Fix the values that were off by one.
This was discovered when using postcar stage that prints with
debuglevel BIOS_NEVER.
Change-Id: I73a077950ed0dc735d89c9747a8da0a25f30822d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
There have been discussions about removing this since it does not seem
to be used much and only creates troubles for boards without defaults,
not to mention that it was configurable on many boards that do not
even feature uart.
It is still possible to configure the baudrate through the Kconfig
option.
Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector
code) the reboot counter stored in `reboot_bits` isn't reset on a reboot
with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR
enabled, later stages (e.g. payload, OS) have to clear the counter too,
when they want to switch to normal boot. So change the bits to (h)ex
instead of (r)eserved.
To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also
remove all occurences of the obsolete `last_boot` bit that have sneaked
in again since 24391321 (mainboard: Remove last_boot NVRAM option).
Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/16157
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-by: York Yang <york.yang@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The last_boot NVRAM option was deprecated and removed in
commit 3bfd7cc6. Remove the last_boot option from all
affected mainboards to eliminate user confusion.
Change-Id: I7e201b9cf21dfe5dda156785bad078524098626d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12316
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
This mainboard is very similar to the M4A785-M, but it has
DDR3 instead of DDR2.
That's why most of the code was copied or included from
the m4a785-m directory
Notable changes between the two mainboards include:
* the selection of the last microcode (mc_patch_010000b6.h)
which made it pass the CPU init.
* the selection of DDR3 which made it pass the ram init
This change was tested with the Trisquel 5.0 GNU/Linux distribution
which uses the linux-libre version 2.6.38-12-generic
The mainboard boots fine, however some special care is required for
the onboard sound CODEC, and the onboard video chip:
* the onboard sound CODEC(snd-hda-* has to be blacklisted), the issue
is the same than the ASUS M4A785-M mainboard:
It causes a flood of interupts which prevents booting
* The internal video chip currently requires pci=nocrs, else
the graphics are frozen as soon as the radeon module loads,
and dmesg would print the following(the card only has 256M,
and the mainboard was equiped with 2G of RAM):
[ 3.674762] [drm] radeon: 3584M of VRAM memory ready
[ 3.679863] [drm] radeon: 512M of GTT memory ready.
instead of :
[ 45.876088] [drm] radeon: 256M of VRAM memory ready
[ 45.876089] [drm] radeon: 512M of GTT memory ready.
* The screen(both VGA and HDMI) flickers at high resolution
* Sometimes the computer freeze while changing the resolution
(even the serial console stops responding)
The following peripherals were tested:
* The ath9k PCI wireless card was tested
* The SATA hard disk works fine
* the USB keyboard and mouse work fine
* htop see 2 cores
* serial port works under coreboot and GNU/Linux
* power off and reboot works
CPU frequency cannot be changed yet, this is addressed
in a new commit.
More detail are available here:
http://www.coreboot.org/ASUS_M4A785T-M
dmesg is available here:
http://www.coreboot.org/pipermail/coreboot/2011-November/067604.html
The mailing list thread on the graphic problem is here:
http://www.coreboot.org/pipermail/coreboot/2011-November/067466.html
Change-Id: I5df0bc1f9f0071b1e1ee7c8a356bf517aa8cf732
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: http://review.coreboot.org/457
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
