1. Enable and setup USB drivers.
2. Pull up to a weak resistor for USB3_HUB_RST_L and we reset
the hub via GPIO149.
TEST=boot kernel from USB ok
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ifcc11d51b0c1e495477957111e6021ef8275f629
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
1. Turn off L2C SRAM and reconfigure as L2 cache
Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready.
After DRAM is ready, we should invoke disable_l2c_sram to reconfigure
the L2C SRAM as L2 cache.
2. Configure DMA buffer in DRAM
Set DRAM DMA to be non-cacheable to load blob correctly.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: If56d29cdd7d9dfaed05e129754aa1f887a581482
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Move mtk_soc_disable_l2c_sram and mtk_soc_after_dram to common folder
which are the same between MT8192, MT8195 and MT8186.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I8f49214b932a8d28ed2ca0d764dc745fa8ad330d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Change help text to "dual IO read mode" to reduce noun confusion.
Suggestion from this comment:
https://review.coreboot.org/c/coreboot/+/58837/comment/40a98af1_dce6bb2b/
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I54b81cdeba3b693451f66e003fb470c9f8c19ad9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59244
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
CONFIG(SMP) was an invalid condition to use in cases where one
stage requires spinlocks and another one does not. The
stage not requiring spinlock still required <smp/spinlock.h>
to be implemented with no-op stubs.
This reverts commit 037ee4b556
soc/amd/picasso: Add dummy spinlock for psp_verstage
Change-Id: Iba52febdeee78294f916775ee9ce8a82d6203570
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add separate gpio table for early eSPI bus init. Remove espi GPIO from
early_gpio_table. This allows for initializing eSPI separately from
other GPIOs. Simplify verstage_mainboard_early_init.
BUG=b:200578885
BRANCH=None
TEST=Build and boot guybrush
Change-Id: I0cd439f207df7c27575ae363b207293d40485bf8
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
This change adds about 30 KiB to FSP-M. When not using the SPI DMA
controller, this change actually has a ~7 ms boot time penalty. When
we use the DMA engine, we end up with about a 5 ms decrease. Once we
switch to 100 MHz SPI this will help even more since we have effectively
eliminated the decompression time.
BUG=b:179699789
TEST=Boot nipperkin to OS and take boot time measurements
fspm.bin 0x2efc0 fsp 90953 LZMA (233472 decompressed)
fspm.bin 0x2cfc0 fsp 121156 LZ4 (233472 decompressed)
- FSP-M / no async -
| 508 - finished loading body | 177.019 | 179.384 Δ( 2.36, 0.16%) |
...
| 970 - loading FSP-M | 0.346 | 0.346 Δ( 0.00, 0.00%) |
| 17 - starting LZ4 decompress (ignore for x86) | 0.009 | 0.01 Δ( 0.00, 0.00%) |
| 18 - finished LZ4 decompress (ignore for x86) | 53.916 | 59.475 Δ( 5.56, 0.37%) |
- FSP-M / async -
| 508 - finished loading body | 177.185 | 179.689 Δ( 2.50, 0.18%) |
...
| 970 - loading FSP-M | 0.989 | 0.99 Δ( 0.00, 0.00%) |
| 17 - starting LZ4 decompress (ignore for x86) | 9.483 | 12.877 Δ( 3.39, 0.24%) |
| 18 - finished LZ4 decompress (ignore for x86) | 10.833 | 0.312 Δ(-10.52, -0.75%) |
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7d0363d27d98d4ed3afc6f802a13ff7986391921
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Calling reboot_into_recovery with NULL context fails. Initializing ctx
early also fails because the cmos is not ready until after
verstage_soc_early_init. So just reboot and hope for the best.
BUG=None
TEST=Boot guybrush, suspend/resume guybrush
BRANCH=None
Change-Id: I7267a14ab048781b8998d3a6f4220de10e7df250
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The 64-bit compiler x86_64-linux-gnu-gcc-10 aborts the build with the format
warning below:
CC romstage/soc/intel/xeon_sp/memmap.o
src/soc/intel/xeon_sp/memmap.c: In function 'fill_postcar_frame':
src/soc/intel/xeon_sp/memmap.c:39:62: error: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
39 | printk(BIOS_DEBUG, "cbmem base_ptr: 0x%lx, size: 0x%lx\n", cbmem_base, cbmem_size);
| ~~^ ~~~~~~~~~~
| | |
| long unsigned int size_t {aka unsigned int}
| %x
As `cbmem_size` is of type `size_t` use the appropriate length modifier
`z`.
Change-Id: I1ca77de1ce33ce1e97d7c8895c6e75424f0769f5
Found-by: gcc (Debian 11.2.0-10) 11.2.0
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Lance Zhao
List of changes:
1. Add PEG60/10/62 IDs (0x464d/0x460d/0x463d) into device/pci_ids.h
2. Add these new IDs into pcie_device_ids[] in pcie.c
BUG=b:205668996
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com>
Change-Id: Idc8a09b0579e1e6053ed2e35b7556a180a5f0088
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Add APU device apc driver and set up permissions.
APU has its own device apc for control access by domains.
For Domain 0, the access to the following slaves are restricted to
security read and write:
apusys_ao-2, apusys_ao-4, apusys_ao-5, apu_sctrl_reviser,
apu_iommu0_r1 apu_iommu0_r2, apu_iommu0_r3, apu_iommu0_r4
apu_iommu1_r1, apu_iommu1_r2, apu_iommu1_r3,apu_iommu1_r4
For VPU, D0/D5 are set as no protection, other domains are forbidden.
For other slaves, the D0 is no protection, other domains are forbidden.
BUG=b:203145462
BRANCH=cherry
TEST=boot cherry, check dump log and test permissions
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
Change-Id: If92d3b02ac4966332315b85d68e0f48c6a9fce85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
FSP-S is normally memmapped and then decompressed. There are about 7 ms
between starting ramstage, and loading FSP-S. By preloading we can
ensure the fsps.bin is already in RAM by the time we need it. This
reduces boot time by about 7 ms.
BUG=b:
TEST=Boot nipperkin and see ~7ms reduction in boot time
| 10 - start of ramstage | 0.044 | 0.044 Δ( 0.00, 0.00%) |
| 30 - device enumeration | 1.899 | 2.073 Δ( 0.17, 0.01%) |
| 971 - loading FSP-S | 6.645 | 6.628 Δ( -0.02, -0.00%) |
| 15 - starting LZMA decompress (ignore for x86) | 0.016 | 0.01 Δ( -0.01, -0.00%) |
| 16 - finished LZMA decompress (ignore for x86) | 15.266 | 8.316 Δ( -6.95, -0.47%) |
| 954 - calling FspSiliconInit | 0.08 | 0.09 Δ( 0.01, 0.00%) |
CBFS DEBUG: _cbfs_alloc(name='fsps.bin', alloc=0xc9761e5c(0xc97a3f0c), force_ro=false, type=-1)
CBFS: Found 'fsps.bin' @0x1a1fc0 size 0x102cd in mcache @0xc97dd208
waiting for thread
took 1 us <-- fsps.bin was preloaded
CBFS DEBUG: get_preload_rdev(name='fsps.bin') preload successful
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5a728047b8ad92d70bba8485017579aa3df48d95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
This will enable reading FSP-S/M using the SPI DMA controller.
BUG=B:179699789
TEST=Build guybrush with SPI DMA enabled and verify alignment is set
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I282b9989d8e95c93603c6f69616a8f236a4e2e35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Use the functionally-equivalent common Azalia code to get rid of
redundant code.
Change-Id: Id25d2797a91b05264b1a76fa8faec0533dd5ac78
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59120
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the functionally-equivalent common Azalia code to get rid of
redundant code.
Change-Id: I83cf1a3a1a3854c9283ccac5e254357a32638dda
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59118
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the `azalia_program_verb_table()` function in preparation to
deduplicate Azalia init code.
Change-Id: I22cfee41e001c9ecf4fbac37aadbd12f43ac8aaf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59116
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move SGX ACPI code to block/acpi. Also move the register definitions
there, since they are misplaced in intelblocks/msr.h and are used only
once anyways.
Change-Id: I089d0ee97c37df2be060b5996183201bfa9b49ca
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
List of changes:
1. Create Module Type macros as per Memory Type
(i.e. DDR2/DDR3/DDR4/DDR5/LPDDR4/LPDDR5) and fix compilation
issue due to renaming of existing macros due to scoping the Memory
Type.
2. Use dedicated Memory Type and Module type for `Form Factor`
and `TypeDetail` conversion using `get_spd_info()` function.
3. Create a new API (convert_form_factor_to_module_type()) for
`Form Factor` to 'Module type' conversion as per `Memory Type`.
4. Add new argument as `Memory Type` to
smbios_form_factor_to_spd_mod_type() so that it can internally
call convert_form_factor_to_module_type() for `Module Type`
conversion.
5. Update `test_smbios_form_factor_to_spd_mod_type()` to
accommodate different memory types.
6. Skip fixed module type to form factor conversion using DDR2 SPD4
specification (inside dimm_info_fill()).
Refer to datasheet SPD4.1.2.M-1 for LPDDRx and SPD4.1.2.L-3 for DDRx.
BUG=b:194659789
TEST=Refer to dmidecode -t 17 output as below:
Without this code change:
Handle 0x0012, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 16 bits
Size: 2048 MB
Form Factor: Unknown
....
With this code change:
Handle 0x0012, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 16 bits
Size: 2048 MB
Form Factor: Row Of Chips
....
Change-Id: Ia337ac8f50b61ae78d86a07c7a86aa9c248bad50
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Since the if block contains multiple statements, it uses curly braces
around them, so also add curly braces around the else block even though
it only contains one statement.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia8d6b45ec16916ff77078446414de259cffa1475
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59070
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, the MMCONF Kconfigs only support the Enhanced Configuration
Access mechanism (ECAM) method for accessing the PCI config address
space. Some platforms have a different way of mapping the PCI config
space to memory. This patch renames the following configs to
make it clear that these configs are ECAM-specific:
- NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT
- MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT
- MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS
- MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER
- MMCONF_LENGTH --> ECAM_MMCONF_LENGTH
Please refer to CB:57861 "Proposed coreboot Changes" for more
details.
BUG=b:181098581
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max
Make sure Jenkins verifies that builds on other boards
Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Use bitwise or instead of additions to build bit masks with multiple
bits set.
TEST=Timeless build results in identical image on amd/mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I42cc6686d8fa3f694a46ba4ca801a822ef1db1d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
In both the Picasso PPR (rev 3.16) and the Cezanne PPR (rev 3.03) bit 16
of the misc I2C pad control registers is defined as BiasCrtEn, so rename
I2C_PAD_CTRL_BIOS_CRT_EN to I2C_PAD_CTRL_BIAS_CRT_EN.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If39ac17a433cb90c944fdde038cd246a995e193a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59028
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GNVS should not be used for values that are static at runtime. Thus,
use SSDT for the SGX fields.
Change-Id: Icf9f035e0c2b8617eef82fb043293bcb913e3012
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Avoid indirect <vc/google/chromeos/chromeos.h> as the
files really only need <security/vboot/vboot_common.h>.
Change-Id: Ic02bd5dcdde0bb5c8be0e2c52c20048ed0d4ad94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Technically, it's not depending on the hardware but on the software
(OS/payload), if the PM Timer is optional. OSes with ACPI >= 5.0A
support disabling of the PM Timer, when the respective FADT flag is
unset. Thus, drop this guard.
For platforms without hardware PM Timer (Apollo Lake, Gemini Lake) the
Kconfig `USE_PM_ACPI_TIMER` depends on `!NO_PM_ACPI_TIMER`.
As of this change, new platforms must either implement code for
disabling the hardware PM timer or select `NO_PM_ACPI_TIMER` if no such
is present.
Change-Id: I973ad418ba43cbd80b023abf94d3548edc53a561
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lance Zhao
We no longer need to do this since we relocate at runtime.
BUG=b:179699789
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibef849d5b3f0290cb7b7c5ff18aabe002bf53344
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The follow up CLs will use CBFS_PRELOAD. The default CBFS_CACHE_SIZE was
derived by examining the `cbfstool print` output and summing the files
we intend to preload.
BUG=b:179699789
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I208067e6ceec6ffb602a87bee3bf99a0a75c822d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This gives us a knob that can be controlled via a .config to
enable/disable file preloading. I left the option disabled because
there is currently a race condition that can cause data corruption when
using the SPI DMA controller. The fix will actually introduce a
boot time regression because the preloads are happening at the same time
as the elog init. I want to keep preloading disabled for now until
I get all the sequencing worked out.
BUG=b:179699789
TEST=Boot guybrush and verify no preloading happens.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie839e54fa38b81a5d18715f190c0c92467bd9371
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Since all other defines for the number of certain things are at the top
of the file, move NUMBER_SMITYPES there as well to keep things
consistent.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idfb599531d6cc382ab258bd1eae89e7b35fa9e79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
SCIMAPS is the total number of SCI to GEVENT mappings. configure_scimap
returns early when the scimap is greater or equal than SCIMAPS, so for
SMITYPE_ACDC_TIMER it returned early without doing what was expected
from it to do despite that being a valid value, so fix this off-by-one.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibaf8c5618ddbf0b8d4cd612a7f1347d8562bbfcb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
EINT event mask register is used to mask EINT wakeup source.
All wakeup sources are masked by default. Since most MediaTek SoCs do
not have this design, we can't modify the kernel EINT upstream driver to
solve the issue 'Can't wake using power button (cros_ec) or touchpad'.
So we add a driver here to unmask all wakeup sources.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I84946c2c74dd233419cb94f013a42c734363baf7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The NOR-Flash can be configured on SPI0 or TDM-RX GPIOs so we have to
provide an init function in SoC for the mainboard to select right
configuration.
TEST=boot to romstage
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I285ec64ace8b72a48ef1d481d366bd67cb9b0337
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Rewrite level type check and use unsigned types. In addition, also use
unsigned types in the `get_cpu_count()` function.
Change-Id: I63f236f0f94f9412ec03ae25781befe619cf7c1f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reduce the visibility of the `get_threads_per_package()` function and
retype its return value to `unsigned int`.
Change-Id: Ie71730d9a89eb7c4bb82d09d140fbcec7a6fe5f3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
