Introduce a new field in the board settings EEPROM region to control
whether BIOS menu is to be enabled. This field will be used in EDK2
payload.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I0af81c9e70a0088caea6bc7e2b81eab9a123c0f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
change clk_src and clk_req to 4 for LAN_I225V based on
ADL_Moli_SC_MB_20220601.pdf.
BUG=b:235768639
TEST=emerge-brask coreboot and check LAN_I225V can connect.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I323726df84d07703402da9da44b1882a0cdc1e33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Remove the cnvi_bt_audio_offload because it is already probed in
variant.c for moli.
BUG=b:235426221
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I15077ca161b6283e764105d1c2fbc59ead1fd761
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Apparently all nine HP Sandy/Ivy laptop variants select
MAINBOARD_USES_IFD_GBE_REGION. So let's move it to the COMMON section.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Change-Id: I48e0d03c59d3ba013b479b59df8a15a0f8d23c50
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This patch implements API to sync between core
PRMRR(Processor Reserved Memory Range Registers).
Read PRMRR base and limit value from BSP and apply it on the
rest of the cores.
BUG=b:233199592
TEST=Build and boot google/taeko to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I720669139429afc3d8c8d15c0ce15f1524f22e4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Currently, ADL FSP headers and RPL FSP headers differ. Set a RPL only
upd for adlrvp with Raptor Lake silicon. This code can be removed once
ADL and RPL start using the same FSP.
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=build adlrvp_rpl_ext_ec
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I4e69323949233aa8c325a757b28b9d80cbdf4322
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
The general purpose PCIe clock outputs 0, 1 and 3 are used with their
corresponding clock request pins, so set the gpp_clk_config to
GPP_CLK_REQ for those and disable the unused output 2. This matches the
DXIO descriptor in port_descriptors.c.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I38ab8d6d824617509fdd18f06d5593889ec50666
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65112
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In x86 processor as per Software Developer's manual there are 2 ways to
get CPU topology by querying the processor. BIOS can use CPUID
instruction using CPUID_EXTENDED_CPU_TOPOLOGY (0x0B) as input or
CPUID_EXTENDED_CPU_TOPOLOGY_V2 (0x1F) as an input. Both will return
valid CPU topology data.
While CPUID_EXTENDED_CPU_TOPOLOGY (0x0B) returns data related to number
of threads, core and package, CPUID_EXTENDED_CPU_TOPOLOGY_V2 (0x1F)
provides more granular information regarding Die, package etc.
coreboot uses V2 to in order to query and return CPU topology data as of
now since that's the highest instruction of CPUID which is supported,
there is a mismatch in the way FSP processes the data.
FSP queries coreboot MP services to get CPU topology data which uses
structure which is either compatible with CPUID_EXTENDED_CPU_TOPOLOGY or
CPUID_EXTENDED_CPU_TOPOLOGY_V2. Since coreboot returns V2 data in
structure which is expecting data for CPUID_EXTENDED_CPU_TOPOLOGY, there
is hang observed on ADL_N CPUs.
To solve this problem coreboot should assign CPUID_EXTENDED_CPU_TOPOLOGY
data to processor_info_buffer->Location structure so remove use of
CPUID_EXTENDED_CPU_TOPOLOGY_V2
Ref EDK2 code: https://github.com/tianocore/edk2/tree/edk2-stable202202
Files:
MdePkg/Include/Protocol/MpService.h#L182
UefiCpuPkg/Library/MpInitLib/MpLib.c#L2127
UefiCpuPkg/Library/MpInitLib/MpLib.c#L2120
Ref doc: Software Developer’s Manual volume 3 CH 8.9
BUG=b:220652104
TEST=Build and boot ADL-N RVP with debug FSP and verify CPU topology
value and observe system boots (no hang).
Change-Id: I1e6832fb03fcc59d33df0ba1664019727185d10a
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
`make clean` never thoroughly removed LinuxBoot build artifacts. This
change checks for kernel directories present in the project directory
and deletes all of them, if found.
Signed-off-by: Patrik Tesarik <patrik.tesarik@9elements.com>
Change-Id: Ia056ac6608e3631dfc270ba5c2f32216c3e1ac50
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65098
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In addition to change CB:40316 this commit proposes a change of default
behavior inside of the LinuxBoot toolchain.
Currently the defaults build a LinuxBoot payload which boots into the
u-root shell and waits for input. In fact it does not deliver any
bootloader with it, but the build image is on the other hand rather
small.
This commit changes the defaults in a way that the LinuxBoot
bootloader will actually be able to boot a local or remote system image.
In consequence the build payload size is rather big, but accepted for a
working out-of-the-box startup behavior.
See discussion on that topic in the above mentioned change.
Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de>
Change-Id: Ieaba7e523aef10c467a8bea29ae323e22324b225
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40527
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add the file template for creating a new variant of Nissa.
BUG=b:229550821
Signed-off-by: Shou-Chieh Hsu <shouchieh@google.com>
Change-Id: I04f75ff91f9851b82641f703ba950b04c22e2e72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
This change fixes wrong type-C port number for voxel. Voxel
uses tcss_usb3_port1 not tcss_usb3_port3.
BUG=b:231344977
BRANCH=volteer
TEST=Check the transactions are happening on correct port. Also checked
retimer firmware update on both the ports.
Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com>
Change-Id: Iba7b3b15296bed99d3626a6d53dfd59e8d20fe5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64022
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update configs for NixOS 22.05.
pulseaudio-modules-bt has been abandoned, and is superseded by
pulseaudio's native Bluetooth functionality. Thus, remove it.
Change-Id: Ic3b1dbc3c2ab092b576ba2151c93c74d4f298efc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Sabrina only has 4 PCIe clock outputs with corresponding clock request
pins available, so only make those 4 configurable in devicetree and
disable the rest unconditionally.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5d34fa680dd20a6eec86cc278c1c901b3231df83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The u-root toolkit dropped the original uinit bootloader in the master
branch and respectively the systemboot-option in templates.go. In
consequence the LinuxBoot builds will boot into the u-root shell and
waiting for input. This commit enables the reuse of the -uinitcmd flag
to specify a command, which runs after the u-root init-process.
Systemboot as a bootloader wrapper will mimic a BIOS/UEFI boot device
selection. Other preselections, i.e. stboot and boot2 are implemented as
well. Custom strings or programs can be set as well, but they cannot
contain program flags. E.g. 'fbnetboot -class linuxboot' will not work,
because they aren't symlinkable.
This commit and its respective LinuxBoot builds with systemboot, none
and one custom option have been tested successfully on a UP squared
single board computer with the intended behavior.
Change-Id: I4ac3409040ea77a1836f90f43fba07d2cd05a952
Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This is a breaking change for now when using latest u-root main, which
is the default behavior in LinuxBoot.
u-root switched to golang modules and therefore `go get` is not the
standard behavior anymore. The workaround for this is to pull the
repository and build directly in the directory for now. Another apporach
would be to use `go install $pkg@latest` to install the binary at that
particular version into the golang binary path.
Currently missing is a control structure to enable the build process for
legacy versions <v0.8.0.
Signed-off-by: Patrik Tesarik <patrik.tesarik@9elements.com>
Change-Id: Ifa03504da6fa321ffc6d2506b27ebd2e3ed9961b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65090
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Update SoC GPIO setting of unused I2C camera pins according to beadrix
schematics.
GPP_H6 : NF1 -> NC (AP_I2C_CAM_SDA)
GPP_H7 : NF1 -> NC (AP_I2C_CAM_SCL)
BRANCH=dedede
BUG=b:235005592
TEST=on beadrix, validated by beadrix's camera still working properly.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I8be57406a44096c764c1faa8f45267d08c4694fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64971
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Intel LPC devices have generic and fix IO decode ranges. This CL is
smarter about using generic ones, by using the fixed ones first.
Change-Id: Ifd98bcc639ee08d068956a33b0e12cc70211ca2d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65097
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The APOB data in DRAM is larger than the 96 kBytes of RW_MRC_CACHE, so
it won't fit in the flash and makes soc_update_apob_cache return early
before writing the APOB data from DRAM into the flash with this warning:
[WARN ] RAM APOB data is too large 1db18 > 18000
Increasing the RW_MRC_CACHE size to 120 kByte fixes this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I763d20f504d4f5b7cea68f21f409de9a1035f440
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64555
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The T6 of PS8640 power on sequence should be larger than 0ms, but it's
-0.062ms now. Add 100us delay between VRF12 and VCN33. The PS8640
power-on sequence is described in the "PS8640_DS_V1.4_20200210.docx".
BUG=b:235448279
BRANCH=None
TEST=The sequence T6 is larger than 0ms when power on.
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I0b8a37d6119dc027a9d1c0a62c087b0a7ef14cac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Some eMMCs (for example, Kingston-EMMC64G-TX29-HP) may enter the ready
state by sending CMD1 twice. If it is in the ready state, then the
payload (for example, depthcharge) will not send CMD1, but the access
mode is only available from the response of CMD1.
Therefore, we need to pass the access mode to the payload by defining
the following types:
- MMC_STATUS_CMD1_READY: in ready state and access mode is byte mode.
- MMC_STATUS_CMD1_READY_HCS: in ready state and access mode is sector
mode.
BUG=b:234672726
BRANCH=cherry
TEST=boot ok
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Change-Id: Iad905781d8ba0105911cf87a6b845cd8df57521e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65054
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The TBT device can't be recognized after we re-plug it at DB type-c
port. Intel found that tbt_pcie_rp0 has mapping error after each
re-plug. From Intel suggestion, we enable TBT PCIe RP0 to fix this
problem and take this as short term solution. Intel will implement
re-mapping mechanism in ACPI for long term solution.
BUG=b:230141802
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I61429033dfe64d67916167bb901bdd8246db953e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Make the config file reflect reality instead of using the old cezanne
copy.
TEST=Build chausie
BUG=b:220848549
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I8362bc19875ae152e0deab7f64d5b1c50929b95b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Modify the config file, consumed by amdfwtool, to use "sabrina" and
"SBR" named files.
TEST=build chausie using updated amd_blobs
BUG=b:220848549
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ia993644e67d14792d753cc74a957529d15be18f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add FM350GL 5G WWAN support using drivers/wwan/fm and additional PM
features from RTD3.
TEST=Check SSDT table to see if the PXSX device and PowerResource RTD3
are generated under the root port.
BRANCH=firmware-brya-14505.B
Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Change-Id: I74434d833086f639927d8369f8a6e3af31dd99e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64648
Reviewed-by: Jeremy Compostella <jeremy.compostella@intel.corp-partner.google.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Until FSP for RPL and ADL align, mainboards using RPL should select
SOC_INTEL_RAPTORLAKE and SOC_INTEL_ALDERLAKE_PCH_* together.
Currently, ADL FSP headers and RPL FSP headers differ. Use RPL FSP
header with Raptor Lake silicon. This code can be removed once ADL
and RPL start using the same FSP.
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=build adlrvp_rpl_ext_ec
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Iaf95352b9cafb81f23522bcf63753d199c0420eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
The Sabrina APU has a maximum configuration of 4 physical cores with 2
threads each, so a total of 8 CPU cores.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I627ed78ffba6098726c9c8ec55b60665503240ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65068
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The MCA bank names were checked against PPR #57243 Rev 1.53.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1b947e686a0306d4468203103f91107c15ececc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Sabrina slightly changed the names of microcode patches. Adding a
wildcard to support the new name without breaking current builds that
are using the placeholder CZN binaries.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I86caf0ba5c15f64a9a1f0e76a3186919e5e761a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65069
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set the MS bit in EC SW02 register to enable s0i3
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I97b6adf48b49635251c70015f1d87fd8ca11d539
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Newer host versions of gnatbind miss these when building the cross
gnat1 and gnatbind.
Tested with the following host compilers with and without bootstrapping
that the resulting coreboot images of three boards stay the same:
* GCC 4.9.2 (Debian)
* GCC 6.3 (Debian)
* GCC 7.4 (Debian)
* GCC 8.3 (Debian)
* GCC 9.4 (Debian)
* GCC 10.2 (Debian)
* GCC 12.1 (ArchLinux)
Change-Id: I09c6b3cc7b15f1c505acd3ec2c1959b101d6dfb7
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65000
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
We used to disable individual warnings that are expected when building
our GCC version with a newer one. Not all warnings can be disabled
indvidually, though, and it's much easier to simply allow warnings.
As a plus, we get the warnings in the log (in case anybody would ever
look into it).
Partially fixes building with host GCC 12.1.
Change-Id: I8fafec4fc49db73b6dba311c775eea2cc92a9b48
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64999
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Set all FSP S UPDs that set IDs to 0, which allows them to be set
by coreboot.
Tested on StarLite Mk IV and LPC now has the correct device ID of
0x31e8, where previously it had 0x7270.
The UPDs differ APL and GLK, but the ones configured in this patch
have been there since their initial releases.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I034c9dc9d81c4d775dfff0994c9a6be823689b1c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
1. enable DDI_PORT_1, DDI_PORT_3 hot plug detection to let
tcp0 and tcp2 can display
2. remove DDI_ENABLE_DDC for Port 2, because tcp-dp dosen't need to
enable DDC
BUG=b:234521799
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I1354b82d881ebd838c310b32ae28ac2628ab8c9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64819
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In Adl-P RVP, those interfaces are used as USB ports.
BRANCH=firmware-brya-14505.B
Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Change-Id: I322280ab02361e3a2a5925d69f33b23453d36dbf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63946
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Jeremy Compostella <jeremy.compostella@intel.corp-partner.google.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use clock src and clock req to 7 for x4 slot.
Remove free running clock setting for clock 6.
Configure gpio for source clock OEB native function going to x4 slot.
BUG=b:233252409
BRANCH=firmware-brya-14505.B
TEST=insert SD AIC to x4 slot. boot to OS and use 'lspci' to check
the device.
ex:
58:00.0 SD Host controller: O2 Micro, Inc. Device 8621 (rev 01)
NOTE: The bus number varies.
Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Change-Id: Iba5d83d133b6ae8cd389ddd971db308170094300
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Add fan speed rpm control for DPTF based Active2 policy as per
document #626708, by utilizing existing FAN0 variable from
src/ec/google/chromeec/acpi/emem.asl#18.
There is no corresponding EC change required for this policy
support because EC fan code already exporting this rpm value
using EC_MEMMAP_FAN for FAN0.
BUG=b:224457192
BRANCH=None
TEST=Built and booted on ADL-P based Brya system and
verify the fan speed in rpm under sysfs path
cat /sys/bus/acpi/devices/INTC1048\:00/fan_speed_rpm.
Change-Id: Ibb1646b1fb1659fd853ece97d97bb9dee2a3f57e
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Sabrina uses the SVI3 spec for VID tables which is incompatible with the
SVI2 spec used on PCO/CZN. Move the defines from common to soc and
update the decoding for sabrina.
See NDA docs #56413 for SVI3 and #48022 for SVI2 VID tables
TEST=timeless builds on mandolin/majolica for PCO/CZN
build chausie and verify pstate power is correct in ACPI tables
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I915e962f11615246690c6be1bee3533336a808f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65001
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Currently, custom TianoCore builds are allowed, but those may need
different parameters. Add a Kconfig option to specify additional
parameters to be appended to build command.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I025459ae94592103b4be0c68b422100b7c649d34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
When the CMOS option `power_profile` is set to Power Saver, disable
Burst.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4d9367306b3c0e83252cea3ee4c2733c8729d10c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Shotzo is not a laptop (it is a Chromebase), therefore deselect
BASEBOARD_DEDEDE_LAPTOP.
BUG=b:235303242
BRANCH=dedede
TEST=build
Change-Id: I4669ef163e4bd8f2de556a051197802ee2d54927
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65015
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Lean Sheng Tan