Since upstream edk2 totally drop 32-bit support for UefiPayload, totaly drop it.
Test: Build and run qemu successful boot up into EFI shell with UEFIPAYLOAD option.
Change-Id: Iadd9a3c455fad4eede8a0a017415acd2c57fba04
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54189
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Drop the deprecated COREBOOTPAYLOAD option, and replace it with MrChromebox's
updated UefiPayloadPkg option. Simplify the Kconfig options to make it easier
to build from upstream edk2 master. Drop the TIANOCORE_USE_8254_TIMER Kconfig
option since it applied only to CorebootPayloadPkg. Clean up the Makefile now
that we're only building from a single Tianocore package/target.
Test: build/boot qemu Q35 target with both UefiPayload and Upstream options.
Change-Id: If545fbd0c30be6dcc6ff43107b80980fa23a527e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54019
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a Kconfig option to set the keyboard translation state on exit and
set the default to true. This restores the keyboard to the power-up
defaults for firmware that does not always run libpayload keyboard init
to have consistent state, and provides an option to disable translation
for keyboards that might need it.
Change-Id: I25dfe3f425a5bb57e97476564886672b707aa3bd
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Use static_fw_config.h during depthcharge build to be in line with latest
depthcharge changes on the main branch.
https://chromium-review.googlesource.com/c/chromiumos/platform/depthcharge/+/2523517
BUG=none
TEST=Boot to OS
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I72a681d9321750c392000e11a21d81020dde3fd7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
If we select scancode set #1 and keep that, it can confuse Linux
with keyboards that don't return to set #2 when asked to load the
defaults. This happens for instance with various integrated Think-
Pad keyboards but was also seen with an external PS/2 one.
The chosen configuration, scancode set #2 without translation, seems
to be the default for many systems. So we can expect other payloads
and kernels to work with it.
Change-Id: I28d74590e9f04d32bb2bbd461b67f15014f927ec
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47594
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead of ignoring keyboards indefinitely when they failed to
initialize, we wait 5s and then start over with the hotplug
detection. As we always assume a present keyboard at first,
we'd otherwise never have a chance to hot plug a device after
the initial 30s timer ran out.
Change-Id: I8dec4921b2e932442d52b5118cdcf27090633498
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
While we assume a keyboard is attached, we send an echo command every
500ms. If there is no data coming from the keyboard within 200ms, we
assume it was detached.
Correspondingly, if we assume no keyboard is attached, we run an echo
command once per second.
Change-Id: I2c75182761729bf30711305f3d8b9d43eafad675
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Three stages of the new tint build system:
1) generate_core.sh extracts the core part from buildgcc script,
most importantly the checksum calculation/verification functions.
2) tintify_core.sh adds the tint-specific footer/header to the core,
such as the properties of current version including its checksum.
3) tint.sh - generated and "tintified" core script - builds a tint.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: Ib71f5b861ecf91949a5af12812258e60873f0498
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Upstream edk2 dropped separate 32-bit support for UefiPayloadPkg, and
removed the architecture suffix from the package dsc filename.
Test: build/run qemu with CONFIG_TIANOCORE_UEFIPAYLOAD selected.
Change-Id: I40077f1d370f0cb5627645b305b57e6c71e44095
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reproducible builds have to be independent from user, host,
domain, time.
Taken from OpenWrt (GPL2).
Change-Id: I420588acc66647051c08e4da6fbedc205cd62877
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35393
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Without the boot template, u-root doesn't include any boot commands.
Booting other OS is impossible.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Change-Id: I7d0742d115715eb40e293e2a8711d1ff20d8970a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51331
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is already the case on x86 but not on the ARM platforms, and
{read,write}[bwl] are using volatile pointers, too, so follow suit.
Change-Id: I6819df62016990e12410eaa9c3c97b8b90944b51
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Rebase the libpayload_tint.patch to update its internal version
numbers from 0.04+nmu1 to 0.05.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I91f780f80026147c3c35330625a4106c65a1ddf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50468
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Old archive is not available anymore. The tint sources inside the new
archive are the same (something changed in a debian subdirectory but
we aren't using it), so a libpayload_tint.patch is still valid.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: If556fac7d1d8379a022f59ed6aee1450b7bc5aa7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48616
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The sub-process calls break make's dependency tracking, hence we have
to always perform the calls if we want to allow automatic, incremental
builds.
We let each rule depend on a new, phony target `force-payload`. It has
roughly the same effect as tagging all the targets as phony, but doing
so would feel wrong as some of them are actual files.
Change-Id: I1bc2406db371e8dddbfdf71f68a6665a5b558f5e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The new `Makefile.payload` can be included by the Makefiles of pay-
loads for in-tree builds. The basic idea is to use libpayload's
build results without the `make install` step, and to ensure that
incremental builds work. For instance, if libpayload's code changes,
a `make` for the payload would automatically update the libpayload
build and rebuild the payload. But if there are no code changes in
libpayload, only updated files of the payload will be re-built.
The configuration of libpayload is supposed to be automatically
generated from a `defconfig` file. If this `defconfig` changes,
libpayload and the payload will be re-built.
Change-Id: If5319f1bf0bcd09964416237c5cf7f8e59f487a2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47633
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
coreboot's Makefile exports a lot of variables that influence make sub-
processes (e.g. for Kconfig). We don't want these variables leak into
sub-processes for (lib)payload builds, hence unexport them.
Change-Id: I8da2d8db6238d456723b9c22bee80c62e97027b0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48940
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
coreboot's Makefile exports a lot of variables that influence make sub-
processes (e.g. for Kconfig). We don't want these variables leak into
sub-processes for (lib)payload builds, hence unexport them.
Change-Id: I7d65c0aa6d4550bd6600c437e838339af69496da
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48939
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
FILO's Makefile will check for libpayload and might not even `clean`
if it's not found.
Change-Id: If5f8f4ecce317e54cd4b5688553cc38220f6e6df
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add read64 and write64 for consistency with x86.
BUG=b:178785769
Change-Id: I342e3a23201d0b804ea5ecfe47ee3e4bb516de4c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
They all operate on that file, so just add it globally.
Change-Id: I953975a4078d0f4a5ec0b6248f0dcedada69afb2
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Target added to INTERMEDIATE all operate on coreboot.pre, each modifying
the file in some way. When running them in parallel, coreboot.pre can be
read from and written to in parallel which can corrupt the result.
Add a function to create those rules that also adds existing
INTERMEDIATE targets to enforce an order (as established by evaluation
order of Makefile.inc files).
While at it, also add the addition to the PHONY target so we don't
forget it.
BUG=chromium:1154313, b:174585424
TEST=Built a configuration with SeaBIOS + SeaBIOS config files (ps2
timeout and sercon) and saw that they were executed.
Change-Id: Ia5803806e6c33083dfe5dec8904a65c46436e756
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49358
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It either doesn't exist (in-tree builds) or is the same as $_LIBDIR.
Change-Id: I9551cbfc3295d86c22a3785be7cdc0f65eeb08c4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47632
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We only need `$_OBJ` in the include path for in-tree builds. Also,
curses only need special handling for those and PDCurses turned out
to need many more include paths.
Change-Id: Idd29ef33065033e26ba61b09d412d8ca3566d643
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Instead of checking for an already fully build `libpayload.a`, we check
for the `libpayload.config` which is the actual prerequisite to start
using `lpgcc`. This will allow compilation of payload sources before or
in parallel with the build of `libpayload.a`.
Change-Id: Ic0143fefe33560af8b013ae48bbbe231b3ad46f3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Introduce a `$_OBJ` variable, that points to the build directory for
in-tree usage of `lpgcc`. If unset, the default `../build` relative
to the location of `lpgcc` is used.
Change-Id: I35112d7533d69aa51252dd2bceec010a62522403
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47629
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This should make it easier to find the correct config for in-tree
builds.
Change-Id: I08d396ae3cedc65f63c4b8865701ea123c7d56cb
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47628
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Keep libpayload's xcompile in its build dir. While we are at it,
align things with the top-level version.
Having `.xcompile` in a central place led to race conditions when
multiple payloads try to build their own libpayloads in parallel.
Change-Id: I504e1862db79b368289867f7568c9169f27a1549
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Extract the architecture (-a) and package (-p) options into a
new variable (ARCH) to simplify the construction of BUILD_STR.
Test: build/boot various boards w/Tianocore payload
Change-Id: I490d48428ac56d613d0b704700dfcf4ebfb2d245
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48942
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a Kconfig option to set the tianocore boot timeout,
which is passed to the payload via a command line parameter.
Allows boards without an internal display (eg) to set a longer
boot timeout, in order to ensure the boot splash/menu prompt
are visible upon boot.
The associated changes on the tianocore side have already been
merged into MrChromebox's CorebootPayloadPkg and UefiPayloadPkg
branches (coreboot_fb and uefipayloadpkg respectively).
Change-Id: Ifeaadff05f6667d642c05b81f53c1d2dbc450af6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The keyboard self-test is required for some devices. At least one
device (integrated keyboard in a ThinkPad X201) actually starts the
test automatically leading to spurious output and no response for
the first seconds.
We wait up to 5s for the self-test result. On failure or timeout,
the command will be repeated until the 30s init timer runs out. This
happens all in the background of the UI polling loop.
To not unnecessarily delay the boot process, we first try an oppor-
tunistic initialization which skips the self-test.
Change-Id: Ie07b31e74d06e116ac81e76309621eed39a19b49
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Will be used to time out in states that don't always advance.
Change-Id: I28235e7638d8157cedf81fd915a41d28a1fc070b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47087
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We'll process the init sequence as part of the polling loop. This
should have several advantages:
* It eases error handling, i.e. we can return to an earlier state.
* We don't have to stall initialization when a keyboard takes a
little longer.
* Generally, these keyboards can be hot-plugged (albeit not by
design).
Change-Id: I9cf5cf31eb420b3994bec20e56a72d37f3d2996e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Draining the keyboard's buffer is only possible when the keyboard
port is enabled. We should also disable input scanning before, as
the buffer could be filled again with new keystrokes otherwise.
Change-Id: Ibac9c0d04880ff4a3efda5ac53da2f9731f6602c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Move the input-buffer draining into a function. It uses the low-level
i8042 API directly to avoid conflicts with changes in the high-level
keyboard API.
Change-Id: I9427c5b8be4d59c2ee3da12d6168d34590043682
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47084
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Even if we are careful, it's still possible that we read spurious
data from the keyboard, e.g. keystrokes. Namely, when we send the
reset/disable command, there is a race before the command is pro-
cessed.
So we should always process data from the keyboard in a loop. We
break it, when an ACK (0xfa) or a NAK (0xfe) is received, and warn
on unexpected data unless it might be due to the mentioned race.
This also gives us the opportunity to use command-specific timeouts
which we take from Linux: 1s for the keyboard self-test (as there
are keyboards that perform the test before acking the command) and
200ms for all other commands.
Change-Id: I60a2643a8ff4b9231c63bf970c8749c97c7d8926
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47083
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Some background first: The original XT keyboards used what we call
scancode set #1 today. The PC/AT keyboards introduced scancode set #2,
but for compatibility, its controller translated scancodes back to
set #1 by default. Newer keyboards (maybe all we have to deal with)
also support switching the scancode set.
This means the translation option in the controller and the scancode
set selection in the keyboard have to match. In libpayload, we only
support set #1 scancodes. So we either need the controller's trans-
lation on and set #2 selected in the keyboard, or the controller's
translation off and set #1 selected in the keyboard.
Valid configurations:
* SET #1 + XLATE off
* SET #2 + XLATE on
Both with and without the PC_KEYBOARD_AT_TRANSLATED option, we were
only configuring one of the two settings, leaving room for invalid
configurations. With this change, we try to select scancode set #2
first, which seems to be the most supported one, and configure the
controller's translation accordingly. We try to fall back to set #1
on failure.
We also keep translation disabled during configuration steps to
ensure that the controller doesn't accidentally translate confi-
guration data.
On the coreboot side, we leave the controller's translation at its
default setting, unless DRIVERS_PS2_KEYBOARD is enabled. The latter
enables the translation unconditionally. For QEMU this means that
the option effectively toggles the translation, as QEMU's controller
has it disabled by default. This probably made a lot of earlier
testing inconsistent.
Fixes: commit a95a6bf646 (libpayload/drivers/i8402/kbd: Fix qemu)
The reset introduced there effectively reverted the scancode
selection made before (because 2 is the default). It's unclear
if later changes to the code were only necessary to work
around it.
Change-Id: Iad85af516a7b9f9c0269ff9652ed15ee81700057
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change adds details about the memory map windows to translate
addresses between SPI flash space and host address space to coreboot
tables. This is useful for payloads to setup the translation using the
decode windows already known to coreboot. Until now, there was a
single decode window at the top of 4G used by all x86
platforms. However, going forward, platforms might support more decode
windows and hence in order to avoid duplication in payloads this
information is filled in coreboot tables.
`lb_spi_flash()` is updated to fill in the details about these windows
by making a call to `spi_flash_get_mmap_windows()` which is
implemented by the driver providing the boot media mapping device.
BUG=b:171534504
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I00ae33d9b53fecd0a8eadd22531fdff8bde9ee94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48185
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Provide get_mmu_ranges() for ARM64 to let payloads could get
MMU ranges for all used memory regions.
BUG=b:171858277
TEST=Build in x86, arm, arm64.
emerge-zork libpayload depthcharge
emerge-nyan libpayload depthcharge
emerge-asurada libpayload depthcharge
Signed-off-by: Meng-Huan Yu <menghuan@google.com>
Change-Id: I39b24aefc9dbe530169b272e839d0e1e7c697742
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This turns on the compiler's printf style format string checker.
BUG=b:167517417
TEST=enabled all USB controllers on volteer and fixed resulting
compiler errors when USB_DEBUG is enabled.
Change-Id: Ic94ebcbafdde8a5f79278b5635111b99af40f892
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45025
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This fixes format string mismatch errors in the USB subsystem found by
the compiler's format string checker.
BUG=b:167517417
TEST=enabled all USB controllers on volteer and fixed resulting
compiler errors when USB_DEBUG is enabled.
Change-Id: I4dc70baefb3cd82fcc915cc2e7f68719cf6870cc
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Using the INTERMEDIATE target this can be done in the proper dir.
Change-Id: Ie105231655ef4b49234f0944f638545fe79f07cb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The current timeout of 500ms is too low. For instance self-test
of the KBC integrated into IT8516E took almost 1s in tests. We
already check for presence of the KBC before the self-test. So
the timeout should only trigger on a hardware defect and we can
leave some margin.
Change-Id: I95f01a4e605a9c7deb894a71e102c3a881759bb1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Work on this mainboard was abandoned and never finished. It's not really
usable in its current state, so let's get rid of it.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I4cd2e2cd0ee69d9846472653a942fa074e2b924d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The OHCI header file declares various enums as follows:
enum { ... } enum_name;
Since the name is at the end, this is actually declaring a variable
called enum_name and *not* a type, which is causing a multiple
definition error in GCC 10. Move the enum_name before the opening brace
to prevent this.
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I452c0a1b118990942aa53f1e7e77f5e8378e8975
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Headers in libpayload define various structs like so:
struct struct_name { ... } __packed;
However, these header files do not include the compiler.h macro that
defines what __packed is, so they are actually defining a variable named
__packed and *not* declaring a packed struct. This leads to defining the
same variable multiple times, which was caught by GCC 10. Add compiler.h
to the compiler parameters so it is included in all files automatically.
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Ia67182520dc94149e06fe9e03a14b3fc2ee29973
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This introduces a Kconfig option for compiling coreinfo with LTO.
This option can be used independently of LTO in libpayload, though will
benefit most if that is enabled as well. If both are enabled, the
final size of coreinfo.elf is reduced from 95 KiB to 92 KiB.
Tested in QEMU and on Thinkpad T500.
Change-Id: I6feacdb911b52b946869bff369e03dcf72897c9f
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38293
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Link time optimization is a technique for whole-program optimization.
Instead of doing code generation during compilation, the compiler saves
its intermediate representation to the object files. During the final
linking step, it will then merge all the object files together and
perform optimizations on the entire program. This can often reduce the
final binary size, but also may increase the total compilation time.
This patch introduces a Kconfig option for enabling link time
optimization in libpayload. Since libpayload does no linking of its own,
its LTO archive files will contain only IR and no generated code.
Downstream projects will need to use LTO-aware tools when manipulating
the archives (eg. gcc-ar and gcc-nm), but otherwise do not need to use
LTO themselves -- the compiler will recognize which files are LTO and
which are not, so enabling this option should mostly be "drop in".
For example, when building coreinfo.elf using tinycurses libpayload:
binary size compilation time
default 114 KiB 11.49s
LTO 95 KiB 10.36s
In this case the total compilation time was actually shorter -- despite
the final linking step taking longer, this was offset by the shorter
compilation times for each individual file (since there is no code gen
until the very end).
Change-Id: I048f2ff6298ed0d891098942e1e8b29d35487b91
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38291
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We can skip the PIT-based TSC calibration if we can derive the invariant
TSC rate from CPUID/MSR data. This is necessary if the PIT is disabled,
which is the default, for instance, on Coffee Lake CPUs.
This implementation should cover all Intel Core i processors at least.
For older processors, we fall back to the PIT calibration.
Change-Id: Ic6607ee2a8b41c2be9dc1bb4f1e23e652bb33889
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
The list is incomplete and only contains what we need in the follow-up
commit. It can be extended at will.
Change-Id: Ibf8ddaf510eb513ee74af3e78da46b04802a91b9
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47059
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
There are currently 3 different strapping ID entries in the coreboot
table, which adds overhead. The new fw_config field is also desired in
the coreboot table, which is another kind of strapping id. Therefore,
this patch deprecates the 3 current strapping ID entries (board ID, RAM
code, and SKU ID), and adds a new entry ("board_config") which provides
board ID, RAM code, SKU ID, as well as FW_CONFIG together.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I1ecec847ee77b72233587c1ad7f124e2027470bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
There's no need for the global list of files to ignore, so use git's
ability to work with more local configuration.
Change-Id: I50882e6756cbc0fdfd899353cc23962544690fb3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46879
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Also rename the prompt to "tested" to make it more obvious that there
is no really stable version.
Change-Id: Ib719fe5c30783a53ddad2a2dc2d9ecda37a05ac2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Use `bool` whenever `0` was used to indicate an error. The mixing of
different types for return values was mildly confusing and potentially
dangerous with the i8042 API close by that uses `0` for success.
Change-Id: I876bb5076c4921f36e3438f359be8ac4c09248cc
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
SMMSTORE version 2 is a complete redesign of the current driver. It is
not backwards-compatible with version 1, and only one version can be
used at a time.
Key features:
* Uses a fixed communication buffer instead of writing to arbitrary
memory addresses provided by untrusted ring0 code.
* Gives the caller full control over the used data format.
* Splits the store into smaller chunks to allow fault tolerant updates.
* Doesn't provide feedback about the actual read/written bytes, just
returns error or success in registers.
* Returns an error if the requested operation would overflow the
communication buffer.
Separate the SMMSTORE into 64 KiB blocks that can individually be
read/written/erased. To be used by payloads that implement a
FaultTolerant Variable store like TianoCore.
The implementation has been tested against EDK2 master.
An example EDK2 implementation can be found here:
eb1127744a
Change-Id: I25e49d184135710f3e6dd1ad3bed95de950fe057
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
The PCI bus gets already scanned while gathering system information.
Therefore, use the pacc pointer from sysinfo_t to read the device class
of PCI devices instead of rescanning the bus.
Change-Id: I4c79e71777e718f5065107ebf780ca9fdb4f1b0c
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Currently, the PCI bus gets scanned multiple times for various reasons
(e.g. to read the device class). Therefore, and in preparation to
CB:46416, introduce the pacc pointer in the sysinfo_t struct and scan
the PCI bus while gathering system information.
Change-Id: I496c5a3d78c7fb5d7c9f119a0c9a0314d54e729f
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Rename pci_scan_bus() since the name is already used in libpayload.
Change-Id: I9d4a842b77f418484e1fcf60a79723480a53e30d
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
32-bit LBA limits drives, that have or emulate 512B sectors, to 2TiB
capacity. Therefore, enable the 64-bit support.
Change-Id: I663029a2137c5af3c77d576fe27db0b8fa7488a9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Since the list of tested controllers is not actively maintained, enable
all AHCI controllers by default. Also, improve the readability of its
help text by adding a comma to it.
Change-Id: If30f58f8380ab599f8985e85c64510dc88e96268
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
The device class is read at different places and it is read from the
hardware directly. Therefore, and in preparation to CB:46416, introduce
the device class attribute in the pci_dev struct. With this, there is
only one interaction with the hardware and it's also more user friendly.
Change-Id: I5d56be96f3f0da471246f031ea619e3df8e54cfb
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46347
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The appropriate way to print a u64 variable regardless of the current
architecture is to use the PRI*64 macros. libpayload is mostly used
in 32 bits but when ported to other projects and compiled in 64 bits
it breaks the compilation.
Change-Id: I479fd701f992701584d77d43c5cd5910f5ab7633
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BOOTBOOT is a multi-platform, architecture agnostic boot protocol.
The protocol describes how to boot an ELF64 or PE32+ executable inside
an initial ram disk image into clean 64 bit mode. This version uses
libpayload to do that. Depending on the lib's configuration, initrd
can be in ROM as a cbfs file or a Flashmap partition; on disk a GPT
partition or a file on a FAT formatted ESP partition.
For more information see https://gitlab.com/bztsrc/bootboot
Change-Id: I8692cde0730338026a7760a293c1e37f66004bc0
Signed-off-by: Zoltan Baldaszti <bztemail@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The current initialization of the 'equals' counter is incorrect, so that
when 'equals >= SSZ * SSZ', the pixels in the sample array might not be
all the same, leading to a wrong pixel value being set in the
framebuffer.
The 'equals' counter stores the number of latest pixels that were
exactly equal. Within the for loop of 'ox', the sample array is updated
in a column-based order, and the 'equals' counter is updated
accordingly. However, the 'equals' counter is initialized in a row-based
order, which causes it to be set too large than it should be. Consider
the example where sample[sx][sy] are initially:
[X X X A A A] // sy = 0
[X X X B B B]
[X X X B B B]
[X X X B B B]
[X X X B B B]
[X X X B B B] // sy = SSZ
Then, the correct implementation will initialize 'equals' to be 15, with
last_equal being B. Suppose all of the remaining pixels are B. Then, at
the end of the 'while (fpfloor(ixfp) > ix)' loop when ix = 4, or
equivalently after 4 more columns of sample are updated, 'equals' will
be 15 + 6 * 4 = 39, which is greater than SSZ * SSZ = 36, but we can see
there are still 2 A's in the sample:
[B B B B A A]
[B B B B B B]
[B B B B B B]
[B B B B B B]
[B B B B B B]
[B B B B B B]
Therefore, we must also initialize the 'equals' counter in a
column-based order.
BUG=b:167739127
TEST=emerge-puff libpayload
TEST=Character 'k' is rendered correctly on puff
BRANCH=zork
Change-Id: Ibc91ad1af85adcf093eff40797cd54f32f57111d
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The current realloc() works by freeing the origin buffer, allocating a
new one, and copying the data over. It's true that free() won't touch
the actual memory. However, the alloc() following it will potentially
modify the memory that belongs to the old buffer in order to create a
new free block (right after the newly allocated block). This causes 8
bytes (HDRSIZE) to be overwritten before being copied to the new buffer.
To fix the problem, we must create the header of the new free block
after the data is copied. In this patch, the content of alloc() is split
into two functions:
1. find_free_block(): Find a free block with large enough size, without
touching the memory
2. use_block(): Update the header of the newly allocated block, and
create the header of the new free block right after it
Then, inside realloc(), call memmove() call right after
find_free_block() while before use_block().
BUG=b:165439970
TEST=emerge-puff libpayload
TEST=Puff boots
TEST=Verified realloc() correctly copied data when buffers overlapped
Change-Id: I9418320a26820909144890300ddfb09ec2570f43
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
According to the xHCI spec, the Slot State field in the Slot Context
Data Structure is 5 bits wide. So, fix the code to match.
ref. xHCI spec 1.2
section 6.2.2, Figure 6-2: Slot Context Data Structure
BUG=none
TEST=xHCI compiles
Change-Id: I0ae735af3d0840aeee846fa939c37af9aea3dff1
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45023
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We do not need to set the CS (Command Stop) bit in the Command Ring
Control Register. CS is implied by CA (Command Abort). I'm not sure if
there is a defined execution order for these command bits, so it's
safer to only use the CA bit as it includes the CS function.
Ref: xHCI spec 1.2 (May 2019), Section 5.4.5, Table 5-24.
BUG=b:160354585,b:157123390
TEST=able to boot into recovery using USB stick on servo v2 on volteer
as well as HooToo 8-1 hub
Change-Id: Iaeba98b6da8da49f529358ca6d68270440ea0f42
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This fixes issues with how we handle events generated by the xHCI
"command abort" command. first, depending on the state of the xHCI
controller, the COMMAND_ABORTED may not be generated. If the
controller was between commands, only the COMMAND_RING_STOPPED event
will be generated. Second, do not adjust the command ring "cur"
pointer as that just confuses the controller.
BUG=b:160354585,b:157123390
TEST=able to boot into recovery using USB stick on servo v2 on volteer
as well as HooToo 8-1 hub
Change-Id: I055df680d1797f35d9730e2bfdb4119925657168
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Lijian Zhao