This patch will add new board variant to enable MCHP1727 EC Card
for MTL-RVP
BUG=b:262800416
BRANCH=none
TEST=check if you can observe MEC EC option as part of make menuconfig.
Able to boot to ChromeOS with Microchip EC.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ie0d3c37bcab5e4b90a131e17996c4b6dcbae7d5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
BUG=b:271373437
BRANCH=none
TEST=Verify USB-A device could wake up Aurash.
Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com>
Change-Id: I67fc02d6c5660e0e3d1ab95bbda8ace1dc14b524
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73414
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch increases FW_CONFIG for USB_DB to 3-bits.
BUG=b:273346973
TEST=Able to build and boot google/rex with Proto 2 SKU
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib07ba1d54e7f7e2b09a99438529e503d9c9edb7d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the
Kernel when an EC panic occurs. If system safe mode is also enabled
on the EC, the kernel will have a short period to extract and save info
about the EC panic.
BUG=b:268377440
BRANCH=firmware-dedede-13606.B
TEST=Observe kernel ec panic handler run when ec panics
Change-Id: I24f929ae60a406d0091956dc6cab3e2876ca23e9
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that the driver skips
initial probe during kernel boot and prevent privacy LED blink.
BUG=b:268607999
TEST=Build and boot rex proto1 to OS and verify privacy LED behavior.
Change-Id: Ife849f7407b02867ddb992d7eebb08b0b44aecc8
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kiran2 Kumar <kiran2.kumar@intel.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
With newer xeon_sp processors, the concept of "north bridge" became
obsolete, instead uncore should be used. Therefore we use uncore_acpi.c
(instead of nb_acpi.c) going forward.
Change-Id: I91ec9023152996bf9f2300a369aff3c4f19d75fd
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
The MP2 firmware doesn't do anything useful when booting into recovery
mode, so don't include it in the RO image if vboot is enabled.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5afbf7e9e730e6951c416f3a3ca75f69a22099cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73660
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When doing coreboot builds, we can set V=1 to see all of the make info
printed as the compile is happening. Use this flag to set the debug
flag for amdfwtool so it doesn't have to be enabled separately.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5b05cbc9f9b540a174db479822af657cf35733de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73658
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The regex getting rid of lines containing a '*' didn't match anything
in any configs, so get rid of it. There's nothing in the amdfwtool
dataparse.c file that would match it either.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I05aaf46cfb479cebab9234a47574073335984a5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
After adding the ability to add paths into the amdfw.cfg file for the
amdfwtool, the dependency generation needs to be updated to not add
the firmware location in front of those values.
This also allows us to filter out the MP2 binaries as dependencies
based on whether or not the Kconfig value is set.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I3a9b9c8246808dc60020a32a7d9d926bc5e57ccd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
If recovery APCB is not passed, amdfwtool will build amdfw*.rom with
AMD_BIOS_APCB_BK entry pointing to the same offset as AMD_BIOS_APCB
entry. This will help to save 40 KiB flash space in each FW slot. On
ChromeOS, this means saving ~120 KiB flash space.
BUG=b:240696002
TEST=Build and boot to OS in Skyrim.
Change-Id: Ib3bbc1eededae20b2cd48f514722a207c46536a0
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73662
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch selects `X86_CLFLUSH_CAR` config for running `clflush`
to invalidate the cache region based on commit 3134a81 for boot
performance improvement.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I97c8c07db9b44aa89b433e7962ec77c8501ecaa9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This patch selects `X86_CLFLUSH_CAR` config for running `clflush`
to invalidate the cache region based on commit 3134a81 for boot
performance improvement.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I8f8a0bfeaea508d3b4ad1b3fe2e68742cbab5570
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73687
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch selects `X86_CLFLUSH_CAR` config for running `clflush`
to invalidate the cache region based on commit 3134a81 for boot
performance improvement.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Icd3d16ab2cb34dc81fc12ec139c52ecaa170528d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73686
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch selects `X86_CLFLUSH_CAR` config for running `clflush`
to invalidate the cache region based on commit 3134a81 for boot
performance improvement.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I1fe6072a3c23a02c9a691406f179bfc8f0f18a93
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Currently on power key long press, PMIC will be reset. It would cause
an unwanted reset pulse in the power-off sequence. To match expected
sequence, change PMIC behavior to "force shutdown".
BUG=b:271771606
TEST=long-pressing power key doesn't trigger PMIC_AP_RST_L pulse
BRANCH=corsola
Change-Id: I9ab35d82e57f43bac99fa8bd7bb69fcf52250311
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: jason-ch chen <jason-ch.chen@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73705
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Currently on power key long press, PMIC will be reset. It would cause
an unwanted reset pulse in the power-off sequence. To match expected
sequence, change PMIC behavior to "force shutdown".
BUG=b:271771606
TEST=long-pressing power key doesn't trigger PMIC_AP_RST_L pulse
Change-Id: I1626892fd582dfab8fe1c1ede1da00549bc97142
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: jason-ch chen <jason-ch.chen@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73704
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Modify USB C1 mux_conn to 1. It should match ec settings.
BUG=b:272394875, b:272667290
BRANCH=firmware-brya-14505.B
TEST=Plug USB-C hub in USB C1 and could recognize USB drive and hdmi.
Change-Id: I61b77405d1790b044174cef954e5bf910141f424
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
According to file thermal_table_0310, adjust the STT settings.
BRANCH=none
BUG=b:257149501
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the thermal team has verified.
Change-Id: If4500c85dcea051aca15602f1fb4b5ec80b73e67
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Chao Gui <chaogui@google.com>
Configure the I2C bus high and low time for audio.
BUG=b:271804915
BRANCH=dedede
TEST=Build and confirm I2C clock for audio is between 380 kHz and 400
kHz
Change-Id: I2987a39abc5527844424edfa1cf70d5c5cea5357
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Create the uldren variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:271513530
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_ULDREN
Change-Id: Ibbcd34fb4ef1f7464f0c94d2fcf75280c3eed6be
Signed-off-by: van_chen <van_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73680
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Intel Meteor Lake decides to enable early caching of the TOM region to
optimize the boot time by selecting `SOC_INTEL_COMMON_BASECODE_TOM`
config.
TEST=Able to build and boot google/rex to ChromeOS and reduce the boot
time by 77 ms.
Without this patch:
950:calling FspMemoryInit 936,811 (19,941)
951:returning from FspMemoryInit 1,041,935 (105,123)
With this patch:
950:calling FspMemoryInit 905,108 (20,103)
951:returning from FspMemoryInit 964,038 (59,929)
Change-Id: Iebb3485b052386b43d5bccd67a04e6115cbcc20d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73274
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch enables early caching of TOM region to optimize the boot
time if valid mrc cache is found (i.e. except the first boot after
flashing/updating few AP firmware image).
TEST=Able to build and boot google/rex to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia575ad0f99d5b0fd015e40b0862e8560700f6c83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This patch implements a module that can store the top_of_ram (TOM)
address into non-volatile space (CMOS) during the first boot and
use it across all consecutive boot.
As top_of_ram address is not known until FSP-M has exited, it
results into lacking of MTRR programming to cache the 16 MB TOM,
hence accessing that range during FSP-M and/or late romstage causing
long access times.
Purpose of this driver code is to cache the TOM (with a fixed size of
16MB) for all consecutive boots even before calling into the FSP.
Otherwise, this range remains un-cached until postcar boot stage
updates the MTRR programming. FSP-M and late romstage uses this
uncached TOM range for various purposes (like relocating services
between SPI mapped cached memory to DRAM based uncache memory) hence
having the ability to cache this range beforehand would help to
optimize the boot time (more than 50ms as applicable).
TEST=Able to build and boot google/rex to ChromeOS.
Without this patch:
950:calling FspMemoryInit 936,811 (19,941)
951:returning from FspMemoryInit 1,041,935 (105,123)
With this patch:
950:calling FspMemoryInit 905,108 (20,103)
951:returning from FspMemoryInit 987,038 (81,929)
Change-Id: I29d3e1df91c6057280bdf7fb6a4a356db31a408f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73272
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Documentation and hardware differ in the number of MCA bank names, so
remove the excess ones to prevent a "CPU has an unexpected number of MCA
banks!" warning message.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I75a2348561833f3f19181b4f30a6971ecb317899
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Since mst_t is a union of the struct containing the lower and higher 32
bits and the raw 64 bit value, the address of the microcode update can
be directly written to the raw value instead of needing to split it into
the lower and higher 32 bits and assigning those separately.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I51c84164e81477040a4b7810552d3d65c0e3656b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73636
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Since mst_t is a union of the struct containing the lower and higher 32
bits and the raw 64 bit value, the address of the bootblock_resume_entry
can be directly written to the raw value instead of needing to split it
into the lower and higher 32 bits and assigning those separately.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I7ebab1784ec592e18c29001b1cf3ee7790615bf8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
fix compilation on musl-libc systems by providing an implementation
for __always_inline
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I01a7eb9ed28e79523623ab362510ec2d93f4a8b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73667
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When cbmem is initialized in romstage and postcar placed in the stage
cache + cbmem where it is run, the assumption is made that these are
all in UC memory such that calling INVD in postcar is OK.
For performance reasons (e.g. postcar decompression) it is desirable
to cache cbmem and the stage cache during romstage.
Another reason is that AGESA sets up MTRR during romstage to cache all
dram, which is currently worked around by using additional MTRR's to
make that UC.
TESTED on asus/p5ql-em, up/squared on both regular and S3 resume
bootpath. Sometimes there are minimal performance improvements
when cbmem is cached (few ms).
Change-Id: I7ff2a57aee620908b71829457ea0f5a0c410ec5b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37196
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change stop_delay_ms time(T3) from 180 to 150 to meet specification.
T3 min-value of HID-I2C should be 150ms.
BUG=b:267280863
TEST=emerge-skyrim coreboot chromeos-bootimage.
Change-Id: I7ef7db4edaecece1fa5ab07e30a80e556ed35f8b
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This separates the SPL fusing function into a separate C file which can
be excluded if it is not needed. This allows the psp_set_spl_fuse()
function to be made static again as the state of the function will
always match the boot_state entry.
Move the required #defines to the common header file so they can be
used by both psp_gen2.c & spl_fuse.c.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ifbc774a370dd35a5c1e82f271816e8a036745ad5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73655
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Even though right now TSEG will always be located below 4GB, better not
make assumptions in the SMM relocation code. Instead of clearing the
higher 32 bits and just assigning the TSEG base and per-core SMM base to
the lower 32 bits of the MSR, assign those two base addresses to the raw
64 bit MSR value to not truncate the base addresses. Since TSEG will
realistically never be larger than 4GB and it needs to be aligned to its
power-of-two size, the TSEG mask still only needs to affect the lower
half of the corresponding MSR value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1004b5e05a7dba83b76b93b3e7152aef7db58f4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Since mst_t is a union of the struct containing the lower and higher 32
bits and the raw 64 bit value, there's no need to convert the lower and
higher 32 bits into a 64 bit value and we can just use the 64 bit raw
value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5923df84f0eb3a28ba6eda4a06c7421f4459e560
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Since mst_t is a union of the struct containing the lower and higher 32
bits and the raw 64 bit value, there's no need to convert the lower and
higher 32 bits into a 64 bit value and we can just use the 64 bit raw
value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibc5d64c74eaabfc4b7834a34410b48f590f78a12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
On IBM/SBP1 with 384 cores it takes a while for all APs
to check in. Use linear scaling instead of hardcoding an
arbitrary limit for the timeout.
Change-Id: If020a3fa985bfc7fd2f0aa836dc04e6647a1a450
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: TangYiwei
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Set DmiMaxLinkSpeed to 4 in FSP to ensure that FSP always supports
PCIe Gen 4 drives.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I0e31919122dacfbdc2486fa8216a28b479f3bd00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Lastbus is a bus debug tool. When the bus hangs, the bus transmission
information before resetting will be recorded.
The watchdog cannot clear it and it will be printed out for bus hanging
analysis.
There are two versions for lastbus:
Version 1 for MT8186, and version 2 for MT8188.
BUG=b:263753374
TEST=build pass.
Change-Id: Ibaf510481d1941376bd8da0168ef17c99a0fb9a2
Signed-off-by: ot_zhenguo.li <ot_zhenguo.li@mediatek.corp-partner.google.com>
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73624
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
For simplicity, OEM devices are given a single codename per build variant. Winterhold was intended to be the lead device and was chosen as the code name for this OEM. Unfortunately, Winterhold was cancelled. We attempted to rename Winterhold to Whiterun to avoid future confusion. Again, unfortunately, since some devices were already built, changing the name requires a manual change to force the firmware to be taken by the DUT. This was not a reasonable path forward, so we're abandoning the naming to Whiterun.
This reverts commit af69de494e.
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Idef95f0f4f369b235937e1806ce57c427e441f21
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73583
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
