Paging code is tricky and figuring out what is wrong with it can be a
pain. This patch tries to ease the burden by giving a little more
information for prefetch and data aborts, dumping the Instruction Fault
Address Register (IFAR), Instruction Fault Status Register (IFSR) and
Auxiliary Instruction Fault Status Register (AIFSR) or the respective
Data registers. These contain additional information about the cause of
the abort (internal/external, write or read, fault subtype, etc.) and
the faulting address.
BUG=None
TEST=I have read through enough imprecise asynchronous external abort
reports with this patch that I learned the bit pattern by heart.
Change-Id: If1850c4a6df29b1195714ed0bdf025e51220e8ab
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bf3b4924121825a5ceef7e5c14b7b307d01f8e9c
Original-Change-Id: I56a0557d4257f40b5b30c559c84eaf9b9f729099
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223784
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9345
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of forcing boards to have DMA region below 4GiB, provide
Kconfig option DMA_LIM_EXCL that a board can use to set the upper
limit in MiB units on the address range reserved by DMA. By default,
this value is 0x1000 i.e. 4GiB limit on the DMA upper address.
BUG=None
BRANCH=None
TEST=Compiles successfully for rush. Default value is seen as 0x1000.
Change-Id: Ie35d3844a0989486ae022f8922fdd4c9d7d57fb4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6716cf312a103bc0440a558fc43c8c77869816e3
Original-Change-Id: I3ecbb4ec90995ab1568cb0924d5ce9467492697d
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/245250
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8800
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The raw_write_sctlr_current() cannot be used in mmu_disable() because
it pushes some registers to cached stack, and then just after cache
disabled, the value was gone.
BRANCH=none
BUG=none
TEST=build and boot on mt8173-evb
Change-Id: I512405b7917f27d16bdd3c51d9459827ad714e67
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aafe64922cc4cd01ecb099db106d04538e3e57ff
Original-Change-Id: I0dda8518d14c46fae1fe76e3629bd4ee81c1e0ee
Original-Signed-off-by: HC Yen <hc.yen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/240323
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8799
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Allow read/write to registers at a given el. Also, make read/write
registers at current el call this newly added function.
BRANCH=none
BUG=none
TEST=build and boot on mt8173-evb
Change-Id: Id69f0fdc07193c5c7e997712f0cd99de6f41510b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c091917babc39d9ab997f51f81b486c9aa900c24
Original-Change-Id: I0944946642066b88331e497a92388e74e86902d0
Original-Signed-off-by: HC Yen <hc.yen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/240322
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8798
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The framebuffer structure lives in the coreboot tables. Those
tables have a checksum calculation applied over all the entries.
Therefore, one shouldnot be modifying fields within the coreboot
table entries because the calculated checksum would be wrong.
BRANCH=none
BUG=chrome-os-partner:31936
TEST=On ryu, confirmed dev screen still works as well as cbmem utility
once booted.
Change-Id: I93830a8efe98aa848f2b0f8388688de0e93b2f82
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6026ca5ad0254c14c30412882dc63550656c7d16
Original-Change-Id: Ic9c164ded03d10d6f6f3ce15e9b38b1f6ce61a91
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/230471
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8797
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Allocate noncacheable memory for frame buffer and save base
address to sys_libinfo.
BRANCH=none
BUG=chrome-os-partner:31936
TEST=build and test on ryu
Change-Id: I19a8079616376dc7c1a8ecdbd7499c2553b8c6c3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cebb5650167264902548339bb1a2b428f3b7f4ed
Original-Change-Id: I7bfbfefb92001632ce3d572a50e46188795c4ab8
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/226404
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8796
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is important since mmu is disabled during the post_sysinfo_mmu_setup call
and calling printf can cause unaligned access.
BUG=None
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt with console_init
Change-Id: I5ef72ee449fdcf30186f97485cc532d6c56b2c5d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 688ef3856d0502d057c9543ee7763601156e6385
Original-Change-Id: Ie376e394d084edd6c999fc9edde79f15a0264e7b
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/222664
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8795
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Provide a function to obtain a new memrange with requested properties (type,
size, alignment, max_addr and other restrictions) from the set of available
memranges passed in coreboot table. One user of this function would be getting
memrange for dma, another one would be framebuffer.
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt
Change-Id: Ic5a63ca2dca6c71f4ca2d77e2e2c8180d32a38e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3cd75756e1405e044c029f2878bfcc9c8c962bdf
Original-Change-Id: I187d73a4d55d3c6f49afbe9852901672d25de8dc
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/222110
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8794
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
1. keep functions and objects used entirely within mmu.c as static.
2. DMA region finding needs to terminate. Therefore, the next address
to be attempted needs to be less then the current end address.
3. Ensure mmu_ranges passed to mmu_init_ranges_from_sysinfo() has
0 entries marked as used.
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Booted ryu with RAM hole above cbmem tables below 4GiB.
Change-Id: I71a9cb89466978aa63fca5d8bee97b8af75ea206
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 66518fd86e676bbddf52e9d9afdd76d72c8e2222
Original-Change-Id: I5cb4e5009359cb04c4e1b5fe60845f80fbdff02c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221725
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8793
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
What this change does:
1) Initialize limited page tables as soon as we jump into libpayload. Basically
two ranges are initialized. One is for the BASE_ADDRESS and other is for the
coreboot_tables. With page tables initialized and MMU enabled, we jump into
code to parse coreboot tables.
2) Once coreboot tables are parsed and we have complete picture of the memory,
we perform a complete page table initialzation and enable MMU and then jump to
payload.
Additionally, we also:
1) Initialize DMA memory on our own depending upon the memory map. It ensures
that the DMA buffer is placed in 32-bit memory.
CQ-DEPEND=CL:216826
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully and we are able to start execution of libpayload in
EL2 and reach kernel login prompt
Change-Id: I8a6203e465868bc2a3e5cc377e108f36cc58e2fa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7695bb7afe34ea460282125a0be440e8994b01e4
Original-Change-Id: Ie0f47b7759d4ac65a6920f7f2f7502b889afda6d
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216824
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8792
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Adds support for initializing mmu, setting up dma areas and enabling mmu based
on the memranges passed on in the coreboot tables.
CQ-DEPEND=CL:216826
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully
Change-Id: Id41a4255f1cd45a9455840f1eaa53503bd6fef3f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f2c6676bf51fcd85b61e9e08a261634a78137c4c
Original-Change-Id: I217bc5a5aff6a1fc0809c769822d820316d5c434
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216823
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8791
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Libpayload should be able to setup its own dma areas and not depend on coreboot
tables for passing this information. This patch and next allow libpayload to
setup dma areas while performing mmu_init
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully and dma areas are setup properly with the mmu init patch
Change-Id: I5f6fd19a957c7626a2bbe6b826c8987e64ed248f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4f3552b8d3439a8b12d1e0b15ef67dcb14b8c96a
Original-Change-Id: I44d9f394fa349abd7182c4ba10f1eaefd6e4fdaa
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216822
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8789
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
By default we dont want to use the special DC instruction. Thus getting rid of
the DONT_USE_DC macro and enabling code appropriately in memset.S
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully and memset works fine for mmu init
Change-Id: Icb3193f4f0d122726dcdacbdcacbf53eba30e235
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 54f639ef2348acab54e32b18f6826a67bf52bc14
Original-Change-Id: Id89ec2c1731d21496eca617a3c03abaf48062908
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216820
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8787
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Allow more flexibility by reading and writing to system registers at current
EL. Instead of specifying what _ELx register to write to, code can specify
_current.
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles and boots to kernel on ryu
Change-Id: Id38b675bfe67ca1e25f8c268192114e3f0bee800
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6d4d07e26fc964dc3aaebfe03db59596d90093e9
Original-Change-Id: Ic1d9e18e6fc016a04f17621a148e62d6cbd04ce7
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214577
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8785
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add library helpers to access standard arm64 registers. This library also
provides functions to directly read/write register based on current el. So, rest
of the code doesnt need to keep checking the el and call appropriate function
based on that.
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Libpayload and depthcharge compile successfully for ryu
Change-Id: Ibc0ca49f158362d4b7ab2045bf0fbd58ada79360
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2ca6da580cb51b4c23abdaf04fee2785e5780510
Original-Change-Id: I9b63e04aa26a98bbeb34fdef634776d49454ca8d
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214575
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8784
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=chrome-os-partner:31438
TEST=tested on Pistachio FPGA and bring up board; works as
expected
BRANCH=none
Change-Id: I368494f388b82969dda0ce73a38824791efce616
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e4c2bbcbdbcf706062724cffe2d5f15953468ace
Original-Change-Id: Id5c9b1d65c6ec87f2aba06995dc940c50afb041f
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/245386
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8746
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add CPU frequency corresponding to SOC.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; behaves as expected.
BRANCH=none
Change-Id: I05458070a15c6cf1ef0fc2104715a63902a38887
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4afe332bcc41afeb7e31e918e345c3336f7dc604
Original-Change-Id: I55b788faf7984bafc2509cac69867a772c7cb863
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241427
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8853
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The default string functions work with multiple of 4 bytes
(sizeof(unsinged long)); MIPS will use LW/SW instructions
for these operations and if the source and destination
addresses are not aligned it will trigger an exception.
Therefore, this implementation does all data access operations
per byte, because there is no guarantee that the provided
strings are properly aligned.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; behaves as expected
BRANCH=none
Change-Id: I05b43673deb954f022d12cb9c3d7baac26be2a34
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8e13b3d31726404abd8c8e5c8780d3d3e16e032d
Original-Change-Id: I456e312eb6b7fee2eff10e461af7f578aed07648
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241885
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add the basic build infrastructure and architectural support
required to build for targets using the MIPS architecture.
This will require the addition of cache maintenance.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio FPGA with Depthcharge as payload;
successfully executed payload.
BRANCH=none
Change-Id: I75cfd0536860b6d84b53a567940fe6668d9b2cbb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 758c8cb9a6846e6ca32be409ec5f7a888ac9c888
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Change-Id: I0b9af983bf5032335a519ce2510a0b3aca082edf
Original-Reviewed-on: https://chromium-review.googlesource.com/219740
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8741
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It turns out that CB_TAG_ACPI_GNVS is handled in both x86 specific and
common coreboot table parsing code. The MRC cache case used only by
x86 is handled in the common code.
This patch restores sanity and moves processing to where it belongs.
BRANCH=none
BUG=none
TEST=verified that arm and x86 targets build.
Change-Id: Iaddaa3380725be6d08a51a96c68b70522531bafe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0afae893d5027026cb666cd46e054aeae4e71f83
Original-Change-Id: I2c114a8469455002c51593cb8be80585925969a7
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225457
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8752
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There are three instances of coreboot.c in libpayload. for x86, arm
and arm64 architectures. The arm and arm64 instances are exactly the
same. The differences with the x86 instance are as follows:
- a very slightly different set of coreboot table tags is parsed (one
tag added and two removed)
- instead of checking a fixed address if it contains the coreboot
table, the x86 version iterates over two address ranges.
This patch refactors the module, leaving architecture specific
processing in arch subdirectories and moving the common code into
libc.
BUG=none
TEST=none yet
Change-Id: I1c7ad6f74e3498e93df78086ba0ff708c08e0a5c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3df209d58ebd5c5b1cf0168f6466e065d1ef3598
Original-Change-Id: I6dfed73f6ba5939f692d0f98d2774c0e0312a25f
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210770
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8750
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Make board ID value supplied in the coreboot table available to the
bootloader on all three architectures.
BUG=chrome-os-partner:30489
TEST=none yet
Change-Id: I6c2d39e94212b55650929d7d99896581d23f789d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 723e4a600a5d3a03e960169b04f8322f6dd2486b
Original-Change-Id: I7847bd9fe2d000a29c7ae95144f4868d926fb198
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210430
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8730
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add stub implementation for gdb arm64 support. Currently all functions are kept
empty to enable proper compilation of depthcharge and libpayload. As we get more
clear about context management and stuff, we can add details for gdb as well.
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: I0a8729671ab0764d424c0e3d50af86433d05b1e8
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204877
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit d24e5c26b56a9882b3450b1e4988b56c3d73efd1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9b7d3d7060dd827ef4a46865e0f9a2b4e063d07d
Reviewed-on: http://review.coreboot.org/8125
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds the ability to attach a GDB host through the UART to a
running payload. Libpayload implements a small stub that can parse and
respond to the GDB remote protocol and provide the required primitives
(reading/writing registers/memory, etc.) to allow GDB to control
execution.
The goal of this implementation is to be as small and uninvasive as
possible. It implements only the minimum amount of primitives required,
and relies on GDB's impressive workaround capabilities (such as
emulating breakpoints by temporarily replacing instructions) for the
more complicated features. This way, a relatively tiny amount of code on
the firmware side opens a vast range of capabilities to the user, not
just in debugging but also in remote-controlling the firmware to change
its behavior (e.g. through GDBs ability to modify variables and call
functions).
By default, a system with the REMOTEGDB Kconfig will only trap into GDB
when executing halt() (including the calls from die_if(), assert(), and
exception handlers). In addition, payloads can manually call gdb_enter()
if desired. It will print a final "Ready for GDB connection." on the
serial, detach the normal serial output driver and wait for the commands
that GDB starts sending on attach.
Based on original implementation by Gabe Black <gabeblack@chromium.org>.
BUG=chrome-os-partner:18390
TEST=Boot a GDB enabled image in recovery mode (or get it to hit a
halt()), close your terminal, execute '<toolchain>-gdb --symbols
/build/<board>/firmware/depthcharge_gdb/depthcharge.elf --directory
~/trunk/src/third_party/coreboot/payloads/libpayload --directory
~/trunk/src/platform/depthcharge --directory
~/trunk/src/platform/vboot_reference --ex "target remote
<cpu_uart_pty>"' and behold the magic.
(You can also SIGSTOP your terminal's parent shell and the terminal
itself, and SIGCONT them in reverse order after GDB exits. More
convenient wrapper tools to do all this automatically coming soon.)
Original-Change-Id: Ib440d1804126cdfdac4a8801f5015b4487e25269
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202563
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 9c4a642c7be2faf122fef39bdfaddd64aec68b77)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9238b4eb19d3ab2c98e4e1c5946cd7d252ca3c3b
Reviewed-on: http://review.coreboot.org/8119
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There have been leaks of GPL code into libpayload for a while now, for
new features or improvements that require third party code with no
adequate alternative among BSD-licensed software. It seems silly and
counter-productive to keep holding back features and performance
improvements from libpayload for a use-case (proprietary payloads) that
doesn't even seem to be implemented anywhere to date. Open-source
payloads should not need to suffer to appease commercial ones.
Instead, this patch introduces a new Kconfig option to explicitly allow
inclusion of GPL code. It will use Kconfig dependencies and/or Makefile
rules to ensure that no GPL code can end up in the final payload if that
option is unset, allowing proprietary payloads to keep working with the
existing BSD-licensed feature set. New features and patches (that are
sufficiently separate and self-contained to allow guarding through this
config option) can choose whether to import GPL code, and need to depend
on this option if they do.
Also clean up all (known) existing uses of GPL code to depend on the new
option, add some recent third-party imports to the LICENSES file, and
relicense the selfboot.c files to BSD with permission of the author.
BUG=chrome-os-partner:24957
TEST=Compiled Falco and Nyan_Big both with and without the new option,
disassembled output binaries to ensure that memcpy() looks as expected.
Original-Change-Id: I6e3a75b1a8e46291c75a876844c7a01f7d3f2a0e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203513
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit d8e5a9fdf583b5ac861f34baea6a16c4d8536512)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I446fef028264c793b946dd9f765e446bf708b4db
Reviewed-on: http://review.coreboot.org/8118
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This patch makes some slight changes to the exception hook interface.
The old code provides a different handler hook for every exception
type... however, in practice all those hook functions often need to look
very similar, so this creates more boilerplate than it removes. The new
interface just allows for a single hook with the exception type passed
as an argument, and the consumer can signal whether the exception was
handled through the return value. (Right now this still only supports
one consumer, but it could easily be extended to walk through a list of
hooks if the need arises.)
Also move the excepton state from an argument to a global. This avoids a
lot of boilerplate since some consumers need to change the state from
many places, so they would have to pass the same pointer around many
times. It also removes the false suggestion that the exception state was
not global and you could have multiple copies of it (which the exception
core doesn't support for any architecture).
On the ARM side, the exception state is separated from the exception
stack for easier access. (This requires some assembly changes, and I
threw in a few comments and corrected the immediate sigils from '$' to
the official '#' while I'm there.) Since the exception state is now both
stored and loaded through an indirection pointer, this allows for some
very limited reentrance (you could point it to a different struct while
handling an exception, and while you still won't be able to return to
the outer-level exception from there, you could at least swap out the
pointer and return back to System Mode in one go).
BUG=chrome-os-partner:18390
TEST=Made sure normal exceptions still get dumped correctly on both
archs.
Original-Change-Id: I5d9a934fab7c14ccb2c9d7ee4b3465c825521fa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202562
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 97542110f0b385b9b8d89675866e65db8ca32aeb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
*** Squashed to prevent build failures. ***
libpayload: align arm64 with new exception handling model
The exception handling was previously updated, however the
arm64 changes raced with hat one. Make the arm64 align with
the new model. Without these changes compilation will fail.
BUG=None
BRANCH=None
TEST=Can build libpayload for rush.
Original-Change-Id: I320b39a57b985d1f87446ea7757955664f8dba8f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/204402
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 0080df41b311ef20f9214b386fa4e38ee54aa1a1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9a0bb3848cf5286f9f4bb08172a9f4a15278348e
Reviewed-on: http://review.coreboot.org/8117
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This adds some assembly code to clear .bss segment. It might have been
already cleared by the loader, but it is not guaranteed. This also
helps when the program is loaded by the debugger.
BUG=none
TEST=observed that .bss is now initialized when the program is
restarted. Verified correct boundaries of the segment.
Original-Change-Id: I0aed0070da53881e4cf8c27049459040c006e765
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/201784
Original-Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
(cherry picked from commit c89ecee5ddfc33a438d4d1926d3756a48f3c2576)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic0c33d2a8ad22cd23b3ccb73c603cb14ae2aab29
Reviewed-on: http://review.coreboot.org/8060
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
ARM processors save the PC value in the Link Register when they handle
and exception, but they store it with an added offset (depending on the
exception type). In order to make crashes easier to read and correctly
support more complicated handlers in libpayload, this patch adjusts the
saved PC value on exception entry to correct for that offset.
(Note: The value that we now store is what ARM calls the "preferred
return address". For most exceptions this is the faulting instruction,
but for software interrupts (SWI) it is the instruction after that. This
is the way most programs like GDB expect the stored PC address to work,
so let's leave it at that.)
Numbers taken from the Architecture Reference Manual at the end of
section B1.8.3.
BRANCH=none
BUG=chrome-os-partner:18390
TEST=Provoked a data abort and an undefined instruction in both coreboot
and depthcharge, confirmed that the PC address was spot on.
Original-Change-Id: Ia958a7edfcd4aa5e04c20148140a6148586935ba
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199844
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit 4a914d36bb181d090f75b1414158846d40dc9bac)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib63ca973d5f037a879b4d4d258a4983160b67dd6
Reviewed-on: http://review.coreboot.org/7992
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The calling convention of payload entry function is different by architecture.
For example, X86 takes no arguments and ARM needs first param to be a
cb_header_ptr*.
To help payloads load and execute other payloads easily and correctly, we should
provide the selfboot() function in libpayload, using same prototype as defined
in coreboot environment.
BUG=none
TEST=emerge-nyan libpayload # pass
BRANCH=none
Original-Change-Id: I8f1cb2c0df788794b2f6f7f5500a3910328a4f84
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199503
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 1e916cf021ce68886eb9668982c392eadedc7b7e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I7279ef27f49ef581d25a455dd8f1f2f7f1ba58cb
Reviewed-on: http://review.coreboot.org/7907
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Some EABI conformant toolchains like GCC need additional functions like raise.
To prevent payloads adding arch-specific implementations everywhere, we should
provide the default version in libpayload.
BUG=none
TEST=emerge-nyan libpayload # pass
BRANCH=none
Original-Change-Id: Id1e3c29590aa5881aefd944a7551949ce9a47b8f
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199686
(cherry picked from commit 395810c4b744dbb720050f79a2c1a30e81464554)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2e1d8c8cb519f8e788c22d081132d23b49b8f822
Reviewed-on: http://review.coreboot.org/7906
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Turns out that when you clear 28 bits starting with bit 3, you leave bit
31 standing. Ooops...
This shouldn't really matter since that bit is reserved/SBZ in CLIDR
anyway, but it's still nice to fix it. This whole thing should really be
an AND for clarity anyway in my opinion.
Bug found in upstream NetBSD (who would've thought...).
BUG=None
TEST=Still boots.
Change-Id: Ic826e82d58fd1ce984971afea3dfa9296f746d9f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193300
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d270c0ec18b74b272451c456cbf07e99d95896cb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7745
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
TEST=Booted nyan in normal and recovery mode. Created a map, filled it with some
chars, then verified they can be read from the pointer returned.
BUG=chrome-os-partner:25587
BRANCH=None
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Id1f1be4f6d2d5734d87bf3452d4806d0fe3fda88
Original-Reviewed-on: https://chromium-review.googlesource.com/188894
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 7fda3885f51c8d383585a80e99ab3df9c789d872)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6255d11396c87f40b0ae12ceab0fd152f2478529
Reviewed-on: http://review.coreboot.org/7658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Use the SPSR to extract and inject CPSR values when an exception happens and
pass that information to exception hooks.
The register structure GDB expects when using its remote protocol has a spot
for the CPSR.
BUG=None
TEST=Built and booted on link, nyan.
BRANCH=None
Original-Change-Id: Id950fb09d72fb0f81e4eef2489c0849ce5dd8aca
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/180253
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8e7014f24a580f84c91fa7b0369dfa922918adcc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I49357fb6a65edeff7a9a48d54254308a6b0efdb7
Reviewed-on: http://review.coreboot.org/7657
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
To support a GDB stub, it will be necessary to trap various exceptions which
will be used to implement breakpoints, single stepping, etc.
BUG=None
TEST=Built and booted on Link with hooks installed and saw that they
triggered when exceptions occurred. Built and booted on nyan.
BRANCH=None
Original-Change-Id: Iab659365864a3055159a50b8f6e5c44290d3ba2b
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/179602
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8db0897b1ddad600e247cb4df147c757a8187626)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5e7f724b99988cd259909dd3bd01166fa52317ec
Reviewed-on: http://review.coreboot.org/7656
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
To find the coreboot tables, the payload has historically searched for their
signature in a predefined region of memory. This is a little clumsy on x86,
but it works because you can assume certain regions are RAM. Also, there are
areas which are set aside for the firmware by convention. On x86 there's a
forwarding entry which goes in one of those fairly small conventional areas
and which points to the CBMEM area at the end of memory.
On ARM there aren't areas like that, so we've left out the forwarding entry and
gone directly to CBMEM. RAM may not start at the beginning of the address space
or go to its end, and that means there isn't really anywhere fixed you can put
the coreboot tables. That's meant that libpayload has to be configured on a
per board basis to know where to look for CBMEM.
Now that we have boards that don't have fixed amounts of memory, the location
of the end of RAM isn't fixed even on a per board level which means even that
workaround will no longer cut it.
This change makes coreboot pass the location of the coreboot tables to
libpayload using r0, the first argument register. That means we'll be able to
find them no matter where CBMEM is, and we can get rid of the per board search
ranges.
We can extend this mechanism to x86 as well, but there may be more
complications and it's less necessary there. It would be a good thing to do
eventually though.
BUG=None
TEST=Built and booted on nyan. Changed the size of memory and saw that the
payload could still find the coreboot tables where before it couldn't. Built
for pit, snow, and big.
BRANCH=None
Original-Change-Id: I7218afd999da1662b0db8172fd8125670ceac471
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185572
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ca88f39c21158b59abe3001f986207a292359cf5)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iab14e9502b6ce7a55f0a72e190fa582f89f11a1e
Reviewed-on: http://review.coreboot.org/7655
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch changes the ENTRY() macro in asm.h to create a new section
for every assembler function, thus providing dcache_clean/invalidate_all
and friends with the same --gc-sections goodness that our C functions
have. This requires a few minor changes of moving around data (to make
sure it ends up in the right section) and changing some libgcc functions
(which apparently need to have two names?), but nothing serious.
(You may note that some of our assembly functions have data, sometimes
even writable, within the same .text section. This has been this way
before and I'm not looking to change it for now, although it's not
totally clean. Since we don't enforce read-only sections through paging,
it doesn't really hurt.)
BUG=None
TEST=Nyan and Snow still boot. Confirm dcache_invalidate_all is not
output into any binary anymore since no one actually uses it.
Original-Change-Id: I247b29d6173ba516c8dff59126c93b66f7dc4b8d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/183891
(cherry picked from commit 4a3f2e45e06cc8592d56c3577f41ff879f10e9cc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ieaa4f2ea9d81c5b9e2b36a772ff9610bdf6446f9
Reviewed-on: http://review.coreboot.org/7451
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
These drivers are needed right away and never really fit into depthcharge's
driver model anyway.
CQ-DEPEND=CL:194064
BUG=None
TEST=Built and booted nyan, link, and peach_pit and verified that timer values
in cbmem were reasonable. Built for nyan_big, nyan_blaze and daisy.
BRANCH=None
Original-Change-Id: Ia7953cfece57524262a6c7d6537082af7a00f4d6
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/194058
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit f30a410f0a248c93bc34f5868af1596bf8ce3cdd)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I782d20f3cd63210a87c712643c7a53753f5ef301
Reviewed-on: http://review.coreboot.org/7225
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Julius Werner