Following the reasoning in,
dfa8a32 src/mainboard/asrock/e350m1: Properly indent devicetree.cb
Change-Id: I88ca01519c1c47a7eb0d564a55c945589f9d32af
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5629
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The target board has a different base addr. for its hardware
monitor (fans, temp, etc) from the Fintek Super I/O datasheet.
Change-Id: Ifc025cb92d0fc4e8f813091d00a6c87deae05863
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5383
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Fan controls in 0x400-0x4ff are not programmed here. Thus fan
control from amd/persimmon in the devicetree.cb does not apply
to this board.
Change-Id: I9156143476df0a7b44c7af90fa2107e8a8ba851e
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5381
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The miniPCIe ports hanging off 15.0 are infact x1, as are the two
onboard NIC's on 6.0 and 15.0.
Change-Id: I6247838f6b5823369543e338975a4c5c6fd00d7c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5328
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Step 2: change the Persimmon code to adapt it to the new board's hardware.
The NF81-T56N-LF is a IPC form factor embedded board:
- AMD Fusion G-T56N (1.65 GHz dual core) APU
- 2x SO-DIMM sockets for DDR3 800-1066 SDRAM (Fixed at 1.5V)
- VGA and LVDS (via Analogix ANX3110)
- AMD A55E (Hudson-E1) southbridge
- 6x USB 2.0/1.1 ports
- 5x SATA3 6Gb/s, 1x mSATA socket
- 6-Channel HD Audio (via VIA VT1705)
- PCI and ISA (via ITE IT8888)??
- NEC uPD78F0532 microcontroller on I2C ("SEMA")??
- 2x RJ45 GbE (via Realtek RTL8111E x2)
- Fintek F71869AD Super I/O
- PS/2 KB/MS port
- RS232 header (via Unisonic UTC 75232 RS232 driver/receiver)
- GPIO header
- CIR header
- 1x MXIC MX25L1606E (SO8, soldered) 16 Mbit SPI flash (BIOS)
Note: MX25L1606E is 16Mbit, 8bits in a byte, so 2MB. Jetway *lies*
claiming the SPI flash is 16MB. They also use red pen over the chip
so you wont see this deceit.
Change-Id: I03ccc58bc782e800aeef0d19679ce060277b0c04
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/4801
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Step 1: copy all files unmodified from Persimmon. This makes it much
easier later to see how the two boards actually and deliberately differ
when porting bugfixes from one to the other.
Change-Id: I23e223049ed1c69e320e6b31efe4266bfeb97207
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/4800
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Edward O'Callaghan