Kconfigs symbols of type bool are always defined, and can be tested with
the IS_ENABLED() macro.
symbol type except string.
Change-Id: Ic4ba79f519ee2a53d39c10859bbfa9c32015b19d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10885
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Display a warning if CONFIG_HUDSON_FWM_POSITION is not inside CBFS.
This can be extended to other Kconfig values for CBFS.
Change-Id: I2423f7b361dda8aac5dab409fa7b656de486f635
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10683
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch calculates the address where the chipset firmware descriptor
should be located and compares it against the actual value from Kconfig.
If the two don't match, it puts up a warning.
This could probably replace the config variable completely, but I wanted
to see how other people felt before doing that. I seem to recall that
the value used to be calculated, so I figure that there must be a reason
it's done this way at this point.
If we do want to keep the Kconfig setting, this patch could also be
modified to just verify that the HUDSON_FWM_POSITION is inside the ROM
space.
Change-Id: I94addf463e2c694a94eef218ec855103a3bb5da5
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10682
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The CBFS_BASE_ADDRESS can be compared against values used with cbfstool
to generate warnings. This can help cut down on mistakes and debug
time.
Change-Id: I149007dd637661f799a0f2cdb079d11df726ca86
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10681
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add macros to standardize math done in the Makefiles in a posix
compliant manner.
int-multiply takes an arbitrary list of values to multiply, the same as
the int-addition macro.
The other macros only work on two values at a time.
Change-Id: I3b754b9bcde26f33edc4f945d5af3d5444f383c7
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10874
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
rmodule.c: In function ‘rmodule_create’:
rmodule.c:287:29: error: ‘phdr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
(phdr->p_vaddr + phdr->p_memsz))) {
^
rmodule.c:204:14: note: ‘phdr’ was declared here
Elf64_Phdr *phdr;
^
Change-Id: I94a235253610348484eef218ec855103a3bb5da5
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Reviewed-on: http://review.coreboot.org/10881
Tested-by: build bot (Jenkins)
Reviewed-by: Francis Rowe <info@gluglug.org.uk>
While running ramstage with the EARLY_CBMEM_INIT config the timestamp
cache was re-initialized and subsequently used. The result was that
the ramstage timestamps would be dropped from cbmem. The reason
is that the ramstage timestamps perpetually lived in ramstage BSS
never getting sync'd back into cbmem. The fix is to honor the
cache state in ramstage in the timestamp_init() path.
Also, make cache_state a fixed bit width to allow for different
architectures across the pre-ramstage stages.
TEST=Used qemu-armv7 as a test harness with debugging info.
Change-Id: Ibb276e513278e81cb741b1e1f6dbd1e8051cc907
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10880
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Fix up commit f44ac13d (Add TCPA table.) by adding an entry for
`CBMEM_ID_TCPA_LOG` to the macro `CBMEM_ID_TO_NAME_TABLE`.
Currently, printing the CBMEM table of contents the name is missing.
$ sudo cbmem -l
CBMEM table of contents:
ID START LENGTH
[…]
6. 54435041 c7fa8ff8 00010000
[…]
Adding an entry and rebuilding the utility cbmem, the name `TCPA_LOG` is
shown.
$ sudo cbmem -l
CBMEM table of contents:
ID START LENGTH
[…]
6. TCPA LOG c7fa8ff8 00010000
[…]
Change-Id: I089ea714349e07b322330bc11f723cc031c61c56
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/10856
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Fix up commit f44ac13d (Add TCPA table.) by moving the entry to the
correct position so that all entries are sorted.
Change-Id: Ib68deb525a942051e1063ea2ec0a3e3b4a937024
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/10855
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Include the microcode files from the microcode subdirectory.
BRANCH=none
BUG=None
TEST=Build and run on cyan.
Change-Id: I4c8bf64d221d9ead18f1b7d6e1f01f61d88c9b25
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10873
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Update Makefile.inc to use the simplified CBFS image type.
BRANCH=none
BUG=None
TEST=Build and run on cyan
Change-Id: Ibb8413ab90b147e9d26d32639a8822c57ca54a46
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10871
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Useful information, record it in the destination directory,
together with .config.
Change-Id: Icf3282f61f502b37f9f06d7d5a0a630f49c96ed2
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10864
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of having a second copy that already within 2-3 days
becamer quite outdated, use the same xcompile copy for coreboot
and libpayload, as we do with Kconfig already.
This requires a simple change to the top level xcompile to understand
both CONFIG_COMPILER_GCC and CONFIG_LP_COMPILER_GCC (only one of
them will occur at the same time)
libpayload's .xcompile target was moved later so that it can make use
of $(top)
Change-Id: I44001067f551cd0776dd303cbaeaa40eb3d5c1db
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10863
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The include breaks compilation on ARM with clang.
Change-Id: I1ce0d58dbcbb8785c23739670c8c9574c329a81c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10858
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This fixes issues with our clang reference toolchain on ARM.
Change-Id: Ib754941059285f15332bc694814aff6285969545
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10857
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
clang probing will pick up the first one that clang does not complain about
and right now that is armv7a-eabi, even though our toolchain builds for
armv7-a-eabi (and consecutively the build fails because there is no
armv7a-eabi-as)
Change-Id: I2594151150107f8e9c1aad33647dcb2f9878f953
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10830
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
One kilobyte of SRAM needs to be allocated and the feature enabled.
BRANCH=storm
BUG=chrome-os-partner:34161
TEST=timer error messages do not show up in the coreboot log any more
Change-Id: I1d5e5521bf9ae495d4f4f50ff017c846a8420719
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ffb9bfb0cdfab1391f8ae07669a2ab6b24d88dd7
Original-Change-Id: I60066672334db36f5e7adbef6794d7afd177d292
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/235893
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10847
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds support for the LZ4 decompression algorithm to
libpayload. It's what all the cool kids are using for decompression
these days and has many interesting advantages over LZMA (and everything
else I know of): blazing fast decompression (20(!) times faster than
LZMA, twice as fast as LZO on my Cortex-A72), no memory requirements on
decompression, and possibly in-place decompression support. It pays for
that with a lower compression ratio (about 50% larger compressed size
than LZMA, 10% larger than LZO for an ARM64 Linux kernel binary), but
the boot time math still works in its favor for our IO speeds.
This patch only adds the raw decompression functions for use by external
payloads, we can later try integrating them in CBFS. It copies the
decompression code itself unmodified from the upstream LZ4 library at
github.com/Cyan4973/lz4 which will hopefully make it easy to update. The
frame format parsing is reimplemented since the upstream version looks
unnecessarily complex and unreadable for our needs.
BRANCH=smaug
BUG=chrome-os-partner:32184
TEST=With other patches, booted ARM64 kernel that got compressed from
15M to 5.1M and decompresses in 44ms.
Change-Id: I65bdc4b2b19bd51c7b7e17a4e4b79da301a2a014
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f8a1fc996d5b0234d07f567fa8163d0f802d5144
Original-Change-Id: I15c0620da05561ade2552b15ffdf6bb3afd7eb26
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/282743
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10845
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=chrome-os-partner:42220
BRANCH=veyron
TEST=Used physical recovery button to enter dev mode on mickey
Change-Id: I78332f516b042be9c0cef6d8a59af44b670fc260
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4fcd79a133dc750dffd5d23e0b84a109e7b7cb8d
Original-Change-Id: I8d8dc0c0b98bbd194095d47047c8c5199ce17769
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/283546
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10844
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
HW team has suggested to set CAR2PMC_CPU_ACK_WIDTH to 0.
BUG=None
BRANCH=None
TEST=Tested on Smaug; still boot to kernel
Change-Id: I4d13a4048b73455b16da7a40c408c912fa97e4e7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8891a79e72af26d986af9e415149d4ca0aa6fedd
Original-Change-Id: I850a6756d7743993802fb85aad403e4cbef7a661
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282416
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10841
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I2C6 controller needs SOR_SAFE and DPAUX1 clocks to work. These 2 clocks
are mistakenly enabled by MBIST. MBIST fix will be submitted next, which
will disable these 2 clocks as initial states. Enable these 2 clocks now
so I2C6 will continue to work after MBIST fix.
BUG=None
BRANCH=None
TEST=Tested on Smaug, make sure that panel shows display
(I2C6 is used to turn on backlight)
Change-Id: Id47453e784d53fd6831e8d19a8d57c04c4e1f82f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 83e935f100be85e1e831a3f9f16962304f7cd7d6
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Change-Id: If312881c94570066bdc54f0f5c48226e862bddc6
Original-Reviewed-on: https://chromium-review.googlesource.com/282415
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10840
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Danger has a physical developer mode switch, it was just never
set up. This patch defines it, sets it up in fill_lb_gpios(),
and disables VIRTUAL_DEV_SWITCH.
Note: For now at least, dev mode is a bit wonky on Danger. It's
connected to both a DIP switch and a button. The button is normally
open, pulling dev mode high (defaulting to ON). The switch's "ON"
position will pull the value low, so we invert the value in coreboot
to see the expected behavior. Dev mode is enabled by holding the
button down during boot or by setting switch 2 in the DIP bank to
the ON position.
BUG=none
BRANCH=none
TEST=toggled dev switch on Danger and saw dev screen show up (or
not) as expected
Change-Id: I9369b96b6c9b54553d969b919ed663abdc704dd2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: dce53f1a31919f15f6e46c4a7d1c5ce541c2b318
Original-Change-Id: I737f165d7704e2f73375099367f012b365e3e77d
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/280852
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10839
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This can be a problem with freshly updated devices that are periodically
powered on while closed (as explained in the bug report).
In this case, just don't count down. In case of actual errors (where we
want the system to fall back to the old code), this now means that the
retries have to happen with the lid open.
Bump vboot's submodule revision for the vboot-side support of this.
BUG=chromium:446945
TEST=to test the OS update side, follow the test protocol in
https://code.google.com/p/chromium/issues/detail?id=446945#c43
With a servo, it can be sped up using the EC console interface to start
the closed system - no need to wait 60min and plugging in power to get
to that state.
Change-Id: I0e39aadc52195fe53ee4a29a828ed9a40d28f5e6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10851
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
-mno-red-zone is an option that pretty much every barebone software package
(eg. kernel, bootloader, ...) needs to use.
We weren't hurt by it yet, but make sure we won't in the future.
Change-Id: Ide5b63424ec1be5bf7bcade10540190b9871593b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10852
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change the FrameBufferSize field from UINT64 to UINT32 to match the
Platform Initialization 2.4 specification.
BRANCH=none
BUG=None
TEST=Build and run on cyan
Change-Id: I28dc0608675ed5840863ecd15bd2f57e6b2f4c1d
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10834
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Fix a cut and paste error in the warranty statement.
BRANCH=none
BUG=None
TEST=Build and run on cyan
Change-Id: If64b02f2c0fc2970932f23b99ad64beab5ab754e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10835
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
That way they don't need an initial 'make oldconfig' pass to
be useful again.
Change-Id: I3724fffab24b69478b8077f34e9d787555fd157b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10805
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
For almost all platforms the CFLAGS_<arch> specified in .xcompile
were overwritten by toolchain.inc, effectively breaking the build
in different places and in subtle ways.
Change-Id: I8e1db0eee7ca417ec56ed2156ae1b0b318e57e81
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10831
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This is needed to make those SOCs compile with timestamps enabled.
Change-Id: Iac20cb9911e1c76a18c8530385c9d7b8b46399e5
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10833
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
CLANG assumes that _Static_assert() is a C++11 only feature and
errs out when encountering the check_member macro complaining about
a reinterpret_cast.
Change-Id: Id8c6b47b4f5716e6184aec9e0bc4b0e1c7aaf17c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10827
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This is not going as far as I would like it to go, but
some of the external payloads have to be fixed up first.
Long term, I would like to directly add payloads/external/*
to subdirs-y and remove one layer of indirection from the
build process.
For now, moving the payload Makefile targets into payloads/
is already a small improvement.
Change-Id: Ie4eb492eb804e0aaaf1a4d90af2f876f27a32a75
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10829
Reviewed-by: Martin Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The integration of external payloads in coreboot
is a bit messy. You have to change the to level Kconfig
file for every payload (something that we recently fixed
for mainboards and chipsets). This means that updating
e.g. the SeaBIOS version requires a change outside of the
SeaBIOS directory.
With this patch you can create a new directory under
payloads/external and place a Kconfig and Kconfig.name
file in there, and the payload will automatically show
up when you do "make menuconfig".
Change-Id: I293abcb8eae581d4b3934e64897c0d339a27e7c1
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10828
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
No need to repeat this in the mainboard code (even if there's only one right
now).
Change-Id: Iaa3508c27f8c38cfa343ab1d8a094ce922dec157
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/10825
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
In order to accommodate tracking timestamps in all the
__PRE_RAM__ stages (bootblock, verstage, romstage, etc)
of a platform one needs to provide a way to specify
a persistent region of SRAM or cache-as-ram to store
the timestamps until cbmem comes online. Provide that
infrastructure.
Based on original patches from chromium.org:
Original-Change-Id: I4d78653c0595523eeeb02115423e7fecceea5e1e
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/223348
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Change-Id: Ie5ffda3112d626068bd1904afcc5a09bc4916d16
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/224024
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Change-Id: I8779526136e89ae61a6f177ce5c74a6530469ae1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10790
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Add a region TIMESTAMP to store all the timestamps starting from bootblock to
end of romstage. At the end of romstage take all the timestamps in TIMESTAMP
region and put it into cbmem
BUG=chrome-os-partner:32973
BRANCH=None
TEST=Compiles successfully and cbmem -t prints all timestamps
Original-Change-Id: I856564de80589bede660ca6bc1275193f8a2fa4b
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/223110
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit b8ccf5731df9ca149a2a0661362e7745515bfe5e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I266e46ed691ebe5f0a20ed28b89e6e74399487a1
Reviewed-on: http://review.coreboot.org/10736
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The top level Makefile runs the $stage-src .ld scripts through
the preprocessor and puts them in $(obj). Use the preprocessed
.ld files and cat them together into x86 romstage_null.ld.
Change-Id: If71240fbf7231df2b1333a1f8e5160cb8694f6ce
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10743
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
While extending the SMBIOS code to write a proper maximum structure size,
the call to elog_smbios_write_type15() was botched.
Fix the name and arguments.
Change-Id: I4c93490b09ddf4da240ff8f2bd8f8cc3f2abd96e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10823
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Fix up all the code that is using / to use >> for divisions instead.
Change-Id: I8a6deb0aa090e0df71d90a5509c911b295833cea
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10819
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On Windows systems, structs can be packed gcc style or ms style.
Make sure we use the same one (gcc style) in our user space tools
that we use in coreboot.
Change-Id: I7a9ea7368f77fba53206e953b4d5ca219ed4c12e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/10794
Tested-by: build bot (Jenkins)
On Windows systems the archetype printf defaults to ms_printf
instead of gnu_printf. Keep the archetype print for all non-
Windows compiles to not break compatibility with other systems
out there.
Change-Id: Iad8441f4dc814366176646f6a7a5df653fda4c15
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/10793
Tested-by: build bot (Jenkins)
The option --divide is required by our assembler to ensure that
'/' is not parsed as a comment sign but as a division, because
some of the cache as ram code is using divisions.
The --divide parameter has been part of the GNU as since binutils 2.17.
Hence, compile romstage (which contains cache as ram init) with
-Wa,--divide unconditionally instead of probing for it and adding it to
all compiler invocations (because that is causing random trouble with
clang when compiling the SMM code and calling gcc with --divide instead of
-Wa,--divide)
Change-Id: Ideefb2a243dc1d657ba415a99c1f8ab1d93800e0
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10817
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
BUG=chrome-os-partner:39603
BRANCH=none
TEST=Built OK for Smaug.
Change-Id: Iba170d8ad6f1dff111421fd61f71da19de57efaa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1bf1c1442dacf45bac5d55b05ada99a2c96f2e45
Original-Change-Id: Iecf04691a637b56e2f2287ab7d4d0cdda0382421
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282720
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Original-Reviewed-by: Mark Kuo <mkuo@nvidia.com>
Reviewed-on: http://review.coreboot.org/10814
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This value is overwritten in the next line.
Change-Id: I622c35b8d78f6b01f2532dd8b40db15b2e888f58
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10822
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Martin Roth