I2C1 was missing in the funit/i2c/addressmap tables/code.
BUG=none
BRANCH=none
TEST=Built Rush and Ryu. Built Rush w/code in mainboard.c
to enable I2C1 for the MAX98090 audio codec - codec could be
configured.
Change-Id: I0c678d21546eedb7404a1d3d4329da777430fc97
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4b623097a2adc4464c17bceed96ec3838beda985
Original-Change-Id: Ibe4f012fa2d427b95cd4672687132b47576b6a9a
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/229574
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9427
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The TPS65913 PMIC has an RTC built into it. This change adds
a driver for it which implements the new RTC API.
BUG=chrome-os-partner:33764
BRANCH=None
TEST=Compiles and boots to kernel prompt on ryu. Timestamps for event log
verified across multiple boots.
Change-Id: I49ec9b78afc53f1cbd4be09e448cdae6077fb710
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c16c11e620c830e7a73a2a24fe4823ccea0f3c39
Original-Change-Id: If1d549ea2361d0de6be75fd24b9e9810a6df7457
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/229414
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9425
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Provide support for SoCs to participate in PSCI commands.
There are 2 steps to a command:
1. prepare() - look at request and adjust state accordingly
2. commit() - take action on the command
The prepare() function is called with psci locks held while
the commit() function is called with the locks dropped.
No SoC implements the appropriate logic yet.
BUG=chrome-os-partner:32136
BRANCH=None
TEST=Booted PSCI kernel -- no SMP because cmd_prepare()
knowingly fails. Spintable kernel still brings up both
CPUs.
Change-Id: I2ae4d1c3f3eac4d1060c1b41472909933815d078
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 698d38b53bbc2bc043548792cea7219542b5fe6b
Original-Change-Id: I0821dc2ee8dc6bd1e8bc1c10f8b98b10e24fc97e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226485
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9423
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Newly turned on CPUs need a place to go bring its EL3
state inline with expectations. Plumb this path in for
CPUs turning on as well as waking up from a power down
state. Some of the infrastructure declarations were
moved around for easier consumption in ramstage and
secmon. Lastly, a psci_soc_init() is added to
inform the SoC of the CPU's entry point as well do
any initialization.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Built and booted. On entry point not actually utilized.
Change-Id: I2af424c2906df159f78ed5e0a26a6bc0ba2ba24f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: dbefec678a111e8b42acf2ae162c1ccdd7f9fd40
Original-Change-Id: I7b8c8c828ffb73752ca3ac1117cd895a5aa275d8
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228296
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9422
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Enable display only developer and recovery mode.
Will add in the actual display supporting functions in coming
patches.
BRANCH=none
BUG=chrome-os-partner:31936
TEST=build and test on ryu
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Change-Id: I0d312fd132dc310813432f4d8a28ad16c9bb36aa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: dd1bd56e83532c77d675f72b301b413cbcf3f489
Original-Change-Id: Idfa24d23c81baaedb944d2b9835255edad4e422b
Original-Reviewed-on: https://chromium-review.googlesource.com/226904
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Reviewed-on: http://review.coreboot.org/9421
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
1. Add page address, an i2c address, into register address table
2. Add pmic read function
3. Add more registers and setting values.
BRANCH=none
BUG=chrome-os-partner:31936
TEST=build and test on ryu
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Change-Id: Ieef0737205b20add3ff8990f62dd8585a4e8c557
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6dcf42c299e25023991be331b724acd0fd9f32c2
Original-Change-Id: I227b3e9390e6fc020707d4730c19945760df6ca2
Original-Reviewed-on: https://chromium-review.googlesource.com/226902
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Reviewed-on: http://review.coreboot.org/9420
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Take codec out of reset (GPIO_PH1 aka CODEC_RST_L) and enable LDO2
(GPIO_PR2/KB_ROW2 aka AUDIO_ENABLE). Muxes are setup and the two
GPIOs are set to output and driven high.
BUG=chrome-os-partner:32582
BRANCH=none
TEST=RealTek ALC5677 codec shows up in I2C6 scan at address 0x2D,
can read/write registers.
Change-Id: I236850452d401fd89b4f59eb03f132c0be32fb20
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4fe3b0c1a3f5d6264b83d7a7e2363dc3f3235cbf
Original-Change-Id: Iedce7bb9f8e61d3b8cd693fc5e567323d89f8046
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/228920
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9419
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Proto 0,1,2 boards had pwr btn active high. Proto 3 onwards boards will have pwr
btn active low. Thus, select power btn polarity based on board id.
BUG=chrome-os-partner:33545
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt on ryu proto 1.
Change-Id: I9b06b10358b91d40cfdb418ef8cf4da1ae833121
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7100a42b53a09ed4cb298f88d6f804f46fecacb5
Original-Change-Id: Icdf51b9324385de00f5787e81018518c5397215f
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/229011
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9418
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Switched to CRC 16 as it's 40% faster than CRC x25.
Both CRC 16 and CRC x25 are supported and either can be selected through
define directives.
BUG=chrome-os-partner:31438
TEST=built urara bootblock and verified content of bootblock.bin, observed
expected content; ran it on Pistachio FPGA and observed that its
content is read properly by bootrom.
BRANCH=none
Change-Id: I36dec6ec2d6616343f97cc8b6486c0a3e4ea49ba
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6d9318097ca9270bc245e7de4aff5f78dfbc1606
Original-Change-Id: If1a78350e0b48d91bfe64ead45f852f44ba3cf9a
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/226840
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9415
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Since gpio.c is more generic now and will be used in various
stages (ie for board_id()), compile it for all stages.
BUG=none
BRANCH=none
TEST=compiled for peppy and veyron_pinky
Change-Id: Ib5c73f68db92791dd6b42369f681f9159b7e1c22
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ef4e40ccf6510d63c4a54451bdfea8da695e387e
Original-Change-Id: I77ec56a77e75e602e8b9406524d36a8f69ce9128
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228325
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9414
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
This deprecates TERTIARY_BOARD_ID. Instead, a board will set
BOARD_ID_SUPPORT (the ones affected already do) which will set
GENERIC_GPIO_SUPPORT and compile the generic GPIO library.
The user is expected to handle the details of how the ID is encoded.
BUG=none
BRANCH=none
TEST=Compiled for peppy, nyan*, storm, and pinky
Change-Id: Iaf1cac6e90b6c931100e9d1b6735684fac86b8a8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 93db63f419f596160ce2459eb70b3218cc83c09e
Original-Change-Id: I687877e5bb89679d0133bed24e2480216c384a1c
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228322
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9413
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This adds gpio_base2_value() which reads an array of 2-state
GPIOs and returns a base-2 value, where gpio[0] represents the
least significant bit.
BUG=none
BRANCH=none
TEST=tested with follow-up patches for pinky
Change-Id: I0d6bfac369da0d68079a38de0988c7b59d269a97
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 27873b7a9ea237d13f0cbafd10033a8d0f821cbe
Original-Change-Id: Ia7ffc16eb60e93413c0812573b9cf0999b92828e
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228323
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9412
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This patch makes a few cosmetic changes:
- Rename tristate_gpios.c to gpio.c since it will soon be used for
binary GPIOs as well.
- Rename gpio_get_tristates() to gpio_base3_value() - The binary
version will be called gpio_base2_value().
- Updates call sites.
- Change the variable name "id" to something more generic.
BUG=none
BRANCH=none
TEST=compiled for veyron_pinky and storm
Change-Id: Iab7e32f4e9d70853f782695cfe6842accff1df64
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c47d0f33ea1a6e9515211b834009cf47a171953f
Original-Change-Id: I36d88c67cb118efd1730278691dc3e4ecb6055ee
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228324
Reviewed-on: http://review.coreboot.org/9411
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Our CBFS header offset on rk3288 was very low and overlapped with the
end of the bootblock on recent Pinky builds. This can create all kinds
of fun effects like BSS variables suddenly being initialized to
something else than zero, in an effect that jumps somewhere else for
every slightest code size change.
This patch moves the CBFS header offset up a bit and the CBFS ROM offset
down (because there's really no point in leaving such a large gap). This
resolves our immediate booting problems, and I'll also start on a patch
to add further checks somewhere that catch these overlaps in the future.
BRANCH=None
BUG=None
TEST=Created a Pinky image from the exact same commit version as the
official 6443.0.0 build, with a KERNELREVISION string of the exact same
length as the builder (which for some arcane reason is different than
running emerge locally, shifting the whole bootblock around with it).
Confirmed that I saw the same "Not enough room for another
sub-pagetable!" hang, and that this patch fixes it.
Change-Id: I9e59a282b3cd0af3b0d224d64c10b7c4d312ad02
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1a142cd2c51c6f51a1597c21ad513feb151e0938
Original-Change-Id: I8be5b7b7e87021cc1b3a91d336e8d233546ee188
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228326
Original-Reviewed-by: Gediminas Ramanauskas <gedis@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9410
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Since the LAST_THSUT bit is uncertain value when it cold-reboot,
we remove the printout about this status bit in coreboot.
BUG=chrome-os-partner:33521
TEST=Boot on veyron_pinky rev2
Change-Id: I3b9791ffdffeff0721e3d86378db6255c5abc9ea
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 16464d3229ad1001952ef1b50fe3e606d1583462
Original-Change-Id: I258750797e32c28f86e73a01eede005e890a6906
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/228391
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9409
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
slowly raise to max cpu voltage to prevent overshoot,
and in our experience,when cpu run in 1.8GHz,the
vdd_cpu must up to 1.4V
BUG=chrome-os-partner:32716, chrome-os-partner:31896
TEST=Boot on veyron_pinky rev2,check the rk808 buck1 voltage 1400mv
and measure the overshoot is 1440mv
Change-Id: I759840bd8cf57a5589bf1862d04803f80f804164
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 567f616ff091883ed3275b407859c9399db981b2
Original-Change-Id: I9bb739b49ae4b4f7a60133fa38b0fe51b95c0d78
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/226753
Original-Reviewed-by: Doug Anderson <dianders@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9408
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There are changes in upcoming board revs that need to take
different action depending on board revision. Update the
enumeration to reflect upcoming reality.
BUG=chrome-os-partner:33578
BRANCH=None
TEST=Built and booted.
Change-Id: Ib51393e04d3255bbd44e5d77a2a7903109beebf4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: de8d629678c0ae17af9f7145e04d95f43c927ee0
Original-Change-Id: I64cdeab806e7a665051f1d47bbf044413f7a1196
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227681
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9407
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The gpio_get_tristates() function prints out the values
observed while processing the GPIOs. Additionally, the
values for the normalization were completely consecutive.
Therefore, this indirection can be removed.
BUG=chrome-os-partner:33578
BRANCH=None
TEST=Built and booted.
Change-Id: I088a2f1c7601c014a7f8a9eb228efa9bb80f1e01
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 02e52554b9cbf85034feb9aedc50f09b70893e32
Original-Change-Id: I17d85891087e3128790329a5f05cbdab4cbc950e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227680
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9406
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Add the Whirlwind board ID to the enum
- Replace comparisons of the board ID with 0 to the proto0 constant
TEST=Booted Storm with this coreboot version
BUG=none
BRANCH=none
Change-Id: I53be0b06c3444936a8bd67653e03b93bcb87e328
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7e055ef27ef1e07be09d80b2298384889214bf0d
Original-Change-Id: I75c7c98732c3d4569611de54d7aa149dd3b0fb7d
Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225460
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9404
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The new API allows to find VPD objects in the VPD cache. There is no
need for the caller to allocate or free the per object memory.
The existing API (cros_vpd_gets) now uses the new function as well.
BRANCH=storm
BUG=chrome-os-partner:32611
TEST=verified that MAC addresses still show up in the device tree on
the booted storm device
Change-Id: Id06be315981cdaa2285fc1ec61b96b62b1178a4b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 99a34344448a5521cee8ad3918aefb1fde28417d
Original-Change-Id: I6c0b11bb844d6235930124d642da632319142d88
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225258
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/9403
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch runs basic NAND initialization code on Proto 0.2 boards which
have been reworked for NAND. It makes sense to do this in coreboot for
two reasons:
- In general, it is reasonable for coreboot to initialize clocks and such
in preparation for depthcharge's use. Waiting times can be pooled, and
the initialization itself here is very fast.
- There is a kernel bug which requires that the clock is already initialized
before the kernel loads NAND support. coreboot is a more sensible place
to put a workaround than depthcharge because depthcharge initializes
things lazily, but when booting from USB, depthcharge won't need to look
at NAND.
This change involves bringing in an additional header file, ebi2.h, from U-Boot.
TEST=Booted a kernel from USB and verified that NAND came up without any
depthcharge hacks, whereas previously a USB-booted kernel would be unable
to access NAND even with the same drivers compiled in due to an initialization
failure.
BUG=chromium:403432
BRANCH=none
Change-Id: I04e99cb39d16848a6ed75fe0229b8f79bdf2e035
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9be29da5ccad9982f146ae00344f30598ef2371c
Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Original-Change-Id: I1760ecb4e47438311d80e34326e45578c608481c
Original-Reviewed-on: https://chromium-review.googlesource.com/225277
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9402
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The function to read board IDs from tristate GPIOs currently supports
two output modes: a normal base-3 integer, or a custom format where
every two bits represent one tristate pin. Each board decides which
representation to use on its own, which is inconsistent and provides
another possible gotcha to trip over when reading unfamiliar code.
The two-bits-per-pin format creates the additional problem that a
complete list of IDs (such as some boards use to build board-ID tables)
necessarily has "holes" in them (since 0b11 does not correspond to a
possible pin state), which makes them extremely tricky to write, read
and expand. It's also very unintuitive in my opinion, although it was
intended to make it easier to read individual pin states from a hex
representation.
This patch switches all boards over to base-3 and removes the other
format to improve consistency. The tristate reading function will just
print the pin states as they are read to make it easier to debug them,
and we add a new BASE3() macro that can generate ternary numbers from
pin states. Also change the order of all static initializers of board ID
pin lists to write the most significant bit first, hoping that this can
help clear up confusion about the endianness of the pins.
CQ-DEPEND=CL:219902
BUG=None
TEST=Booted on a Nyan_Blaze (with board ID 1, unfortunately the only one
I have). Compiled on Daisy, Peach_Pit, Nyan, Nyan_Big, Nyan_Blaze, Rush,
Rush_Ryu, Storm, Veryon_Pinky and Falco for good measure.
Change-Id: I3ce5a0829f260db7d7df77e6788c2c6d13901b8f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2fa9545ac431c9af111ee4444d593ee4cf49554d
Original-Change-Id: I6133cdaf01ed6590ae07e88d9e85a33dc013211a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219901
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9401
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We've had gpiolib.h which defines a few common GPIO access functions for
a while, but it wasn't really complete. This patch adds the missing
gpio_output() function, and also renames the unwieldy
gpio_get_in_value() and gpio_set_out_value() to the much easier to
handle gpio_get() and gpio_set(). The header is renamed to the simpler
gpio.h while we're at it (there was never really anything "lib" about
it, and it was presumably just chosen due to the IPQ806x include/
conflict problem that is now resolved).
It also moves the definition of gpio_t into SoC-specific code, so that
different implementations are free to encode their platform-specific
GPIO parameters in those 4 bytes in the most convenient way (such as the
rk3288 with a bitfield struct). Every SoC intending to use this common
API should supply a <soc/gpio.h> that typedefs gpio_t to a type at most
4 bytes in length. Files accessing the API only need to include <gpio.h>
which may pull in additional things (like a gpio_t creation macro) from
<soc/gpio.h> on its own.
For now the API is still only used on non-x86 SoCs. Whether it makes
sense to expand it to x86 as well should be separately evaluated at a
later point (by someone who understands those systems better). Also,
Exynos retains its old, incompatible GPIO API even though it would be a
prime candidate, because it's currently just not worth the effort.
BUG=None
TEST=Compiled on Daisy, Peach_Pit, Nyan_Blaze, Rush_Ryu, Storm and
Veyron_Pinky.
Change-Id: Ieee77373c2bd13d07ece26fa7f8b08be324842fe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9e04902ada56b929e3829f2c3b4aeb618682096e
Original-Change-Id: I6c1e7d1e154d9b02288aabedb397e21e1aadfa15
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220975
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9400
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Retrieving MAC address from VPD should be the board responsibility,
add a call to the recently introduced function.
BRANCH=storm
BUG=chromium:417117
TEST=verified that MAC addresses still show up in the device tree on
storm
Change-Id: Ib8ddc88ccd859e0b36e65aaaeb5c9473077c8c02
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 285cb256e619ef41c7f11680b3fa5310b1d93cf1
Original-Change-Id: I3913b10a425d8e8621b832567871ed4861756381
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223797
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9399
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Retrieval of the MAC address from the VPD is a Chrome OS specific
feature, required just on one platform so far. There is no need to
look for the MAC address in the VPD on all other Chrome OS boards.
BRANCH=storm
BUG=chromium:417117
TEST=with the upcoming patch applied verified that MAC addresses still
show up in the device tree on storm
Change-Id: If5fd4895bffc758563df7d21f38995f0c8594330
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fb4906ac559634321a01b4814f338611b9e98b2b
Original-Change-Id: I8e6f8dc38294d3ab11965931be575360fd12b2fc
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223796
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9398
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of relying on CONFIG_MAX_CPUS to be the number of
CPUs running a platform pass the number of online cpus
from coreboot secmon. That allows for actually enabled
CPUs < CONFIG_MAX_CPUS.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Booted SMP kernel.
Change-Id: Iaf1591e77fcb5ccf5fe271b6c84ea8866e19c59d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3827af876c247fc42cd6be5dd67f8517457b36e7
Original-Change-Id: Ice10b8ab45bb1190a42678e67776846eec4eb79a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227529
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9397
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The struct cpu_action already tracks entry/arg pointers. Use that
instead of duplicating the same information.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Built and booted.
Change-Id: I70e1b471ca15eac2ea4e6ca3dab7d8dc2774a241
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cdddfd8d74d227cb5cbdf15b6871480839fa20d8
Original-Change-Id: I4070ef0df19bb1141a1a47c4570a894928d6a5a4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227549
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9396
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The current implementation of secmon assumes just entry/arg
are passed to secmon for starting up a CPU. That's lacking
in flexibility. Therefore change secmon_params to contain
both the BSP and secondary CPUs' entry/arg information.
That way more information can be added to secmon_params when
needed.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Built and booted SMP kernel using PSCI and spin table.
Change-Id: I84c478ccefdfa4580fcc078a2491f49f86a9757a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c5fb5bd857a4318174f5b9b48e28406e60a466f8
Original-Change-Id: Iafb82d5cabc806b6625799a6b3dff8d77bdb27e9
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227548
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9395
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There is state within the system that relies on having
all CPUs present in order to proceed with initialization.
The current expectation is that all CPUs are online and
entering the secure monitor. Therefore, wait until all
CONFIG_MAX_CPUs show up.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Can get all CPUs up in kernel using PSCI.
Change-Id: I741a09128e99e0cb0c9f4046b1c0d27582fda963
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 030535b7c9821b40bf4a51f88e289eab8af9aa13
Original-Change-Id: Ia0f744c93766efc694b522ab0af9aedf7329ac43
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227547
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9394
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is a script we have been using to rewrite commit messages when
upstreaming coreboot patches from the Chromium OS tree into coreboot
upstream.
Change-Id: I5442279c099dafe55cc97ccf09ee2bc2df4eca5f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/9299
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We have two drivers for a 100%-identical peripheral right now, mostly
because we couldn't come up with a good common name for it back when we
checked it in. That seems like a pretty silly reason in the long run.
Both Tegra and Rockchip SoCs contain UARTs that use the common 8250
register interface (at least for the very basic byte-per-byte transmit
and receive parts we care about), memory-mapped with a 32-bit register
stride. This patch combines them to a single 8250_mmio32 driver (which
also fixes a problem when booting Rockchip without serial enabled, since
that driver forgot to check for serial initialization when registering
its console drivers). The register accesses are done using readl/writel
(as Rockchip did before), since the registers are documented as 32-bit
length (with top 24 bits RAZ/WI), although the Tegra SoC doesn't enforce
APB accesses to have the full word length. Also fixed checkpatch stuff.
A day may come when we can also merge this driver into the (completely
different, with more complicated features and #ifdefs) 8250 driver for
x86 (which has MMIO support for 8-bit register stride only), both here
and in coreboot. But it is not this day. This day I just want to get rid
of a 99% identical file without expending too much effort.
BUG=None
TEST=Booted on Veyron_Pinky and Nyan_Blaze with and without serial
enabled, both worked fine (although Veyron has another kernel issue).
Change-Id: I85c004a75cc5aa7cb40098002d3e00a62c1c5f2d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e7959c19356d2922aa414866016540ad9ee2ffa8
Original-Change-Id: Ib84d00f52ff2c48398c75f77f6a245e658ffdeb9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225102
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9387
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
this change sets the stack pointer to the value specified in
memlayout.ld before jumping to the bootblock.
BUG=none
BRANCH=ToT
TEST=Built cosmos and all other current boards.
Change-Id: Ic1b790f27bce431124ba70cc2d3d3607c537564b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d50fd02db8bf10147fd808f3030e6297b9ca0aad
Original-Change-Id: I4bb8cea7435d2a0e2c1ced050c3366d2e636cb8a
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225420
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9384
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
this adds an entry point jumping to main for the bootblock.
BUG=None
BRANCH=ToT
TEST=Built coreboot for cosmos
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I1c9ea6ba63a1058e09613d969fe00308260037be
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 662d0083f25008b55b9bc5fbce9e30e6b80c2c65
Original-Change-Id: I74f2f5e3b3961ab54a7913e6b3a3ab0e6fd813a3
Original-Reviewed-on: https://chromium-review.googlesource.com/225205
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9382
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We have another stage which we need to test for. Not a problem
right now, because it always matches either bootblock or romstage,
but future proof the test.
Change-Id: Id0a16d9bc1270516f2c00f9f8fd049420c9ba354
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9380
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Don't attempt to scan the PCI bus if the bridge is disabled. When
the PCI bridge is not setup and enabled, it is possible for the
secondary bus register to contain the value zero (0). In this case
the usb_scan_pci_bus routine gets into an infinite recursive loop
which ends only when the heap or stack is exhausted. This patch
verifies that the PCI bridge is enabled by verifying that it is
enabled for either memory or I/O operations. When enabled, the
secondary bus is scanned.
BRANCH=none
BUG=None
TEST=Build and run on Samus
Change-Id: I6826dc1d73b7c24729de5ac7c4d3534922ca73c5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 63d04b47934761351b54c847a2692bdef81ce54f
Original-Change-Id: I855240c52fa3eba841e6754816ebbcb824abc4cd
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/236382
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/8734
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use 'DEVICE_NOOP' macro introduced in:
commit 530355d include/device/device.h: Provide DEVICE_NOOP macro shim
to provide formalism. Make the null device ops here explicit and
in-line with formalism elsewhere.
Change-Id: I2400b29a5108a6bae21959177e53321810ca1407
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8035
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This patch aligns bg4cd to the new SoC header include scheme.
Also alphabetized headers in affected files since we touch them anyway.
BUG=None
TEST=Tested with whole series. Compiled Cosmos.
Change-Id: I32a4407f7deb2b1752b6220a140352724f320637
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0b6bb6990417863010258632374c3f5ac19350c9
Original-Change-Id: Ia5299659ad186f2e7d698adfa7562396e747473f
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224506
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9358
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The SOC code should include the SPI controller driver when configured.
Enable SPI support for cosmos.
BRANCH=none
BUG=chrome-os-partner:32631
TEST=cosmos builds
Change-Id: I8212f191b7d80f0bee86f746813edaf8e5ee6db1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fd4853be5157247bb73fc22b9d4f8300228fe6ce
Original-Change-Id: If7e12e2fb04e63c36d9696d13e08397b91a77a8c
Original-Commit-Id: 7b1d095e5df6a864d3564bbf7a20cc211f75629a
Original-Change-Id: If9dd80cb96120d34a0865f7882cd62e45fed749d
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223750
Original-Reviewed-on: https://chromium-review.googlesource.com/223752
Reviewed-on: http://review.coreboot.org/9356
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The arch_run_on_all_cpus[_async]() APIs can run the BSP before
the APs if the BSP's id is less than the APs' ids. Fix this by
ensuring we run the necessary callback on all but self.
BUG=chrome-os-partner:33532
BRANCH=None
TEST=Booted spin table kernel. All CPUs are up.
Change-Id: Ic9a466c3642595bad06cac83647de81873b8353e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 575437354cc20eeac8015a0f7b0c9999ecb0deee
Original-Change-Id: I87e944f870105dbde33b5460660c96c93c3cdf93
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227488
Original-Tested-by: David Riley <davidriley@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9392
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Need to configure debug uart port to have proper baudrate/width/parity.
Hard-code it to 115200n8.
BUG=chrome-os-partner:32015
BRANCH=None
TEST=successfully suspend/resume on Rush/Ryu
Change-Id: I502fd8361baf2bea642fabbc4d5e126da5411ba3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8c70625ad41efca9117c8682113b226e929e93c5
Original-Change-Id: I6a96c80654ce52f5b877fd46995ca8c1aceb7017
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/226407
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9391
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tom Warren