On zork, bootblock is part of RW firmware in non-recovery mode, so PCIe
GPIOs can be configured early on in bootblock rather than waiting until
romstage. This change moves the call to variant_pcie_gpio_configure() to
happen in bootblock and drops romstage.c file.
BUG=b:154351731
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ic515304f35fe5623d58d6000efcb11fb9039e137
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43476
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
gpio_set_stage_rom table is now configuring only PCIe related GPIOs in
romstage. This change moves the configuration of PCIe related GPIOs to
variant_pcie_gpio_configure() to keep all the configuration for WiFi and
non-WiFi PCIe pads in one place. It also drops the function
variant_romstage_gpio_table() as it is unused.
BUG=b:154351731
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ib1c41ba141dce6b52b6e0a250a3aa07c296068aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43475
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that the power and reset GPIO configuration for non-PCIe devices is
dropped from romstage GPIO table, the tables for pre-v3 and v3 version of
schematics are exactly same. So, this change drops the duplicate table and
also removes the check for v3 schematics when configuring the pads in
romstage.
BUG=b:154351731
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I67ca9f587c3f47912393ebaf38badcc9d76cc393
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change keeps pen power enabled in sleep state to allow it to
charge in S3.
BUG=b:155422911
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I6190496653878327f34a01f6a743db474d32e929
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43452
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit a5ca4a0c75.
Reason for revert: Breaks coreboot tree because of non existent kconfig symbol
Change-Id: Ib8f55dc2f6444690945bc2dc64baad5d0c39cdf4
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Currently the common soc code automatically selects
POWER_STATE_DEFAULT_ON_AFTER_FAILURE which making other mainboard
options unselectable.
However, there're some cases that power state should change to different
states after reapplying power.
Make POWER_STATE_DEFAULT_ON_AFTER_FAILURE default y but do not select it
in soc code so that we can disable it and select other options in the
mainboard code.
Tested on OCP Delta Lake.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: Ifa853d81ee9477d2440ceaa67b2bd6b863ee52c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Implement sending POST start/end command to BMC.
TEST=Read POST command log in OpenBMC,
if command received successfully, message may show as below,
root@bmc-oob:~# cat /var/log/messages |grep -i "POST"
2020 May 28 13:21:22 bmc-oob. user.info fby3-v2020.20.2:
ipmid: POST Start Event for Payload#1
2020 May 28 13:21:25 bmc-oob. user.info fby3-v2020.20.2:
ipmid: POST End Event for Payload#1
root@bmc-oob:~#
Signed-off-by: TimChu <Tim.Chu@quantatw.com>
Change-Id: I38b512ee97c0eda6ba54482a448ef9ffc27b4ddb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41993
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tested on OCP Delta Lake with lspci checking if PCIe speed is changed
are expected.
Change-Id: I189027c403814d68db2b7c5f41fc254a293fe3a1
Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
We typically call checkpatch.pl through make lint which properly adds
the option to tell checkpatch that our lines may be 96 columns long.
However there's one mention of calling checkpatch directly and that
confuses people with complaints about overly long lines that exceed
80 columns.
The lint test that runs checkpatch (and with the right options)
can also be used on a per-directory basis, so offer that instead.
Change-Id: If21e925d2d2394c876724a44b0e23c9b2744c56b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This pin has been removed from recent revisions (or at least moved to a
pin that's not controlled like a normal GPIO). It has also never been
used on older ones (I think?). The same GPIO is now used as a SKU ID
pin, so make sure we're not incorrectly configuring it as an output
(although sku_id() overrides that later anyway, but it's still
incorrect).
BUG=b:160754995
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I6e0d56e230d0bef172d7b78cc48263e9b6f059de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43471
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Philip Chen <philipchen@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This information is redundant since it's already specified in
baseboard/devicetree_trembyle.cb or baseboard/devicetree_dalboz.cb
domain 0 is still required because sconfig uses it as an identity anchor
to match devicetree and overridetree.
BUG=b:157580724
TEST=Boot zork, usb functional
Change-Id: I3c3c1c2410166b99599d7343fae3ee756f4da321
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43437
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that Zork is using upstream coreboot, we need the template files
in the main branch.
BUG=b:157570490
TEST=n/a
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Change-Id: I6cab4ab0b414473e0a759dce81df9872a40d3f26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43419
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Up until now we have no way of adding transparency into our firmware
screens. Add set_blend() and clear_blend() functions to store alpha
value and rgb values to calculate alpha blending in
calculate_colors().
BUG=b:144969091,b:160839199
BRANCH=puff
TEST=dut-control power_state:rec
press ctrl-d
Ensure background is dimmed when dialog pops up
Change-Id: I95468f27836d34ab80392727d726a69c09dc168e
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Check the output of `cbmem -t` for unknown timestamps. If present, ask
the user to rebuild `cbmem`.
Change-Id: Ief7aa1a698f10d9721964ad1bee057fcd9f4aa40
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If the AP actually needs to write to the TPM, then it is important and
the TPM should commit those changes to NVMEM immediately in case there
is an unexpected power loss (e.g. from a USB-C port partner reset upon
cold reboot request).
BRANCH=none
BUG=b:160913048
TEST=Verify that puff will no longer reboot loop when coreboot writes a
new Hmir (Hash mirror) in the TPM
Change-Id: I9597a55891d11bdf040d70f38b4c5a59c7888b8a
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43414
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SataPortsEnableDitoConfig Enable DEVSLP Idle Timeout settings DmVal and
DitoVal. SataPortsDmVal and SataPortsDitoVal helps to determine when to
enter Device Sleep. Device Sleep enables the host bus adapter (HBA) to
assert the DEVSLP signal as soon as there are no commands outstanding
to the device and the port specific Device Sleep idle timer has expired.
Device Sleep Idle Timeout values (PxDEVSLP.DITO and PxDEVSLP.DM) are
port specific timeout values used by the HBA for determining when to
assert the DEVSLP signal. They provides a mechanism for the HBA to apply
a programmable amount of hysteresis so as to prevent the HBA from
asserting the DEVSLP signal too quickly which may result in undesirable
latencies. This patch is created based on Intel Tiger Lake Processor
PCH Datasheet with Document number:575857 and Chapter number:12.
* PxDEVSLP.DM -> SataPortsDmVal: Enable SATA Port DmVal DITO multiplier.
Default is 15.
* PxDEVSLP.DITO -> SataPortsDitoVal: Enable SATA Port DmVal DEVSLP Idle Timeout
(DITO), Default is 625ms.
BUG=b:151163106
BRANCH=None
TEST=Build and boot volteer and TGL RVP.
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Change-Id: I6a824524738a9e0609f54bea9d892b4a42a1d3db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42214
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
0xc50, 0xc52, 0xc6f don't exist on Picasso. The PCI config space
registers define SATA and OHCI which are at the wrong bus locations.
I just remove the whole section since it's not used. We never access the
PCIe Error region, or the PM2 region either.
BUG=b:153001807, b:154756391
TEST=Build Trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I98aee09770f1df9f553c94580c1ee00c06a9cec1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
There is no reason to create a named variable. We can just return the
package.
BUG=b:153001807, b:154756391
TEST=None
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4f8f0362adf5ea5f026d0ba5ac6ac917fa160142
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This PCI ID is required in order for JSL devices to perform SSDT
generation for DPTF.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I42209d15bc4f1654814465ce1412576f7349dddc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43421
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ACPI specification, version 2.0 says:
_BFS is an optional control method.
So, remove them. They have been copy-pasted around quite a bit, and do
not do anything useful. Plus, it's deprecated in later ACPI versions.
Change-Id: I9ef21f231dd6051d410ac3a0fe554908409c2fa7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43443
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Turning the DXIO and DDI descriptor fields in the FSP_S_CONFIG struct
into arrays allows to properly iterate over the fields.
BUG=b:158695393
TEST=Mandolin still boots.
Change-Id: I85debe4d52399e933768b89b665ff10c9f7779f8
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43434
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Forgetting to add the #pragma pack() at the end of the header file can
lead to hard to debug breakage, so get rid of the #pragma pack usage and
add a __packed to the structs that need to be packed which has less
possibly unwanted side effects.
Since commit d44221f9c8 coreboot always
includes commonlib/compiler.h which provides __packed.
TEST=Timeless build results in identical binary.
Change-Id: Icc53168f4fbc3a63a859f686b18e7023d225f8d2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Drop it before it grows moss.
Change-Id: I0b4f5487cca3c864ba531cc6c78a20c2682fc43d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43287
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Morphius cannot support 100Mhz fast SPI causing it to not boot.
Downgrade all zork boards to fast=66mhz and normal=33mhz to be safe.
BUG=b:161233767
TEST=Boot morphius
Change-Id: I7744dd0cb8dede985fbdc28a64385e0bc4048402
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43459
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Eric Peers <epeers@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Intel southbridges do this. Also make `acpi_sci_irq` non-static as it is
needed outside acpi.c with this change.
Change-Id: I2fd2ec5a3029dc1bd1fa65dc3d1af5505f1f1dad
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Intel southbridges do this. Also make `acpi_sci_irq` non-static as it is
needed outside acpi.c with this change.
Change-Id: I702988493e3b29d807a75c70485baaa2ff6d1aa2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Furquan Shaikh