The ShimLayer is required to start the Universal Payload. It will build
the required HOBs and pass them accordingly.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I043271994f40813d9059a89420d4311d9d5802b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Function 'setbits16' performs an 'OR' operation with the new data and
the origin register entry. This can lead to an incorrect value in the
register which can then lead to issues.
Change-Id: I0212420be770e2ffdabebbfaf5dfbf8d99d25915
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Makes it possible to configure the maximum allowed/supported DDR memory
frequency on a per mainboard basis.
Test
- Define maximum memory frequency in mainboard devicetree.cb
- Boot into Linux and run 'sudo dmidecode --type 17' to check memory
speed
- Boot into Linux and run 'phoronix-test-suite benchmark ramspeed'
Change-Id: I9e0c7225e2141e675a20b8e3f0dbe8c0b3a29b28
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68097
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
config.h is a dependency so add it.
Change-Id: Iac87039dd43aa75d49766b9a239fbd841ca6850c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68244
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Based on public NCT6686D hardware datasheet revision 0.5 which should
be similar to NCT6687D.
TEST=Dump NCT6687D, GPIO and EC registers on MSI PRO Z690-A WIFI DDR4
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I38db1de0f3d3b6de14bcb758afc9804c072c1895
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
The release of coreboot 4.18 is delayed and thus version 4.19 won't be
released in upcoming November. Instead, just mention the version to be
more flexible about the date.
Change-Id: I33213479b02c2159beca78432aca775a04409e4c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68261
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The SoC Intel Quark is unmaintained and various efforts to revive it
failed. Thus, deprecate the following components with the 4.18 release.
* Intel Quark SoC
* Intel Galileo mainboard
The support for these components will be dropped with the release 4.20.
Change-Id: I738ad74da043649107473dc0c2e6adf343e4cd35
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68260
Reviewed-by: ron minnich <rminnich@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Windows hardware tests require this field not be "Reserved".
The System76 EC firmware does not report the wake type, so it is not
possible to know if the system was powered on from the power switch or
Wake-on-LAN. In the case WoL is used, this will report the wrong value.
Change-Id: I4653c6bce2a5f0a88281fc810df5646e44f90674
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Enable SRAM in devicetree so that resources are allocated properly
for it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1d7ee4f950b31f2be6fb7bd107b5fe54785ed81a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67420
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable the P2SB so that the SPI is discoverable by the OS.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ied7a6ea706e6da86182c109ab4813fa3fcebb1f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67419
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BRANCH=none
BUG=b:234776154
TEST=build and boot Nirwen UFS, copy ISH firmware to host
file system /lib/firmware/intel/adln_ish.bin
check "dmesg |grep ish", it should show:
ish-loader: ISH firmware intel/adlnrvp_ish.bin loaded
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I89782b0b7dde1fca0130472a38628e72dfd5c26c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
First of all, make sure that `get_board_settings()` never returns NULL.
If there's a problem, return predefined values for board settings.
If the board settings definition differs between coreboot and the BMC,
the CRC will not match. Allow coreboot to use the BMC settings provided
by older BMC firmware revisions which have less settings, if the CRC of
the first N bytes matches the expected CRC.
TEST=Boot coreboot master with BMC FW R04.05, observe board settings
being honored even though coreboot's definition has an extra option.
Change-Id: I0f009b21ef0850a2af6edef1818c770171358314
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67381
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a recipe to build UniversalPayload.elf, which uses a wrapper for the
UniversalPayloadBuild.py that is hosted in the edk2 repository.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2aa318513244f576e07e72713fad3b4f7bd7c22e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
The tool "include-what-you-use" analyzes each file's headers and makes
recommendations for header files to add and remove. There are
additional scripts as part of the package that will make these changes
directly based on the recommendations, but due to the way coreboot
compiles code in/out base on Kconfig options, this isn't really safe for
the project to use.
It is a good starting point though.
To use, set the IWYU kconfig option, then build with the command:
make -k
Because this doesn't actually build any files, the -k option is needed
or make will stop after looking at the first file.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I084813f21a3c26cac1e4e134bf8a83eb8637ff63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Julius Werner <jwerner@chromium.org>
There is no option to calculate or generate the serial number and UUID
on this platform. Enable CBFS UUID and serial by default so anybody
can easily populate the missing fields.
TEST=Add UUID and serial CBFS files, boot the platform and see both
UUID and serial number are populated correctly.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ic8af889f12617d4ab6a27c6f336276c04f26244c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64640
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When system_uuid CBFS file is present and contains the UUID
in a string format, the driver will parse it and convert to binary
format to populate the SMBIOS type 1 UUID field.
TEST=Add UUID file and boot MSI PRO Z690-A DDR4 WIFI and check with
dmidecode if the UUID is populated correctly.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I22f22f4e8742716283d2fcaba4894c06cef3a4bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64639
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a new zydron variant, which is a variant of brya's skolas
baseboard. currently copy the variant file from kano.
BUG=b:250787251
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I49a41678568daef80b7cd1e3ed60ce4763034f9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68130
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some mainboards have a header connected to the SPI bus, which can be
used to connect a second flash chip and override the onboard flash. This
allows one to boot coreboot on the system without ever having to flash
the onboard flash. HP boards with this header all seem to use the same
2x8 or 2x10 header layout, so document the pinout.
Change-Id: Ic2bf1244adfb78872340f212519c6ab33e26646a
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67818
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
birman is the reference board for the morgana SoC. It needs to be
updated to match the actual board design as well.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I4b16854c954949217a76c3d4f04ddc4001f64337
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68196
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is not critical functionality and doesn't need a build-time error.
Having it as a build time error causes a chicken & egg issue where
the chipset needs to be added before it can be added to this file, but
the header file fails the build because the chipset is unknown.
It's not practical to exclude these files from the new platform builds
because the PSP functionality is thoroughly embedded into the coreboot
structure.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ib02bbe1f9ffb343e1ff7c2bfdc45e7edffe7aaed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
This is an initial framework for the Morgana SoC.
TODOs have been added to the files for both customization and
commonization.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: If92e129db10d41595e1dc18a7c1dfe99d57790cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68195
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows amdfwtool to recognize the names for the upcoming morgana
and glinda SoCs. It does not yet do anything for those SoCs, but this
allows the morgana SoC to build.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I766ce4a5863c55cbc4bef074ac5219b498c48c7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68193
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Specifying a build target only applies to UefiPayloadPkg, so guard it
against the relevant Kconfig option.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia4597b5ed76616e39cec45f8a69be9f1ccd72d4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
The silent switch, `-s`, only works for building UefiPayloadPkg. Guard
it against the relevant Kconfig option so that it doesn't cause
problems with other targets.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I5a5df636e6484a435c849c6d19c7cb61e8e62ee6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68181
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix shell variable "LINTDIR" so that helper_functions.sh can be found.
TEST=`./util/lint/lint lint-stable --junit` no longer prints "cannot
open /helper_functions.sh: No such file"
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I68f2e65fa1c9297ad6b58b77576deaeef8bd76e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
A spelling mistake in the markdown reference to the coreboot vs EDK II
bootflow diagram was previously fixed, but the actual filename was not
changed resulting in a broken reference.
Change-Id: I512646e9af312ba2e1db8f597f6fffa8d54a3515
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67782
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Create the frostflow variant of the skyrim reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:240970782
BRANCH=None
TEST=util/abuild/abuild -p none -t google/skyrim -x -a
make sure the build includes GOOGLE_FROSTFLOW
Signed-off-by: Chao Gui <chaogui@google.com>
Change-Id: I937e6562094968824e73bfa20390b3ec8b24dfa0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Write the value for reset cause registers to the EEPROM for debugging.
Change-Id: I827f38731fd868aac72103957e01aac8263f1cd3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67483
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adjust the EEPROM layout to account for two new fields: board part
number and product part number. In addition, put them in a Type 11
SMBIOS table (OEM Strings). Also, rename a macro to better reflect
its purpose.
Change-Id: I26c17ab37859c3306fe72c3f0cdc1d3787b48157
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67759
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Upstream edk2 doesn't work, but we still have the option for it
for testing.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I6ec9f4746640baa030762650ab7b83d85ab8c1e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>