If the timestamp entries are added out of order, the duration
calculation will be wrong.
AGESA collects timestamp data through all the stages. Then in AmdInitPost
it asks for a buffer to write TP_Perf_STRUCT into. agesawrapper will then
take the data and call timestamp_add on each entry. This results in
the entries being out of order.
TEST=Built firmware for grunt that manually added entries and then ran
cbmem -t/-T to verify the entries were in the correct order.
Change-Id: I6946a844b71d714141b3372e4c43807cfe3528ad
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/26168
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The VIA CPUs allow setting the CPUID vendor, which is best read as
a character string.
Change-Id: I67f77ca75f7d77e47b3ba09bad904df5805e373a
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/18257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
VIA c3 & C7 use the the family of 0x6 and model 10, but are not quite
Pentium III.
Change-Id: I85e9853b42cfd20db46db0bd244620d6813bc826
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/18256
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit adds support for describing USB ports in devicetree.cb.
It allows a USB port location to be described in the tree with
configuration information, and ACPI code to be generated that
provides this information to the OS.
A new scan_usb_bus() is added that will scan bridges for devices so
a tree of ports and hubs can be created.
The device address is computed with a 'port type' and a 'port id'
which is flexible for SOC to handle depending on their specific USB
setup and allows USB2 and USB3 ports to be described separately.
For example a board may have devices on two ports, one with a USB2
device and one with a USB3 device, both of which are connected to an
xHCI controller with a root hub:
xHCI
|
RootHub
| |
USB2[0] USB3[2]
device pci 14.0 on
chip drivers/usb/acpi
register "name" = ""Root Hub""
device usb 0.0 on
chip drivers/usb/acpi
register "name" = ""USB 2.0 Port 0""
device usb 2.0 on end
end
chip drivers/usb/acpi
register "name" = ""USB 3.0 Port 2""
device usb 3.2 on end
end
end
end
end
Change-Id: I64e6eba503cdab49be393465b535e139a8c90ef4
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/26169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Make sure that SiFive-related code is counted under RISC-V in the
release notes.
Change-Id: I3a74bb25ea66c98bc194adafd8267afeb42d7993
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25987
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In preparation of having FIT payloads, which aren't converted to simple ELF,
rename the CBFS type payload to actually show the format the payload is
encoded in.
Another type CBFS_TYPE_FIT will be added to have two different payload
formats. For now this is only a cosmetic change.
Change-Id: I39ee590d063b3e90f6153fe655aa50e58d45e8b0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
ifdtool has relied on one of the fields within FCBA(read_freq) to
determine whether a platform supports IFD_VERSION_1 or
IFD_VERSION_2. However, newer platforms like GLK and CNL do not have
read_freq field in FCBA and so the value of these bits cannot be used
as an indicator to distinguish IFD versions. In the long run, we need
to re-write ifdtool to have a better mapping of SoC to IFD fields. But
until that is done, this change adds a list of platforms that we know
do not support read_freq field but still use IFD_VERSION_2. This
change also updates GLK and CNL to pass in platform parameter to
ifdtool.
BUG=b:79109029, b:69270831
Change-Id: I36c49f4dcb480ad53b0538ad12292fb94b0e3934
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/26023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
I get the error below when using the following command in combination
with sudo:
sudo command -v $SOME_COMMAND
sudo: command: command not found
Detection of the cbmem path is working fine without sudo.
Change-Id: I8788c190ffebde117e2abd3df924c48d8f6fd05d
Signed-off-by: Matthias Gazzari <mail@qtux.eu>
Reviewed-on: https://review.coreboot.org/25989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The layout command prints all FMAP regions in the final image among with
the region size. Extend this command to show the offset of each region
in the image.
Change-Id: I5f945ba046bd2f1cb50a93e90eb887f60c6fde8a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/25851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Correct spelling mistakes and punctuation, and improve some wording.
Change-Id: I2c976bd62d8fa508373747b3fb3cf31490d5f631
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/25338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reduce the potential for confusion.
Change-Id: I1d5df9acb30948f786f4ced895bbaeed80153fdb
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
That caused the CFLAGS, CXXFLAGS, and '|| touch .failed' to not be taken
into account when building binutils.
Change-Id: I94521eb73cefdc5ed01fbf10122966a54cc28166
Signed-off-by: Vivia Nikolaidou <vivia.nikolaidou@puri.sm>
Reviewed-on: https://review.coreboot.org/25901
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It's what we use on coreboot.org to update
www.coreboot.org/Documentation
Change-Id: I6e5457d2e39a10f14fabd68bbb231a05e2f66f1d
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/25869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
T32 scripts that allow debug of any coreboot stage on sdm845
Change-Id: Ia1bcbe687ca7bba10dc04cb6689640b13a8453f5
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/25542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
In order to help the reader understand where things are generated
from add a comment string that is composed of the command line
used to generate the files.
BUG=b:72728953
Change-Id: I1b93923f8b08192448ab19226fd27661cc09e853
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
We shouldn't have two of everything
Change-Id: I9879b40e26ba5a98626bc14c3d273fb525c070f7
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/25870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
The FU540 is the first RISC-V SoC with the necessary resources to run
Linux (an external memory interface, MMU, etc).
More information is available on SiFive's website:
https://www.sifive.com/products/hifive-unleashed/
Change-Id: Ic2a3c7b1dfa56b67cc0571969cc9cf67a770ae43
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
There's no good reason to use the more complicated name.
Change-Id: I515e2df3b87580ddd31d18fe63451a98e92ead61
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25700
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If one wants to check in generated page tables in C then coreboot
complains about there not being a license. Therefore, add the BSD
license to the generated page tables.
BUG=b:72728953
Change-Id: I980d7a7c0c14c1ed5aa8ce37a1484943a6a100f2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
The linux kernel uses the following mapping for PAT entries:
PTE encoding:
PAT
|PCD
||PWT PAT
||| slot
000 0 WB : _PAGE_CACHE_MODE_WB
001 1 WC : _PAGE_CACHE_MODE_WC
010 2 UC-: _PAGE_CACHE_MODE_UC_MINUS
011 3 UC : _PAGE_CACHE_MODE_UC
100 4 WB : Reserved
101 5 WP : _PAGE_CACHE_MODE_WP
110 6 UC-: Reserved
111 7 WT : _PAGE_CACHE_MODE_WT
Update the page table generator to match what the linux kernel is
using. This just makes things consistent with linux.
BUG=b:72728953
Change-Id: Ie5ddab5c86d4e03688d7e808fcae34ce954b64f9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
There are boards that don't use ports 0x62 and 0x66 for EC, e.g. Dell
Latitude E6230 uses 0x930 and 0x934.
Change-Id: Ie3005f5cd6e37206ef187267b0542efdeb26b3af
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/23430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add more verbose error message for common problems on modern
operating systems, like Secure Boot and CONFIG_STRICT_DEVMEM.
Change-Id: Ie3361910d48271bcc2cd3b4b74937fbc5df0a176
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Only try to unhide MEI if the PCI device wasn't found and
probe for RCBA before trying to use it.
Allows to run the utility on Skylake and newer hardware that
do not have RCBA any more.
TODO: Use sideband interface to unhide MEI.
Change-Id: I7926aa80b132d5be9fece0724516701d74dd4d3d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Don't crash if mapping MEI PCI memory fails.
This can happen if CONFIG_STRICT_DEVMEM is enabled.
Change-Id: I33c75a7cccb4cefaa26f70aed4bdc4bd620cdad0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Copy script from Linux added in commit 7683e9e5 (Properly alphabetize
MAINTAINERS file) by Linus Torvalds.
> This adds a perl script to actually parse the MAINTAINERS file, clean
> up some whitespace in it, warn about errors in it, and then properly
> sort the end result.
>
> My perl-fu is atrocious, so the script has basically been created by
> randomly putting various characters in a pile, mixing them around, and
> then looking it the end result does anything interesting when used as
> a perl script.
Change-Id: I2eb4e3f9863d0fe242fb690f1121842c80d72d6a
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/20742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
util/lint/lint creates a file using mktemp.
mktemp on OpenBSD requires at least 6 X's, while only 5 are in the template.
Change-Id: I0b80214dd83d21e12e16a5002c68127a7ca2e41b
Signed-off-by: Piotr Kubaj <pkubaj@anongoth.pl>
Reviewed-on: https://review.coreboot.org/19745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
OpenBSD needs the same includes as NetBSD. It also doesn't have x86_64_iopl
function, but amd64_iopl.
Change-Id: I28273d4d87a3a77cf35412a0695325c0535e42e5
Signed-off-by: Piotr Kubaj <pkubaj@anongoth.pl>
Reviewed-on: https://review.coreboot.org/19741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
As seen on ASUS P8Z77-V Pro
Change-Id: I9fce9a35174b5120f67c2345a0807db1b843eb48
Signed-off-by: Dan Elkouby <streetwalkermc@gmail.com>
Reviewed-on: https://review.coreboot.org/25661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The list of supported architectures in the usage output of cbfstool is
currently hardcoded and outdated.
Use the arch_names array in common.c to provide and up-to-date list.
Change-Id: I3e7ed67c3bfd928b304c314fcc8e1bea35561662
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Currently, "cbfstool -h | less" doesn't show any file types under
"TYPEs:". That's because the file types are printed with
print_supported_filetypes, which uses LOG, which prints to stderr. Use
printf print_supported_filetypes, and thus print to stdout, to make the
usage output more normal.
Change-Id: I800c9205c59383b63a640bc0798a1bd9117b0f99
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
coreboot doesn't support any Xivo boards, and their tree has been only
available as a tarball for a while. Let's remove this link from the
Supported Motherboards page's preamble.
It's still listed on https://www.coreboot.org/Supported_Motherboards/old.
Change-Id: I50e7bec02e803b62563f21384d857f1b37904dd1
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
corebootv4 vs. just coreboot has lost its significance. Version 4.0 has
been released in February 2010.
Change-Id: Ic2a35739e53fea411efc8691f1ba7db85ba0c764
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
checkpatch_json.py processes the output of checkpatch.pl &
generates json format output of comments.
This json format output can be used to post comment on particular
CL using gerrit.
BUG=None
BRANCH=None
TEST= Run following commands:
1. Capture output of checkpatch.pl to file say checkpatch.txt
nice -n 20 git diff HEAD~ | util/lint/checkpatch.pl --no-signoff -q - |
tee checkpatch.txt
2. Generate json format file for the output.
util/lint/checkpatch_json.py checkpatch.txt comment.json
3. Post the comment.json using gerrit
ssh coreboot.org gerrit review -j "<CL number>,<patchset number>" < comment.json
Change-Id: I2471792796ab8e7d9855a6559fc731345ebd1525
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/23429
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add dtc to Dockerimage for Jenkins.
Change-Id: Ifa3608f0a83431e75fbd402385863cce06e249fb
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25525
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Changelog:
* Add support for the HAP/AltMeDisable bit
* Add support for selective partition removal
* Fix the ME permission removal on gen. 3
* Add public key match
* Print the compressed size of the Huffman modules on gen. 2
* Wipe the ME6 Ignition firmware images
* Fix the removal of the last partition on ME6
* Various region size fixes
* Add manpage
* Add setup.py
* Print the value of the HAP/AltMeDisable bit
The output image should be identical, except for the platforms affected
by bugs (ME 6.x, but it's not supported by coreboot and ME 11.x with the
-d option, but it's not being used in our build process).
Overall, nothing should change when it's used with the
CONFIG_USE_ME_CLEANER option.
Tested on a Lenovo X220 and Sapphire Pure Platinum H61.
Change-Id: I3d5e0d9af0a36cc7476a964cf753914c2f3df9d2
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/25506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
This allows compiling the program using musl-libc, since otherwise
iopl(2) is undeclared.
Change-Id: Ia27203cf47b9be3f7bf1ad422c8f490caeae8f56
Signed-off-by: Ivan J. <parazyd@dyne.org>
Reviewed-on: https://review.coreboot.org/23834
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The default values used by ifdtool for setting region access control
do not match the expected values for SKL/KBL as per the SPI
programming guide. This change adds platform "sklkbl" that sets region
access control bits differently for SKL/KBL images.
BUG=b:76098647
BRANCH=poppy
TEST=Verified that the access control bits on KBL images is set
correctly.
Change-Id: I1328d8006c25be282b3223268d8f1fd0a64e2ed3
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Certain platforms need paging enabled during cache-as-ram because
dirty lines are being evicted by a heavy speculative frontend. Paging
needs to be enabled in order to utilize the NX (no execute) bit for
the regions that are strictly data (such as the stack). This utility
creates 32-bit PAE page tables using a static address space, and
the resulting tables have entries for all the PDPTEs such that it makes
it easy to enable 2MiB naturally aligned DRAM mappings once memory is
trained. Either binary files can be generated or C files. The pages that
are linked use a default base address of 0xaa000000 that can be changed at
runtime to reflect where the page tables are actually loaded. Or
specify a physical address on the command line that is known a priori.
iomap.txt:
0xd0000000, 0x100000000, UC, NX # All of MMIO
0xff000000, 0x100000000, WP, # memory-mapped SPI
0xffff8000, 0x100000000, WP, # XIP bootblock
0xfef00000, 0xfefc0000, WB, NX # CAR
0xfef40000, 0xfefc0000, WB, # verstage
0xfef20000, 0xfefc0000, WB, # romstage
0xfef40000, 0xfefc0000, WB, # fsp-m
$ go run util/x86/x86_page_tables.go --iomap_file=iomap.txt
Merged address space:
00000000d0000000 -- 00000000fef00000 UC NX : 375 big 256 small
00000000fef00000 -- 00000000fef20000 WB NX : 0 big 32 small
00000000fef20000 -- 00000000fefc0000 WB : 0 big 160 small
00000000fefc0000 -- 00000000ff000000 UC NX : 0 big 64 small
00000000ff000000 -- 0000000100000000 WP : 8 big 0 small
Total Pages of page tables: 5
Pages linked using base address of 0xaa000000.
BUG=b:72728953
Change-Id: I47625a24979b196011e2293712a8cdbdbb880d79
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/24919
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Funtion fstat will return -1 if there's any error, 0 if successful.
Check that fstat return is equal to 0, print error message and exit if
not 0.
This fixes CIDs 1353018 and 1353020
BUG=b:72062481
TEST=Build no errors
Change-Id: I83284d9125c75a29471f213f88b9181d5edba2e6
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/23827
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Busybox mktemp does not support patterns with any characters after the XXXXXX
part. Drop the .o extension to make make-spike-elf.sh work on Alpine Linux.
Change-Id: I2e37ceef115c6d4d31eb617558481b2284dada83
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/23174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Kyösti Mälkki