3 out of 4 architectures currently zero out the payload BSS in early
assembly code, which is pointless since the code loading the payload has
already done that (with a more efficient memset). ARM64 has never had
any code like this and can run just fine without it. This also defeats
the new optimization of moving the heap out of the BSS, since all three
implementations assume that everything between _edata and _end is BSS.
We should just take this out.
Change-Id: I45cd2dabd94da43ff0f77e990f11c877cee6cda1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16091
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
cbfs_get_handle() allocates memory for a handle and doesn't free it if
it errors out later, leaving the memory permanently leaked. Fix.
Change-Id: Ide198105ce3ad6237672ff152b4490c768909564
Reported-by: Coverity
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16207
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add an option to add bayou as the primary payload.
Change-Id: I8c0164344537b82870198b13ef6fdf20e7d095ef
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15954
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Omar Pakker
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Allocating a 15980-byte scratchpad on the stack when your default stack
size is set to 16KB is really not a great idea. We're regularly
overflowing into the end of our heap when using LZMA in libpayload, and
just happen not to notice it because the heap rarely gets filled up all
the way. Of course, since we always *have* a heap in libpayload, the
much saner solution is to just use it directly to allocate the
scratchpad rather than accidentally grow backwards into it anyway.
Change-Id: Ibe4f02057a32bd156a126302178fa6fcab637d2c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16089
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The ARM64 MMU code maintains a list of used ranges, to avoid mapping the
DMA buffer over the coreboot tables and things like that. Unfortunately,
the overlap with ranges in that list is checked with
(start1 >= start2 && start1 <= end2) || (end1 >= start2 && end1 <= end2)
which is not a full overlap check and misses the case where the second
region is completely contained within the first. This patch replaces
that code with a properly vetted primitive from Stack Overflow.
BRANCH=none
BUG=chrome-os-partner:54416
TEST=Observe how Kevin recovery screen now gets drawn at 10x the speed.
Change-Id: I7e2706426762794e160d743bbfc40da1e26eee12
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16075
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This replaces all occurrences of a hardcoded vboot path to the
VBOOT_SOURCE variable, that may be overridden from the command line,
witch fallback to the source from 3rdparty.
Change-Id: Ia57d498d38719cc71e17060b76b0162c4ab363ed
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15825
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The KCONFIG_CONFIG value was previously keeping the value set by
coreboot's makefile. That caused it to overwrite coreboot's .config,
making the current coreinfo build and the next coreboot build fail
with the curious error that you were building without the correct
toolchain.
Change-Id: I973b0c36e7227135a5c2d6d261e08889857aaaf1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16023
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Omar Pakker
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Move the configuration of the timer, storage and USB drivers from the
main Kconfig to three separate ones stored in the respective
directories.
This reduces the LOC of Kconfig and makes it more manageable.
Change-Id: I0786dbc1d5d8317c8ccb600f5de9ef4a8243d035
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15914
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This removes the newlines from all files found by the new
int-015-final-newlines script.
Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Delete pbuilder since it is not needed anymore.
Change-Id: I685547e9692944b89521864fc3bee4e9a2f1139f
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15955
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Omar Pakker
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Including $(top) in the DOTCONFIG definition allows getting rid of the
$(top) prefix in payloads, which in turns allows providing a full path
for DOTCONFIG via the command line.
Change-Id: I7546a12cf4a2a146e32fef81121f45f83ba67ac8
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15826
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Read timestamps from the last boot sequence and display the information
as if using cbmem -t.
Tested on QEMU with a SeaBIOS payload.
Change-Id: I44f1f6d6e4ef5458aca555c8a7d32cc8aae46502
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15600
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
As reported by Andrew Engelbrecht on the coreboot mailing list, there
was an issue when selecting the pxe rom file:
When using "make menuconfig", if "add pxe rom" is selected, then
the field below to set to the path of the pxe rom, the "add pxe rom"
option gets disabled.
This problem seems to be due to the use of the 'optional' Kconfig
keyword, so this section of the Kconfig is rewitten here to remove that
keyword and fix the issue.
Change-Id: I51680cb746160cb853c8679ac64e2d37989cb574
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15555
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
cbgfx currently makes a separate function call (recomputing some values)
for every single pixel it draws. While we mostly don't care that much
about display speed, this can become an issue if you're trying to paint
the whole screen white on a lowly-clocked Cortex-A53. As a simple
solution for these extreme cases, we can build a fast path into
clear_screen() that just memset()s the whole framebuffer if the color
and pixel format allow it.
BUG=chrome-os-partner:54416
TEST=Screen drawing speed on Kevin visibly improves (from 2.5s to 3ms).
Change-Id: I22f032afbb86b96fa5a0cbbdce8526a905c67b58
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15524
Tested-by: build bot (Jenkins)
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
- Add all, clean and distclean to .PHONY
- Rebuild nvramcui.elf when the makefile changes.
- Update libpayload target to $(LIBPAYLOAD_DIR) target - these are the
same thing, but by using the variable it makes it more obvious.
- Remove .config.old as well as .config when running distclean.
- Add CFLAGS to the LPGCC command line:
-- Enable all warnings, set warnings as errors.
-- Optimize for size
-- Enable '-ffreestanding -nostdinc -nostdlib' to keep from building in
system functions and to fix the warning:
libpayload.h: warning: conflicting types for built-in function 'log2'
static inline int log2(u32 x) { return sizeof(x) * 8 - clz(x) - 1; }
Change-Id: Icc6c70b259cd7c22dc960cdb732927f9c0c93ee8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14482
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Set CONFIG_GRUB2_EXTRA_MODULES from the Kconfig when building GRUB2.
This causes the specified modules to actually enter the built payload.
Change-Id: I345026af705ba8af77c6c12aba8e1bd4135e519c
Signed-off-by: Benjamin Barenblat <bbaren@google.com>
Reviewed-on: https://review.coreboot.org/15203
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
1. Make the xHCI driver to support xHCI controller v1.1
2. And a new function xhci_ring_doorbell(), it aims to
add a memory barrier before ringing the doorbell, to ensure
all TRB changes are written to memory.
BRANCH=none
BUG=chrome-os-partner:52684
TEST=boot from USB on Kevin rk3399 platform
Change-Id: Ife1070d1265476d0f5b88e2acf3299fc84af5832
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 0c21e92
Original-Change-Id: I4e38e04dc3c7d32ee4bb424a473c70956a3c3ea9
Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/346831
Original-Commit-Ready: Brian Norris <briannorris@chromium.org>
Original-Tested-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15111
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Including the SeaBIOS bootorder file seems to be a fairly common desire,
so let's make it easy.
Change-Id: Ib0874dee46215287b09c0b52648072ef3ff06ec5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15076
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Some exceptions (like from calling a NULL function pointer) are easier
to narrow down with a dump of the call stack. Let's take a page out of
ARM32's book and add that feature to ARM64 as well. Also change the
output format to two register columns, to make it easier to fit a whole
exception dump on one screen.
Applying to both coreboot and libpayload and syncing the output format
between both back up.
Change-Id: I19768d13d8fa8adb84f0edda2af12f20508eb2db
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14931
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The libpayload CBFS APIs are pretty old and clunky, primarily because of
the way the cbfs_media struct may or may not be passed in and may be
initialized inside the API calls in a way that cannot be passed back out
again. Due to this, the only real CBFS access function we have always
reads a whole file with all metadata, and everything else has to build
on top of that. This makes certain tasks like reading just a file
attribute very inefficient on non-memory-mapped platforms (because you
always have to map the whole file).
This patch isn't going to fix the world, but will allow a bit more
flexibility by bolting a new API on top which uses a struct cbfs_handle
to represent a found but not yet read file. A cbfs_handle contains a
copy of the cbfs_media needed to read the file, so it can be kept and
passed around to read individual parts of it after the initial lookup.
The existing (non-media) legacy API is retained for backwards
compatibility, as is cbfs_file_get_contents() (which is most likely what
more recent payloads would have used, and also a good convenience
wrapper for the most simple use case), but they are now implemented on
top of the new API.
TEST=Booted Oak, made sure that firmware screens and software sync
worked okay.
Change-Id: I269f3979e77ae691ee9d4e1ab564eff6d45b7cbe
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14810
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Extend the serial port description to include the input clock frequency
and a payload specific value.
Without the input frequency it is impossible for the payload to compute
the baud-rate divisor without making an assumption about the frequency.
This breaks down when the UART is able to support multiple input clock
frequencies.
Add the UART_PCI_ADDR Kconfig value to specify the unique PCI device
being used as the console UART. Specify this value as zero when the
UART is not on the PCI bus. Otherwise specify the device using bus,
device and function along with setting the valid bit.
Currently the only payload to consume these new fields is the EDK-II
CorebootPayloadPkg.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing is successful when CorebootPayloadPkg is able to properly
initialize the serial port without using built-in values.
Change-Id: Id4b4455bbf9583f0d66c315d38c493a81fd852a8
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14609
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Change-Id: Ibf2c91be93e2567cc1262b6fb84461eef51ab3e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b87157138302b017e64a28417a22421c880c1bcb
Original-Change-Id: I16a8324d3c8ef4ee729f4509fda5bfe703b24ce4
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333304
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14656
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If a framebuffer is already configured by coreboot, libpayload's
MMU tables didn't mark its memory DMAable (unlike when libpayload
set up its own framebuffer memory).
BRANCH=none
BUG=chrome-os-partner:52826
TEST=depthcharge's recovery screen is not corrupted anymore on kevin
Change-Id: I228a861b3fdcf1298a3cfa0a054214c78ed55e70
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 889e8358a0f2f504abd9910549aa68f3992bb4e8
Original-Change-Id: I7ba79151ccc1eb605f82e1869a74b539a6be5e99
Original-Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/341092
Reviewed-on: https://review.coreboot.org/14685
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=chrome-os-partner:49249
TEST=Compiles and boots and detect USB storage
BRANCH=none
Change-Id: I9007399e1f785e6f1d2258225e3f7cc602053aed
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1db43f53973d2124e41186777caa829aa346ace3
Original-Change-Id: I943d19a3a7d785bd075073b57ba6388662d7df90
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333311
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14659
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds a nyan libpayload config, that should fit all nyan devices.
Change-Id: I6b86a03054a7625534fd38ee6a21d3b91fb43589
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/14473
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Commit 785a31d67e
(Makefile.inc: Move payload code to payloads/) breaks the usage of
Linux kernel as payload. The reason for it is that cbfs-files-y is
evaluated before payloads/external/Makefile.inc is sourced and as a
consequence ADDITIONAL_PAYLOAD_CONFIG is empty when it is used for
payload options. That leads to missing command line and initrd for
the kernel which in turn leads to kernel panic when it boots.
To avoid it, move the code which adds payload to cbfs completely to
payloads/extranal/Makefile.inc. This way, ADDITIONAL_PAYLOAD_CONFIG is
set right before the payload itself is added to cbfs-files-y.
I have tested this patch with a Linux kernel as well as with SeaBIOS as
payload on mc_tcu3 and it works. If someone sees impact to other
payloads just let me know.
Change-Id: I7aad352f8b3fc1fdba1875b12648b07eba14e282
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14579
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
error: pointer targets of 'strcmp' differ in signedness
expected 'const char *' but argument is of type
'u8 * {aka unsigned char *}'
Change-Id: Id5cbb6fc2efd7c57abc59b08416047e10461436f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14521
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: Id584cbf02c9d3ecb89fcf2a3190f0a73816954a8
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14526
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Memtest86+ was pulling origin/master which will change over time. This
adds a commit-id as a stable version to allow it to be reproducible.
The other secondary payloads, coreinfo and nvramcui, do not need this
because they are part of the coreboot repo and not fetched from an
external source.
Change-Id: I20c516010f76cf03342bd8883d0ee7ac5f8bc7e4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14520
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This series of patches attempts to update all of the external payload
makefiles to be as similar as possible.
- Add .git to the git repo URL to show that it's a git repo.
- Use the common checkout, fetch, and clone ($(project dir)) targets
- Add TAG-y and NAME-y variables - just with origin/master for now.
Stable will be added shortly.
- Make sure all phony targets are in .PHONY
Change-Id: If83c100841d5f91a9fab7ac44ba20ec2271c0594
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14152
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add 'nvramcui' target to make it easier to build and test.
Put both nvramcui & coreinfo targets into .PHONY because they
both exist as directories.
Change-Id: I9cf76785e69f3c8e47fe92f1b1648fd0f7a63c3e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14481
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Move time functions and prototypes from libpayload.h to time.h.
In a similar manner to other c libary headers, this change makes
porting existing applications to libpayload easier.
Change-Id: I71e27c6dddde6e77e0e9b4d7be7cd5298e03a648
Signed-off-by: Stef van Os <stef.van.os@prodrive-technologies.com>
Reviewed-on: https://review.coreboot.org/14437
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When building libpayload, make the build directory and .config outside
libpayload source directory so it'll not pollute the libpayload source
and cause conflicts with other builds.
Change-Id: Idcfbc7dbe4d52a3559229d8450c3efaafd33b93b
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/14389
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
drivers/usb/xhci.c and drivers/usb/ehci.c both require arch/barrier.h.
barrier.h is present for x86, arm, and arm64, but not for mips. This
is generating a build error after enabling USB by default on libpayload.
I believe that this slipped through the buiders due to them not getting
cleaned fully. It was caught in the coverity scan and when setting up
a new build server.
Change-Id: Idd89409a048009c087ce2a787d96a1efd089157f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14391
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
There is a lot of generic code in the 8250 driver that should
be available for non-8250 systems with serial ports as well.
Change-Id: I67fcb12b5fa99ae0047b3cbf1815043d3919437e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14371
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Most people use USB keyboards.
Change-Id: Ia7cf513059565db7b86190c4aae62d7a35392408
Signed-off-by: Marcel Meißner <mm-meissner@gmx.de>
Reviewed-on: https://review.coreboot.org/7540
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
We already have the ability to add a pxe rom to cbfs, but it needs to be
configured and built separately.
This moves the existing Kconfig options for PXE from device/Kconfig and
the top level Makefile.inc to payloads, and adds the option to download
and build iPXE as part of the coreboot build process.
This configures the serial output of iPXE to match coreboot's serial
port configuration by editing the .h files. iPXE doesn't give any
real build-time method of setting these configuration options.
Change-Id: I3d77b2c6845b7f5f644440f6910c3b4533a0d415
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14085
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There are more modules in a category than categories. Moving the clock
down leaves more space for the list of modules.
Change-Id: I536dafe32e1abb1995c8a1942d70e0d90b905612
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14255
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Julius Werner