We should configure i8254/i8259 down in to the southbridge rather than
romstage of every AGESA/CIMx board much like Intel boards do.
Change-Id: Id7c4f0baa0819d52aef9b0ee03c20d0fa16b9352
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5669
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The SoC needs to provide a 32k clock signal SUSCLK for
some modems to work properly, so this enables the signal.
BUG=chrome-os-partner:24425
TEST=Manual, check SUSCLK pin with a scope.
Change-Id: Ibc0d5bb38a2c3e16f381dfc256097fdced67fd1c
Reviewed-on: https://chromium-review.googlesource.com/180101
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Bernie Thompson <bhthompson@chromium.org>
Signed-off-by: Bernie Thompson <bhthompson@chromium.org>
Tested-by: Bernie Thompson <bhthompson@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5722
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Tested-by: build bot (Jenkins)
eMMC CLK was incorrectly configured as PULL_UP, but should have been
PULL_DOWN. 2K pulls somehow masked this problem.
BUG=chrome-os-partner:24353
TEST=Verify eMMC is bootable on Rambi on boards that previously failed
with an all-20K, all-PU eMMC pin configuration.
BRANCH=None
Change-Id: I0cbb6ebbb6818f83402b99330728266b09a0f5d6
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181034
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5026
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
The BISOC.EXIT_SELF_REFRESH_LATENCY field should
not be updated from the default.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: I6e701a520513372318258648e998dd8c7ab29ea4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180730
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5025
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Not used currently on rambi board. Disable in case it
saves power.
BUG=chrome-os-partner:23862
BRANCH=none
TEST=build and boot on rambi
Change-Id: Idb870c2cfa88cb6c3f1ada3caf0db566e33ec1eb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180084
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5020
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
With the ACPI GNVS exported and depthcharge changed to
initialize eMMC in ACPI mode we can now put the SCC
devices into ACPI mode.
BUG=chrome-os-partner:24380
BRANCH=none
TEST=build and boot on rambi, test eMMC and SD card
Change-Id: I39716198f8227c0c3293ac23eb09660792e2c51b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179901
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5018
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Make sure reg_script is executed before the device is put into
ACPI mode.
BUG=chrome-os-partner:24380
BRANCH=none
TEST=build and boot rambi from eMMC in ACPI mode
Change-Id: I4090babbfc7fb0f3be4da869386e998d87a513ba
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179896
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5017
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Since this file will get added to payloads it is useful if it
exports what offset in NVS it lives.
BUG=chrome-os-partner:24380
BRANCH=none
TEST=build and boot rambi with emmc in ACPI mode
Change-Id: I52860980c91dfe2525628e142b34ca192e69b258
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179848
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5014
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Make use of the ITE common Super I/O framework and there-by removing any
hard coding of Super I/O base address.
Change-Id: I14af89d2727d7c6bac0f9840043c430726297429
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5717
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Following the reasoning of:
cf7b498 superio/fintek/*: Factor out generic romstage component
Change-Id: I4c0a9a5a7786eb8fcb0c3ed6251c7fe9bbbadae7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5585
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Provide devicetree.cb RAMstage configuration of this superio component.
Change-Id: I376d2fb6dafc301cbc437518012f8c43b0af4be2
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5668
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
No need to pass CPP down to SeaBIOS, it's not
architecture specific and they define their own
variable.
Change-Id: I811aaf3929fa11cc01b7f168ccd310008e21e60c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5715
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Remove arch-level Kconfig menu option as it shows all available architectures in
make menuconfig. Instead pull the bootblock options for choice and update image
to top-level Kconfig since it is already present for both x86 and arm.
Change-Id: Iab9c4539f05cd54a7f751565fefcaf7b6f0edc86
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5673
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Lines with 'select SERIAL_CPU_INIT' where redundant with the
default being yes. Since there is no 'unselect SERIAL_CPU_INIT'
possibility, invert the default and rename option.
This squelches Kconfig warnings about unmet dependencies.
Change-Id: Iae546c56006278489ebae10f2daa627af48abe94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5700
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Turn on WDT support in the devicetree. Turn off CIR support.
Dispense with old commentary.
Change-Id: Icf0c0e12a0ed7ce6c3b6176653e076ffc2ba937e
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5698
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Turns out there are a few minor differences of the LDN's in the AD rev.
of this Fintek chip. 0x07 is in fact the WDT so renaming and remove the
now incorrect io mask. Add missing CIR LDN functionality and touch up
src inline doc.
Change-Id: I440aebad71d62d199d3283dd061933e76b21dda5
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5696
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
In order to use the same reference code on S3 resume
that was booted the program needs to be cached. Piggy
back on the ramstage cache to save the loaded reference
code program.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed. Noted locations of reference
code caching and load addresses in console.
Change-Id: I90ceaf5697e8c269c3244370519d4d8a8ee2eb4a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179777
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5013
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Allow ramstage cache to be used from ramstage proper. Also
add a helper function for checking validity of ramstage
cache structure.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: If1f2ad1bcf64504b42e315be243a12432b50e3d5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179775
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5011
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Certain code paths want to know if S3 resume is
happening. However, the current baytrail code doesn't
note S3 resume early enough. Therefore, mark S3
resume just after pattr setup.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: I5e5cc285940e4567521afb8483614ce6f813ddde
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179774
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5010
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The inclusion of reg_script_run_on_dev() allows
for removing some of the chained reg_scripts just
to set up the device context. Use the new reg_script
function in those cases.
BUG=None
BRANCH=None
TEST=Built and booted. Didn't see any bizarre dmesg or coreboot
console output.
Change-Id: I3207449424c1efe92186125004d5aea1bb5ba438
Signed-off-by: Aaron Durbin <adurbin@chromium.og>
Reviewed-on: https://chromium-review.googlesource.com/179541
Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5009
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
According to the reference code all these registers
need to be set to their best known values.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted. Suspend and wake. No idea about
observable impact yet.
Change-Id: I0e31505a165eee1d177e5d726edcfa6947430476
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179749
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5008
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
There's a slew of ports required to initialize baytrail's
perf and power values. Therefore, add the necessary
functionality in the iosf module as well as the reg_script
library.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted.
Change-Id: Id45def82f9b173abeba0e67e4055f21853e62772
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179748
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5007
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The iosf access functions already use some common code,
however there is a duplication for setting up the proper
control register for port and opcode. Introduce macros
to remove this verbosity.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted. Suspend and wake.
Change-Id: I5bad7e2a11fa8e8bd4a3d7fa53d917b2565644f8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179747
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5006
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The reg_script library has proven to be useful. It's
also shown that many scripts operate on devices. However,
certain code paths run the same script on multiple,
but different, devices. In order to make that easier
introduce reg_script_run_on_dev() which takes a device
as a parameter. That way, chained reg_scripts are not
scrictly needed to run the same script on multiple devices.
BUG=None
BRANCH=None
TEST=Built.
Change-Id: I273499af4d303ebd7dc19e9b635ca23cf9bb2225
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179540
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5005
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This adds the option to put LPSS and SCC devices into ACPI mode
by saving their BAR0 and BAR1 base addresses in a new device
NVS structure that is placed at offset 0x1000 within the global
NVS table.
The Chrome NVS strcture is padded out to 0xf00 bytes so there
is a clean offset to work with as it will need to be used by
depthcharge to know what addresses devices live at.
A few ACPI Mode IRQs are fixed up, DMA1 and DMA2 are swapped and
the EMMC 4.5 IRQ is changed to 44.
New ACPI code is provided to instantiate the LPSS and SCC devices
with the magic HID values from Intel so the kernel drivers can
locate and use them.
The default is still for devices to be in PCI mode so this does
not have any real effect without it being enabled in the mainboard
devicetree.
Note: this needs the updated IASL compiler which is in the CQ now
because it uses the FixedDMA() ACPI operator.
BUG=chrome-os-partner:23505,chrome-os-partner:24380
CQ-DEPEND=CL:179459,CL:179364
BRANCH=none
TEST=manual tests on rambi device:
1) build and boot with devices still in PCI mode and ensure that
nothing is changed
2) enable lpss_acpi_mode and see I2C devices detected by the kernel
in ACPI mode. Note that by itself this breaks trackpad probing so
that will need to be implemented before it is enabled.
3) enable scc_acpi_mode and see EMMC and SDCard devices detected by
the kernel in ACPI mode. Note that this breaks depthcharge use of
the EMMC because it is not longer discoverable as a PCI device.
Change-Id: I2a007f3c4e0b06ace5172a15c696a8eaad41ed73
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179481
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5004
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The LLVM integrated assembler has some deficiencies in support for
building AGESA. See:
LLVM PR18918 - [RFE]: Missing altmacro support in integrated assembler
Disable llvm-mc for the moment until these have been addressed fully
upstream.
Change-Id: Id4131d1de04d01c0bec284f976f0ba9662b950ab
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5711
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
'prove' that clang is supported (to some extent).
Change-Id: I181f4910ba64ab9746e7ac94aa79da23cdd41dad
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5709
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Payloads using Kconfig get confused by coreboot Kconfig
configuration in environment variables. Prune them.
Change-Id: I63da2af0a15dca35d70cd65b2f74a1564aab9483
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5710
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
CPU - fsp_model_206ax:
- Remove Kconfig options and mark this as using the FSP.
- Use shared FSP cache_as_ram.inc file
Mainboard - intel/cougar_canyon2:
- Update to use the shared FSP header file.
- Modify to call copy_and_run() directly instead of returning to
cache_as_ram.inc.
Northbridge - fsp_sandybridge:
- remove mrccache, fsp_util.[ch]
- add fsp/chipset_fsp_util.[ch] with chipset specific FSP bits.
- Update to use the shared FSP header file.
These changes were validated with FSP:
CHIEFRIVER_FSP_GOLD_001_09-OCTOBER-2013.fd
SHA256: e1bbd614058675636ee45f8dc1a6dbf0e818bcdb32318b7f8d8b6ac0ce730801
MD5: 24965382fbb832f7b184d3f24157abda
Change-Id: Ibc52a78312c2fcbd1e632bc2484e4379a4f057d4
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5636
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
- Move the non chipset-specific fsp pieces out of the chipset into a
shared area. This is used by northbridge / southbrige / SOC code. It
pulls in pieces from Kconfig, Makefile and FSP specific code.
- Enabled in the CPU code with a Kconfig "select PLATFORM_USES_FSP"
Change-Id: I7ffa934c1df09b71d48a876a56e3b888685870b8
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5635
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Following the same reasoning as commit
d3043313a9 superio/fintek/f81865f: Avoid
.c includes
Clean up the early_serial #include directives in mainboard/romstage code.
Change-Id: Ia6ed36c8517a95b651fefdd855eec0ec91d73187
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5439
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Overriding global config entries in mainboard directory Kconfig
files often raise unnecessary warnings. Squelch some of those.
Change-Id: Ib5127672ae068670028aa25c8ccb5366277622f2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5699
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
For bzImages the trampoline segment is added unconditionally.
However, that segment wasn't properly being accounted for.
Explicitly add the trampoline segments like the other ones.
Change-Id: I74f6fcc2a65615bb87578a8a3a76cecf858fe856
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5702
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This enables the DPTF framework, but it doesn't do much
without some sort of kernel+user components to drive it.
BUG=chrome-os-partner:17279
BRANCH=none
TEST=build and boot on rambi, dump DSDT and look over \_SB.DPTF
Change-Id: Icb632a6e70c3912bbdfa6ef3f5c87cd79d2b8a3a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179480
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5003
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This is not complete yet but it compiles and doesn't cause
any issues by itself. It is tied into the EC pretty closely
so that is part of the same commit.
Once we have more of the EC support done it will need some
more work to make use of those new interfaces properly.
BUG=chrome-os-partner:17279
BRANCH=none
TEST=build and boot on rambi, dump DSDT and look over \_SB.DPTF
Change-Id: I4b27e38baae18627a275488d77944208950b98bd
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179459
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5002
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
These are the values that are seen with VBIOS and
may need tweaked for derivative panels.
BUG=chrome-os-partner:24367
BRANCH=none
TEST=boot on rambi in normal mode and see the panel come up
Change-Id: Ie3120ab3c5298135626e8534d3954acd263dc74b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179365
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5001
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
These need to be set before the kernel will work without
running the VBIOS option rom.
Also necessary is setting the PP_CONTROL register with
the EDP_FORCE_VDD bit.
BUG=chrome-os-partner:24367
BRANCH=none
TEST=boot on rambi in normal mode and see the panel come up
Change-Id: I495f818d581d08b80db11785fe28b601ec956b3b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179364
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5000
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Now that the SD card controller is limited to the SD card
2.0 spec it's possible to use 20K pulls for the pads.
BUG=chrome-os-partner:24423
BUG=chrome-os-partner:24312
BRANCH=None
TEST=Built and booted. Able to dd to/from /dev/mmcblk1 without
any errors.
Change-Id: Id5396c55330a84bf7a09d227507d2bfcde66a1a4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179423
Reviewed-on: http://review.coreboot.org/4999
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
The rambi board can only meet the SD card 2.0 specification.
Therefore, the controller capabilities need to be overridden
to match.
BUG=chrome-os-partner:24423
BRANCH=None
TEST=Built and booted. /sys/kernel/debug/mmc0/ios shows
high speed as maximum timing as well as 3.3V signal voltage.
Change-Id: Ib3824800852376e0f15a70584917d6692087ccfe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179415
Reviewed-on: http://review.coreboot.org/4998
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The SD card controller can have the capabilities it supports
to be overridden. Add two optional fields to the chip structure
to allow the mainboard to override the SD card controller
capabilities.
BUG=chrome-os-partner:24423
BRANCH=None
TEST=Built and booted. Noted capabilities override console output.
Change-Id: Ibfef8f765b35eeec6da969dd05f5484f8672a7b9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179414
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4997
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
The VDAT data was off by 2 bytes when reading it from the
kernel. The reason is that the header did not line up
correctly with actual ACPI code.
BUG=chrome-os-partner:24440
BRANCH=None
TEST=crossystem devsw_cur now returns either 0 or 1 depending
on state.
Change-Id: Ie78599f29cd5daf7da98db5e37fa276d24339f6a
Signed-off-by: Aaron durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179372
Reviewed-on: http://review.coreboot.org/4996
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Bay Trail has 3 banks of gpios. Therefore, in order to
properly identify a gpio the specific bank number as well
as the GPIO within that bank is needed. The SPI
write-protect GPIO is GPIO 6 within the SUS bank (offset
0x2000).
BUG=chrome-os-partner:24324
BUG=chrome-os-partner:24408
BRANCH=None
TEST=Built and booted. Looked at GPIO sysfs in the
chromeos_acpi directory.
Change-Id: Ic51b5abe3bacf6cf9b6a90cf666f1a63b098a0e3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179195
Reviewed-on: http://review.coreboot.org/4995
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
The LPE audio device needs 1MiB of memory for its firmware.
It also has a requirement that the memory needs to be on a
512MiB boundary. Just take 1MiB @ 512MiB for the LPE device.
BUG=chrome-os-partner:23791
BRANCH=None
TEST=Built and analyzed console logs for resources. Also interrogated
registres within the kernel.
Change-Id: I4d9ad5c7b5a2f3eb627b30528d738289278b3a7b
Reviewed-on: https://chromium-review.googlesource.com/179192
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4994
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
On Ubuntu /bin/sh is symlinked to /bin/dash. The
current toolchain.inc was doing some things that
dash doesn't support. Make the shell callouts more
conforming to the POSIX sh standard.
Change-Id: I26b6b82b8d6158c9029e8be9e7c088ca9e207f21
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5701
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Leave it under BOOTMODE_STRAPS to control whether these have
any functional meaning on the build.
Change-Id: Ieb59aa7ab4b1e8da6a1002e7a8e5462eb7988d35
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5643
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Edward O'Callaghan