Currently, compression is only allowed at subheader level (e.g. cbfs_stage,
cbfs_payload_segment). This change adds compression field to each file's
header so that any cbfs file can be compressed.
With the necessary additions in coreboot and libpayload, the following sample
code can load a compressed file:
const char *name = "foo.bmp";
struct cbfs_file *file = cbfs_get_file(media, name);
void *dst = malloc(ntohl(file->uncompressed_size));
dst = cbfs_get_file_content(media, name, type, file, dst);
cbfs_stage and cbfs_payload_segment continue to support compression at
subheader level because stages and payloads have to be decompressed to the load
address, which is stored in the subheader. For these, file level compression
should be turned off.
Change-Id: I9a00ec99dfc68ffb2771bb4a3cc5ba6ba8a326f4
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10935
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In the gm45 code, IOMMU is always selected to be enabled. Instead
this patch removes the Kconfig symbol and its dependencies. This leads
to the same effect without the need for the symbol.
The symbol is still used in the K8 code as it's not selected, simply
defaulted to being enabled, and one of the mainboards disables it.
Change-Id: Ibc5939cd1e297d497bf71b1787d852f7cc09a551
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11345
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
This depends on RELOCATABLE_RAMSTAGE, and shouldn't be selected if
its dependency is not activated.
Change-Id: I8e7efc3f87e105715fe3377ed306891f0d209979
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11473
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
In order to make analysis easier provide an option (-T) to
print timestamps in a parseable format:
ID<tab>raw timestamp<tab>time from previous entry<tab>description
BUG=chrome-os-partner:44669
BRANCH=firmware-strago-7287.B
TEST=Built and tested on glados. Used the following script:
cbmem -T | awk 'BEGIN { FS="\t" } { tot += $3 } END { print tot }'
Change-Id: I06dc0487d1462b6a78924130f0ad74b0d787d3f8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11471
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add the timestamp tick frequency within the timestamp table so
the cbmem utility doesn't try to figure it out on its own. Those
paths still exist for x86 systems which don't provide tsc_freq_mhz().
All other non-x86 systems use the monotonic timer which has a 1us
granularity or 1MHz.
One of the main reasons is that Linux is reporting
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq as the true
turbo frequency on turbo enables machines. This change also fixes
the p-state values honored in cpufreq for turbo machines in that
turbo p-pstates were reported as 100MHz greater than nominal.
BUG=chrome-os-partner:44669
BRANCH=firmware-strago-7287.B
TEST=Built and booted on glados. Confirmed table frequency honored.
Change-Id: I763fe2d9a7b01d0ef5556e5abff36032062f5801
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11470
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As pistachio already provides timer_monotonic_get() let the
generic timestamp_get() use that instead of having around
another implementation of timestamp_get().
BUG=chrome-os-partner:44669
BRANCH=None
TEST=None
Change-Id: Iaa6db49f0055b7c2ef116f41453f838093e516e0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11469
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The src/lib/timestamp.c already has an implementation using
timer_monotonic_get() for timestamp_get(). Use that instead
of duplicating the logic.
BUG=chrome-os-partner:44669
BRANCH=None
TEST=None
Change-Id: If17be86143f217445bd64d67ceee4355fa482d39
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11468
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Change-Id: Ieaed5cf76c6f0a6a121e6add731d5c1e1528dfc7
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11375
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Without this change, if one USB3 device is attached when
the board is power up, the USB3 port can not be used.
Change-Id: I98628975000c7d56b1540c2b321d580ace1ef70e
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11377
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: Idf28faa26a7ea5e94495af5ff027309df444766e
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11376
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: Ie3a44c6db9c9c186c52b4743334266ec5411ba8a
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11472
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: I9f59a00e735f39df813b2216290da62eea3c595d
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11372
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This option was removed in the following commit:
* 80f5d5b fsp1_1: remove duplicate mrc caching mechanism
Change-Id: I08ef4fc6029cc066e4f7b9c82b6b187a9794afdb
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11462
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The #error messages only say that "CONFIG_* must be defined", which
conveys no more information that the compiler or assembler failing
when it encounters an undefined CONFIG_* symbol.
Change-Id: I6058474d4cd454cfc20290650425d379f388abd9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11461
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Previously, X4X was incorrectly named because it provides
support for SKUs within XX4X range. This is renamed.
This patch provides support for all X4X SKUs according to
datasheet Intel 4 Series Chipset Family Specification Update,
namely: Q45, Q43, P45, P43, G45, G43, G41 and B43 (both versions).
Tested on Gigabyte GA-G41M-ES2L
Change-Id: I032265e80d9ca51e2fef29201280832ea3210a0b
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/11245
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
After much consideration, and many years of an EXPERT mode sitting
almost completely unused, we've seen that it doesn't work for us.
There is no standard on what constitutes EXPERT, and most of
coreboot's options Kconfig are expert-level.
We even joked that not selecting "EXPERT" should prevent coreboot
from compiling:
@echo $(shell whoami) is not permitted to compile coreboot
Change-Id: Ic22dd54a48190b81d711625efb6b9f3078f41778
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11365
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
This is just wrong. PAYLOAD_SEABIOS tells us nothing about whether
or not the payload will actually be SeaBIOS:
1. PAYLOAD_SEABIOS, but payload changed with cbfstool
2. !PAYLOAD_SEABIOS, but an elf payload was added which is SeaBIOS
et. cetera.
Change-Id: I4c17e8dde20bf21537f542fda2dad7d3a1894862
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11293
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Damien Zammit <damien@zamaudio.com>
mainboard_ec_init() wasn't getting run due to an invalid
Kconfig symbol. This check isn't required as the Kconfig
option for the EC is forced to be enabled, and the function
should always be run.
BRANCH=none
BUG=none
TEST=Rebuilt glados mainboard.
Change-Id: I2c4a33d80533a19b02b83b3aaa6a3386e927f1c7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: edd8c7a0666208b35ee81f57ec2626390958dfb7
Original-Change-Id: I2a92fd28347455c09ecf2119788ca9b6a97a11de
Original-Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295143
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11435
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch adds the ASL files with the DPTF related settings and the
thermal devices enabled in the SOC. It also enables the DPTF setting
at the global NVS level.
BRANCH=None
BUG=chrome-os-partner:40855
TEST=Built for kunimitsu board. Tested to see that the thermal devices
and the participants are enumerated and can be seen in the
/sys/bus/platform/devices. Also checked the temperature readings of the
cooling devices and the thermal zones enumerated in the /sys/class/thermal.
Change-Id: I8ad044eaf1ad488fb1682097da83b40d2bede414
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 7624eeca19b4f286b30c3d4ac5b44c5e9619c2c7
Original-Change-Id: I0d92ef42cff5567ea6fc566730588802d8549ce0
Original-Signed-off-by: Shilpa Sreeramalu <shilpa.sreeramalu@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293391
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Reviewed-on: http://review.coreboot.org/11430
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch includes the DPTF specific ASL files in the main
DSDT definition and enables the CPU thermal participant device
in the device tree. It also enables the DPTF flag in the global
NVS table.It also adds the ASL settings specfic to the mainboard.
BRANCH=None
BUG=chrome-os-partner:40855
TEST=Built for kunimitsu board. Tested to see that the thermal devices
and the participants are enumerated and can be seen in the
/sys/bus/platform/devices. Also checked the temperature readings of the
cooling devices and the thermal zones enumerated in the /sys/class/thermal.
Change-Id: I5fb28e4480648eab39cc9b13ed55eae1d3db4d42
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 54f7f33a12eb5744d6108e362fa1d078fe838b3c
Original-Change-Id: I82527989919bd4f3c49fb58dfc9463f1c1bd3353
Original-Signed-off-by: Shilpa Sreeramalu <shilpa.sreeramalu@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284821
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294650
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Reviewed-on: http://review.coreboot.org/11429
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Use the macro for GPP_E22_IRQ instead of the ACPI code so it
can be removed.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-sklrvp coreboot
Change-Id: I09bea748fea34072d4f8ad7470d37e423b7f63de
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 89069f5f318329182390cad679511547b7d2a6d5
Original-Change-Id: Iad181b4ce1c557ce8d17645431d8ba6f558bb837
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295171
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11427
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Early(romstage) SPI write protected status read(wpsr) functionality
was broken causing 2 sec timeout issue.Implementing HW Seq based rd
status operation in romstage.
BRANCH=NONE
BUG=chrome-os-partner:42115
TEST=Built for sklrvp and kunimitsu and tested using below command
flashrom -p host --wp-enable [this should enable WP on flash chip]
Read using romstage SPI.c. WPSR=0x80 (CB is reading Bit 7 as locked)
flashrom -p host --wp-disable [this should disable WP on flash chip]
Read using romstage SPI.c. WPSR=0x00 (CB is reading Bit 7 as unlocked)
Change-Id: I79f6767d88f766be1b47adaf7c6e2fa368750d5a
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 4b798c44634581ebf7cdeea76c486e95e1f0a488
Original-Change-Id: I7e9b02e313b84765ddfef06724e9921550c4e677
Original-Signed-off-by: Subrata <subrata.banik@intel.com>
Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/294445
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11423
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This is needed to fix error in depthcharge:
src/vboot/util/flag.c:38 flag_fetch(): Don't have a gpio set up
for flag 3.
BUG=chrome-os-partner:44214
TEST=Verify depthcharge prints EC ID on boot up
BRANCH=None
Change-Id: Ia2d88b8427e54e2dc9e6c9abecc95fd7656abb66
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 142b156c72ceedfbd4bf3f54c0cb1128c0fad5a3
Original-Change-Id: I7e7a7d1b92bc1ee2c5ebac8de6946550ddd68a68
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/294715
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11421
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Move the gpio pad configuration prior to SiliconInit()
in case there are dependencies of the pads being configured
in prior to SiliconInit().
BUG=chrome-os-partner:43522
BUG=chrome-os-partner:43492
BRANCH=None
TEST=Built and booted glados.
Change-Id: I84f8e965bf205a4945b14a63fa8074953750f785
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 5cce5347449f69ac6cf7030ea3b91d3f8b4cc7f9
Original-Change-Id: I18cd33a455d5635a866abb76142cab516b04f446
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294642
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11420
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On proto2 boards the kepler device has its reset line pulled up
to one of its IO rails with a zener in between. This results in the
device not being visible at MemoryInit() time because for some
reason FSP is doing PCIE configuration/probing in that path. Hack
around the broken FSP logic by configuring the pads for kepler's
power and clkreq.
BUG=chrome-os-partner:44326
BRANCH=None
TEST=Built and booted glados. lscpi shows the device on bus 2.
Change-Id: I543eb3ccd3ab5ffacd6efc959e6e2f7a88de78b3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 67f6b57487e8724b469f74870e0083d4e1dac4d2
Original-Change-Id: I7fe4a707f9321b7bdec4b4be729c5d0dcce65f6e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294810
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11419
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Export the proper GPIO for EC_IN_RW so it can be picked up and
used by depthcharge/vboot.
BUG=chrome-os-partner:43072
BRANCH=none
TEST=build and boot on glados P2
Change-Id: I32d338ef424086ec9701900e976bd0dffe4637a0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: dd983c84de0c3b896b20d38438a3285cfcaf7e56
Original-Change-Id: I77f7d3a0c0d733302b81273d96026d39b001ed19
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294712
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11418
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The RMT flag that was attempting to disable saved training to
force a full memory train was happening too late. In testing
I was actually hitting a case where FSP was training every time
but it was not because it was properly being told to.
This moves the check of the RMT flag from devicetree to happen
ealier, before it is actually consumed by romstage_common().
BUG=chrome-os-partner:40635
BRANCH=none
TEST=do both power off+on and warm resets to ensure that FSP
is doing a full memory train every time with RMT enabled.
Change-Id: Icf36e7b1ae20e08f6bc24bf832498d69b37dee92
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: f3fa3846d51dec65f22f018acc8fb8c4d18688a7
Original-Change-Id: I2128b4a24bb8b2c8ddcb792c09b6fb0284d1fda4
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294177
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11417
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The previously driven TX state of the buffer was not
being cleared before or'ing in the new value. Fix this
oversight.
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built and booted glados. Also dumped assembly and saw the
masking happen.
Change-Id: I74ea469564d37d6b29e9481b0ea704f04f54ac30
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: d399e8b32b30b8b2275bb6ff8dd24f7d5cfeadda
Original-Change-Id: I341b396af5de20ffeeb2e42066b224dd54251793
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294541
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11416
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
RMT is useless if the memory does not do a full training pass,
and since FSP does not seem to handle that case itself have
coreboot not pass in a valid set of saved training data so FSP
will do a full memory train.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot twice on glados with p2 and RMT enabled
and see it do a full memory train on each boot.
Change-Id: Ia4f29a937e726a5a676f056ce8970086988da5b6
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: f01e99204409899d4adbaebbe221b0348975cfa6
Original-Change-Id: I0bb193c5f3c9206a67315906745aad96a95b3f74
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294067
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11414
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The SOC handler for memory init params is only taking UPD
as an input which does not allow it to use romstage_params.
In addition the UPD input is called params which is confusing
so rename it to upd so romstage_params can be passed properly.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados p2
Change-Id: I414610fee2b5d03a8e2cebfa548ea8bf49932a48
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: db94d6f3e6cad721de2188a136df10ccf66aff6a
Original-Change-Id: I7ec15edd4a16df121c5967aadd8b2651267ec773
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294066
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11413
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The BUNIT controls the policy for read/write access to physical
memory. For the SMRAM range the policy was not allowing dirty
evictions to the SMRAM when the core causing the eviction was not
in SMM mode. This could happen when the SMM handler dirtied a line
and then RSM'd back into non-SMM mode. The cache line was dirtied
while in SMM mode, but when that particular cache line was evicted
it would be silently dropped. Fix this by allowing the BUNIT to honor
writes to the SMRAM range while the evicting core is not in SMM mode.
The core SMRR msr provides the mechanism for disallowing general access
to the SMRAM region while it is not in SMM mode.
BUG=chrome-os-partner:43091
BRANCH=None
TEST=Run suspend_stress_test and ensure there is no hang SMI handler
on suspend-path.
Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Change-Id: Ie794aa3afd54b5e21d0d59a2a7388d507f233537
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 9c481ab339b4e5ab063e2c32b1f0a48b521142b2
Original-Change-Id: I3e7d41c794c6168eb2ad4eb047675bdb1728f72f
Original-Reviewed-on: https://chromium-review.googlesource.com/292890
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: http://review.coreboot.org/11412
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
CBFS_SIZE is living as a mainboard attribute. Because
of the Kconfig include ordering the SoC *cannot* set
the default.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=None
Change-Id: If34e8fd965573fdc7f57b63201dbcb5256e132d6
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: a820b11a0aa3b820c79b1f76b15370d969153175
Original-Change-Id: I7ba637e66878f5ae9caedb63fdd37ed7e375224e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289832
Original-Reviewed-by: Martin Roth <martinroth@google.com>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11410
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
We don't need the code in romstage, and it saves us a few #ifdefs.
Change-Id: I26d867566f07c7d80890cd01bf055be7497130d3
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11457
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It doesn't make sense to die() when printing information. In fact the
die() are protected by DISPLAY_HOBS config option. This can get
confusing, so replace die() calls with printk().
Also since these messages are designed to be informational, keep them
at BIOS_INFO log level.
Change-Id: Id75b9a54f4aea23074a7489d12809cc2da05f1cd
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11456
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Daisuke Nojiri