Change-Id: I89c4855922199eca7f921c3e4eb500656544c8e5
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/921
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
It's gone from the build. Drop the code as well.
Change-Id: Ice6fcb39565273360a576bda4826f16088f4666c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/914
Tested-by: build bot (Jenkins)
Reviewed-by: Vikram Narayanan <vikram186@gmail.com>
Comment out the id variable which is used in a commented code
block.
Change-Id: Ib002d57e5314971f0589d04b7e451ab7d7079f53
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/913
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Final build results (.elf, .debug, .map) are to be placed under
directory $(objcbfs), the default is:
$(obj)/cbfs/$(CONFIG_CBFS_PREFIX)/
Intermediate build results (.o, .s, .S, .inc, .ld) that do not have
a clear one-to-one relation to a file under src/ are to be placed
under directory $(objgenerated), the default is:
$(obj)/generated
Also defines implicit rules for final build results:
.debug -> .elf and .map
.elf -> .bin
Change-Id: I448c6b7c9a952e54170df42091d7db438025a795
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/858
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
No longer include northbridge files directly in the source for
mainboard romstage.c and fix includes.
Also make required adjustments to function declarations.
Change-Id: Iafdcc0766ed44c64cc628e5935eef2c6372f5f22
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/906
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
It takes about 3 seconds to scrub 8GiB DDR266 RAM.
After ECC scrub XIP cache is disabled for system stability. There is
very little to do in romstage after ECC scrub, especially when RAM
debug messages are turned off. So the delay caused by this is hardly
noticeable.
Cache for complete ROM is re-enabled before ramstage is decompressed,
and it has no unstability issues. So the code required to re-enable
cache for ROM currently already exists in cache-as-ram_ht.inc.
A Kconfig option HW_SCRUBBER enables the scrub to be run on hard
reboots and power-ons.
Change-Id: Icf27acf73240c06b58091f1229efc0f01cca3f85
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/905
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
As cmos.layout parsing capabilities are already there in nvramtool,
use those than using build_opt_tbl.c. Add binary and header file
generation in nvramtool. Make appropriate changes to Makefile.inc.
Change-Id: Iaf3f5d4f51451aeb33c92800a0c895045f2388cf
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/898
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This change reverts :
Change Id I4fdb281b2b684ab5fea999aae28ca08dce24da4d
The wbinvd (or invd) should not be needed at the reset vector. It
causes problems with some CPUs AP init. If there is a problem with
a specific CPU and it must be done at this location, it should be
added conditionally.
Change-Id: I85b71b0a07f039359a4fb889aaa05c75fff619be
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/908
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Drop comments (from e7501 era) which no longer seem to apply with
e7505. Write the semi-constant D0:F0 table as code. Some register
settings seem to be in different order compared with vendor BIOS,
and will be handled by follow-up patches.
Split RCOMP register copy function in two parts.
Drop some uses of inline and local_mdelay().
Change-Id: I8739d3b2bbad5861118e8b16ccea1dd86991204f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/896
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Hope no more blank issue is got from future copy-paste.
Change-Id: I5eb50e8232e339e7039a15054606aaff6b7ebc52
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/907
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
S3.rom is useless for all the other boards which don't use flash to
save sleep/wakeup settings. AGESA-based boards other than persimmon
haven't been validated the S3 resume. They don't need S3.rom yet.
Change-Id: I12693e9556ca6f8e0d80b2ab2dca5c85bdb97685
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/902
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The name of processor created by AGESA is P00n, whose P is
BLDCFG_PROCESSOR_SCOPE_NAME(is 'C' if it is undefined.) and n starts
from 0. The dsdt should be aligned with that.
This feature has only been tested on persimmon. The changes on all the
other boards were propagated.
Change-Id: I8c3fa4b94406d530d2bed8e9a1f42b433bbec3ec
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/884
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
During normal boot, the cbmem is uninitialized. So it is illegal to find
the heap in cbmem.
Change-Id: I8b5e1dbf1124819ed91693a86a6dbe41aea109e5
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/904
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Don't test executable files nor object files, even if the former might
render the test useless on win32 (executable bit isn't well defined there).
Change-Id: Ifb6fc83243289d266f439316c14b6b009f8da5fc
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/890
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Makes the code a bit more readable, IMO. There is no clean way
to implement this as the affected registers are undocumented.
Seems ROMCC cannot handle the enum. Also any of my future changes
would not be even abuild tested as there is no longer a board with
ROMCC and this chipset. E7505 chipset is CAR only from now on.
Change-Id: I0e2d8ba0c7ed7cce46d9eafb8d8badf04cf75f7a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/895
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
- Add documentation for COMPILER_GCC, and COMPILER_LLVM_CLANG.
- SCANBUILD_ENABLE, CCACHE: Amend documentation.
- SCANBUILD_REPORT_LOCATION: Document default dir, names of scan-build dirs.
- INCLUDE_CONFIG_FILE: Add more verbose docs, show how to use it.
- Fix typos/cosmetics/indentation, improve wording on some items.
Change-Id: I6b67b2c777868e4421405caaffe6631e69dddad2
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://review.coreboot.org/893
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Persimmon is the demo board. Tested by Linux and Windows 7.
Change-Id: I5ded942b51e63ebeb08ace0b202b4ed239b0c14c
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/624
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
1. Move the Stack to high memory.
2. Restore the MTRR before Coreboot jump to the wakeup vector.
Change-Id: I9872e02fcd7eed98e7f630aa29ece810ac32d55a
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/623
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
HEST feature starts from ACPI 4.0.
HEST is one of four kinds of tables of ACPI Platform Error
Interfaces (APEI). In Windows world, APEI is called Windows Hardware
Error Architecture (WHEA).
APEI consists of four separate tables:
1. Error Record Serialization Table (ERST)
2. BOOT Error Record Table (BERT)
3. Hardware Error Source Table (HEST)
4. Error Injection Table (EINJ)
All these 4 tables have the same header as FADT, MADT, etc. They are
pointed by RSDP.
For the HEST, it contains the error source. The types of them are
defined as
type description
1. Machine Check Exception (MCE)
2. Corrected Machine Check (CMC)
3. NMI Error
6. PCI Express Root Port AER
7. PCI Express Device AER
8. PCI Express Bridge AER
9. Generic Hardware Error Source
Error source types 3, 4, and 5 are reserved for legacy reasons and
must not be used.
Currently AMD board only provide part of "Machine Check
Exception (MCE)" & Corrected Machine Check (CMC)". we need to provide
the header of each error source. Other types of Error Sources is in
TODO list.
Only persimmon is tested. Linux can add HEST feature. The dmesg says,
ACPI: HEST 0000000066fe5010 00198 (v03 CORE COREBOOT 00000000 CORE 00000000)
......
HEST: Table parsing has been initialized.
No more message is got.
Windows can boot with this patch. Havent found a way to test it.
Change-Id: I447e7f57b8e8f0433a145a43d0710910afabf00f
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/888
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: build bot (Jenkins)
This binary is required for anyone who wishes to build a
sandybridge mainboard.
Change-Id: I779ef5e2b77166b81cb05eada37291368e74fbb6
Signed-off-by: Ron Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/897
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
"This file must be in UNIX format" is not valid anymore.
Change-Id: I86169b12e7db159c1d3f380b0434874e9b6f5274
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/899
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
While at it, also make the array static - no need to export this symbol.
Change-Id: I7fdcda2b80150b6f32b5bc3e0957998a4fd43fce
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: http://review.coreboot.org/892
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Stefan Reinauer