CONFIG_ARCH is a property of the cpu or soc rather than a property of the
board. Hence, move ARCH_* from every single board to respective cpu or soc
Kconfigs. Also update abuild to ignore ARCH_ from mainboards.
Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5570
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Correct selection of UART depends of board layout, not the CPU
internals, so default setting should originate from mainboard.
Change-Id: Ibf0ab0847ccce73c22704e86983dbe3d24ebc8a0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5618
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Rename coreboot_ram stage to ramstage. This is done in order to provide
consistency with other stage names (bootblock, romstage) and to allow any
Makefile rule generalization, required for patches to be submitted later.
Change-Id: Ib66e43b7e17b9c48b2d099670ba7e7d857673386
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5567
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This step needs to be done before calling any MMC functionality.
Change-Id: I88763072c8a541ddba794e79fb55e82eb2f187a9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4745
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Do not pull in console hw-specific prototypes everywhere
with console.h as those are not needed for higher levels.
Move prototypes for UARTs next to other consoles.
Change-Id: Icbc9cd3e5bdfdab85d7dccd7c3827bba35248fb8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5232
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This completes the romstage for the cubieboard.
Change-Id: If3272d8a9e414f782892bc41b34b5e2dece5d7e1
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4686
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Even though the Allwinner A10 is limited to a 24KiB bootblock, the
memory initialization takes only about 3KiB and leaves enough room for
an MMC or NAND driver, so init the memory early on. The advantage is
that we can eliminate complicated logistics of where to cache CBFS and
where to load the ramstage in SRAM.
Change-Id: Id549552ed509434e831db60deaef28e04d62417f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4630
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The CPU was clocked at 384MHz in the bootblock, but the AHB bus has a
maximum rated frequency of 250MHz. Its clock needs to be divided to
keep it within spec. Overclocking the AHB bus hung the CPU when
memory was accessed.
Change-Id: I7cb9cdd1f126b3d5b0446fc68af79b54946bc2d3
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4629
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Rather than having to track which bit in which register should be
cleared or set to gate or ungate the clock to a certain peripheral,
provide a simplified enum which encodes the register and bit. This
change comes with a function which decodes the enum and gates/ungates
the clock.
This also removes the register-dependent bitmasks for APB0 and APB1
gating registers.
Change-Id: Ib3ca16e54eb37eadc3ceb88f4ccc497829ac34bc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4571
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Include a function to multiplex more than one pin at a time. This
is useful for peripherals that have the same function number for
all their pins.
Since we now have two functions for muxing pins, also document
them.
Change-Id: I53997cc3a2586e3cf749cd672f69fb427659c67f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4565
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a minimal infrastructure which initializes the system clocks
and serial console.
Change-Id: I768ede6ccf8674ffe9fecd8925cec89768209cab
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4553
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
