This is currently killing the jenkins builds. This patch allows it to
be disabled until the reason is found.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I16dba80a88953aa95f7f647ba12b2ec3297ab81f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
The address mode is an internal mode which AMD FWs use. Regular
developers don't have to know that. Just report the relative address
every time. For the cases head and body are split, the address of body
is also reported.
Change-Id: I77d9aac0b3d996363341c1d2dae049ec344b39aa
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This change adds 2 command line parameters, --skip_set and --skip_unset
that allows abuild to skip boards with particular Kconfig values either
set or not set.
Note that it only works on BOOL type variables.
This can be set on the abuild command line, or the JENKINS_ABUILD_OPT=
variable on the make command line.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I43336484cf25f83065ec7facf45c123d831024b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Found-by: linter
Change-Id: I7c6d0887a45fdb4b6de294770a7fdd5545a9479b
Signed-off-by: Alexander Goncharov <chat@joursoir.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72795
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Flashrom needs libgpiod-dev to build the new bitbanging programmer
driver for Linux libgpiod.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I88f7e11fab115487cc44d4b89b3eab4745ad058d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
And make less levels of indentations in the code.
Change-Id: Ib8cae386eace4f423bde9c252992625e1ff3c690
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This allows the user to pass one or more arguments through the testsoc
script to abuild.
Example:
testsoc -K SOC_AMD_CEZANNE -a "--skip_unset BOARD_GOOGLE_NIPPERKIN"
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic2bc8d656022560ed1eebf6eee0512d3633ebe84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72766
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On family 15h and 16h processors with PSP, the PSP firmware type 0x5f
corresponds to AMD_FW_PSP_SMUSCS, while on family 17h and 19h this
corresponds to AMD_FW_TPMLITE. Add comments to those two enum values to
clarify this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia5c125ec6a0eb548f58a457f9040278391d2101c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bao Zheng <fishbaozi@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
For the PHX, it uses subprog 0.
For the PHX2, it uses subprog 1.
Change-Id: Ib013f264fc9940ad95e559fe19bba72c06a19625
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The testsoc script was pulling in odd results when the -K option matched
options in sources, Makefiles, and device trees. Adding another grep to
limit the list to just Kconfig matches ensures that only actual
mainboards are built.
TEST="./util/testsoc -K PICASSO" no longer tries to build mainboard "0"
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I3860df4520a5594fb9c1a06e75487520b7d5d275
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72655
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to support logging events for when we show early signs
of life to the user during CSE FW syncs and MRC trainings add
support for the ELOG_TYPE_FW_EARLY_SOL type.
BUG=b:266113626
TEST=verify event shows in eventlog CSE sync/MRC training
Change-Id: I3913cb8501de9a2605266cf9988a7195576cb91d
Signed-off-by: Tarun Tuli <tarun.tuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71296
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
It is about AB recovery layout which only has level 2.
Change-Id: I836f11ca0bf5ad37e5093419465244a5c83318cb
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Instead of directly accessing the region_name array use a helper
function. This allows to move the region name array to a separate
file.
Change-Id: Ifc810da1628cebd2728d0185502c462ff9428597
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Drop unused chipsets that do not use an IFD.
Change-Id: I999e5e5d2063b8d33819fb22296ed486e1194cbb
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Change https://review.coreboot.org/c/coreboot/+/54305 "util/ifdtool:
Use -p platform name to detect IFDv2 platform and chipset" made
the '-p' argument mandatory for IFDv2 platforms.
Drop the IFDv2 platform CHIPSET_C620_SERIES_LEWISBURG from IFDv1
detection.
Change-Id: If29f8718b7aa696cdc07deef4c98be9a68c66f10
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68680
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Wellsburg is IFDv2 compatible in most fields, but not in all.
It only has 8 regions and the flash master bits match the defines for
IFDv1 and thus has an "IFDv1.5" descriptor.
Add a new enum for IFDv1.5 descriptor and use them to properly operate
on this IFD.
The 'SPI programming guide' is inconsistent and mentions 6 regions
in one place, but 7 regions in another chapter. Tests showed that it
actually supports 7 regions.
Add support using the -p argument to specify Wellsburg platform.
The previous patch made sure that only 8 regions are used and that no
corruption can happen when operating in IFDv2/IFDv1.5 mode.
Tested on Intel Grangeville.
Documents used:
Intel Document Id: 516552
Intel Document Id: 565117
Change-Id: I651730b05deb512478d059174cf8615547d2fde4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Co-developed-by: Julian Elischer <jrelis@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
It should be PSP_RIB_FILE which is already there.
Change-Id: Ie7471489bd34554e357510b04473102d002f9988
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72506
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This is all handled at runtime now, so there is no need to have the
ability to statically add lapics to the devicetree.
Change-Id: I0746eb808a2956ac75f76c8189a9ecf190e33ce9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69378
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
"\" is missing at the end of CC line for build_NASM.
Change-Id: Ic29ee731def31f958f939efe19bdb55b503eb6ba
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The comment in the header amdfwtool.c was written long time ago and is
needed to get updated.
Change-Id: I6f64c9a240503f9d0bf240916c1066944fa39d27
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
BUG=b:239110778
TEST=Make sure that the output of elogtool is unaffected by this change.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ia1a6341abd834dd9ad5f12c9f2eefb0489364a08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72099
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix the comment as "checkpatch" says.
Change-Id: Ifa5d7de037aa7024779f3aa4a5d2f5033eed264a
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71648
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
EBG (Emmitsburg) PCH is used in Intel SPR-SP chipset.
Its datasheet is Intel doc# 606161.
Add Intel Emmitsburg PCH GPIO pin definitions.
Also common code change is made to support Intel Emmitsburg PCH:
a. Instead of 2 PAD registers per GPIO, it has 4 PAD registers.
b. The register address space may not be contiguous from one GPIO
group to the next GPIO group.
Change-Id: Ia0d9179544020b6abb0be1ecd275a9a46356db8a
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
The dir_location and efs_location have the same meaning. Now the dir
means body.
Change-Id: I02d4dc848f189449b6f0a1eea5cd6b8020a7d101
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Intel Ice Lake is unmaintained and the only user of this platform ever
was the Intel CRB (Customer Reference Board). As it looks like, it was
never ready for production as only engineering sample CPUIDs are
supported.
As announced in the 4.19 release notes, remove support for Intel
Icelake code and move any maintenance on the 4.19 branch.
This affects the following components and their related code:
* Intel Ice Lake SoC
* Intel Ice Lake CRB mainboard
* Documentation
Change-Id: Ia796d4dc217bbcc3bbd9522809ccff5a46938094
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72008
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
coreboot adds a patch on top of upstream Kconfig which allows the
generated Kconfig dependency files to be placed in a separate
directory than the autoconfig files based on the KCONFIG_SPLITCONFIG
variable. Add a comment to explain this difference.
Change-Id: Ief38ab84f852ff24f896ec8bbf094aa737a172d9
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
The patch added in commit b7f92a0b6a (util/kconfig: Add patch to
move Kconfig deps to build/config) uses git diff formatting, which
is incompatible with quilt.
Change-Id: I95bfe6571e3a2cc2b38074b4338f1610a4c8a595
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Now that the next generation of APUs is officially announced, we can
unmask morgana.
The chip formerly known as Morgana is actually Phoenix.
Surprise!
This patch just changes the name across the entire codebase.
Note that the fw.cfg file will stay pointing to the
3rdparty/amd_blobs/morgana/psp directory until the amd_blobs_repo is
updated.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ie9492a30ae9ff9cd7e15e0f2d239c32190ad4956
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71731
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TCPA usually refers to log described by TPM 1.2 specification.
Change-Id: I896bd94f18b34d6c4b280f58b011d704df3d4022
Ticket: https://ticket.coreboot.org/issues/423
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
`make help` does not execute successfully because a quoted string is
unterminated. Fix that.
Change-Id: I643fde1270a154ba523eb21522dcf5f6d4023110
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
IFDv1 always has 8 regions, while IFDv2 always has 16 regions.
It's platform specific which regions are used or are reserved.
The 'SPI programming guide' as the name says is a guide only,
not a specification what the hardware actually does.
The best to do is not to rely on the guide, but detect how many
regions are present in the IFD and expose them all.
Very early IFDv2 chipsets, sometimes unofficially referred to as
IFDv1.5 platforms, only have 8 regions. To not corrupt the IFD when
operating on an IFDv1.5 detect how much space is actually present
in the IFD.
Fixes IFD corruption on Wellsburg/Lynxpoint when writing a new
flash layout.
Change-Id: I0e3f23ec580b8b8402eb1bf165e3995c8db633f1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Update and also adjust configs so that they work with NixOS 22.11.
Change-Id: Ia0fed68f5449ccf56b25660f5cdbc8c239064748
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
python3-setuptools installed via apt-get is not currently working to
build dtc from git.kernel.org. Falling back to setuptools version
58.2.0 allows it to build again.
The failure message was:
/usr/lib/python3/dist-packages/setuptools/installer.py:27:
SetuptoolsDeprecationWarning: setuptools.installer is deprecated.
Requirements should be satisfied by a PEP 517 installer.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I04cb6d776c3748f9a4b0cfc4ffd4f46458560d3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71500
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add support to write EFS and AMDFW body to separate files. This is done
through passing an optional --body-location parameter to the amdfwtool.
If that option is not passed, then EFS will be written in the same file
as the AMDFW body. This will help to keep the minimum data to be
loaded/mapped from CBFS in PSP verstage.
BUG=None
TEST=Build and boot to OS in Skyrim.
Change-Id: I79325c81394cf8a0c663752d094adf6660896127
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70778
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Both the tegra builds and the gitconfig tests are causing issues.
They're disabled until someone fixes them.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I1ed272e3579a2e7cdd6b58df24e719410d47082c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
coreboot has been keeping a mirror of all the toolchain packages used
for releases for quite a while now. This adds an option to fetch the
packages from the coreboot mirror directly to buildgcc.
This can help with both our releases and when one of the various
servers experiences interruptions or changes a path.
To do this, the URL and filename needed to be split apart, which led to
quite a few changes in the buildgcc script.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I7df58dca152e7bfe9fde34d290e05b52515b20d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Martin Roth