There were some issues with the current Linuxboot Makefiles.
- multithreaded compilation didn't work, because some prerequisites
were missing
- initramfs wasn't added for x86 qemu boot.
- riscv support was incomplete
It began with separate patches, but resulted in a clean up patch, that
is hard to separate. The most important changes are the following:
- Instead of phony targets, actual files are now used as prerequisites
- riscv can now be used as target
- initramfs works now also for x86
- instead of querying the most recent version from the internet, I set a
known working version (because I tested it) that can be customized
and/or upgraded in the future. The reasons:
- querying the version from the internet requires a constant
connection to the internet even after linux kernel is already
build (aka subsequent builds).
- one usually wants to use a known working version, but optionally
still have the posibillity to choose a custom one. This patch
introduces this possibility in its most simple form.
- I removed as much ifeq statements as possible and moved that
responsibility to Kconfig, because they tend to make the
Makefile less readable.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I25e757108e0dd473969fe5a192ad0733f1fe6286
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76150
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Makefile was passing `CONFIG_SMMSTORE_v2` which doesn't exist.
Correct this to `CONFIG_SMMSTORE_V2`.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I984d2155143c14cb4a347ed24688b9ea492f7f8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76317
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
It seems like the default branch for coreboot's Memtest86+ fork was
renamed from 'master' to 'main'.
TEST: Memtest builds correctly when selecting 'Main' for the Memtest86+
version option.
Change-Id: I269249518019f5d0d12c57f1c14012abca86b48b
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76100
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This add's an option to use EDK2's Universal Payload instead
of the standard UefiPayloadPkg. Universal Payload requires
a ShimLayer, to build the required HOBs and pass them to Universal
Payload.
The ShimLayer is built to encompass UniveralPayload, so only
one ELF binary is added to coreboot.
Universal Payload is based on Intel's USF specification:
https://universalscalablefirmware.github.io/documentation/
This has been added with the repository pointing to
https://github.com/starlabsltd. The required ShimLayer patches
will be merged into edk2 master once corresponding coreboot
patches are merged.
This is because the EDK2 engineers believe it is an impossible
task to patch coreboot to build and use Universal Payload.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I17cc86d5eac0d5d91551ba5bea73fbc07ebdf0d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65934
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Hook up edk2 build flag PcdPcieResizableBarSupport to coreboot
Kconfig CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I5cc12d32c5e132b9f99ec650377d7683377c2a9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74926
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Rather than requiring another Kconfig symbol to be set, reuse the same
`make V=1` command argument. This simplifies rebuilds with a single
point of reference.
Also, this means that coreboot doesn't have to be rebuilt due to Kconfig
changes.
Change-Id: I9eba86b234768641a215095b8657e9d07832b1b5
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Remove the ABOVE_4G_MEMORY option as the option was removed in edk2
in commit dc5f2905ebfdf68ae28ce1081d435af0f8641dd9 (UefiPayloadPkg:
Always build MemoryTypeInformation HOB for DXE GCD
- https://github.com/tianocore/edk2/pull/4231).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8d5ee79ef3f7ecfcd1463c612aad2e3d629df22a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74336
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Now that MrChromebox's default edk2 branch supports Secure Boot, add a
Kconfig to enable it, and do so by default when MrChromebox's branch
is used and SMMSTORE_V2 is enabled (which is a prerequisite).
TEST=build/boot google boards link, panther, lulu,reef, ampton, akemi,
and banshee, verify Secure Boot options available in payload, Secure
Boot status reported properly by Linux/Windows.
Change-Id: I4be58c3315cabe08729d717c59203fdc6a3e2958
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74869
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To quote the gnu make manual: "A phony target is one that is not really
the name of a file; rather it is just a name for a recipe to be executed
when you make an explicit request. There are two reasons to use a phony
target: to avoid a conflict with a file of the same name, and to improve
performance."
Change-Id: I337f4f2e0257a75ba204d21f8aa84292e8233082
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74309
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add possibility to clone edk2-platforms repository. Some edk2
repositories may use modules from edk2-platforms which contains
various feature packages for Intel platforms, e.g VT-d driver if DMA
protection is enabled.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iabd0793dfdcb95260046dc992ff30ef581159db9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68872
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Yabits is no longer maintained and git repo is archived.
Yabits has not been maintained for a long time,
the project is apparently closed.
Change-Id: Ida0bb79342448510d2c309339fabbe8066eca73c
Signed-off-by: Elias Souza <eliascontato@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
For recent X86 CPUs, the 0x15 CPUID instruction will return Time Stamp
Counter Frequence. For CPUs that do not support this instruction, EDK2
must include a different library which is the reason why this must be
configured at build time.
If this is enabled, and the CPU doesn't support 0x15, it will fail to
boot. If is not enabled, and the CPU does support 0x15, it will still
boot but without support for the leaf. Consequently, disabled it by
default.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4f0f43ce50c4f6f7eb03063fff34d015468f6daa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Until recently, there were two options to build edk2, UefiPayloadPkg and
CorebootPayloadPkg. Now, there is only one, UefiPayloadPkg but soon,
there will be Universal Payload.
It makes more sense, as the official edk2 repository doesn't work with
coreboot, to have the build target and repository separate. That will
allow for building either UefiPayloadPkg or Universal Payload from the
official repository, MrChromebox' fork or a custom repository.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If7f12423058ef69838741f384495ca766ccea083
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Convert UefiPayloadPkg (UEFIPAYLOAD.fd) to a file target.
There is no functional change here, it just avoids it being copied
out of the build dir, into an output directory and then into build.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iff097f6f1e715c697c33c50c395d7c1b88cc6280
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66360
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current edk2 makefile will work in a directory that's name is
derived from the repository, such as `mrchromebox` or `starlabsltd`.
Move this under a directory, so that it can be ignored by git and
so that the makefile can be adjusted to use file targets, rather
than phony recipes with wildcards.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If0c80dbc59130f229b78cab9578115e14172301d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66356
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
coreboot uses TianoCore interchangeably with EDK II, and whilst the
meaning is generally clear, it's not the payload it uses. EDK II is
commonly written as edk2.
coreboot builds edk2 directly from the edk2 repository. Whilst it
can build some components from edk2-platforms, the target is still
edk2.
[1] tianocore.org - "Welcome to TianoCore, the community supporting"
[2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform
firmware development environment for the UEFI and UEFI Platform
Initialization (PI) specifications."
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Recent changes to both coreboot and edk2 means that UefiPayloadPkg
seems to work on all hardware. It has been tested on:
* Intel Core 2nd, 3rd, 4th, 5th, 6th, 8th, 8th, 9th, 10th,
11th and 12th generation processors
* Intel Small Core BYT, BSW, APL, GLK and GLK-R processors
* AMD Stoney Ridge and Picasso
This includes the problematic Lenovo X230s. The most likely fixes are:
* Configuring the PCI Base and Length in edk2
* Fixes to the HostBridgeLib in edk2
* Adjustment to the SD/eMMC initialisation timeout
This means we can now remove the already deprecated option for
CorebootPayloadPkg and the legacy 8254 timer build option.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ice7b7576eb3d32ea46e5138266b7df3fbcdcf7ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
SMMSTORE support in edk2 was not allowed in upstream edk2
as it was bootloader specific.
Shortly, it will be built from edk2-platforms and then,
it will be retired.
For now, the patches exist in the MrChromeBox fork (TIANOCORE_UEFIPAYLOAD), so enable
these by default when SMMSTORE_v2 is enabled.
Change-Id: I1861bf739c2e25f661b4f06a303348f0537dc8b3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65867
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Bind the PCDs that allow edk2 to use the whole display to a
Kconfig option called TIANOCORE_FULL_SCREEN_SETUP.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic977a199f3b308c566391e37f126c4fe518b2eb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This caused edk2 serial output to be disabled 100% of the time.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If272369b405e7745fe82f49026cbed0abc50f355
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66160
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Hook up edk2 build options PCIE_BASE_ADDRESS and PCIE_BASE_LENGTH to
CONFIG_ECAM_MMCONF_BASE_ADDRESS and CONFIG_ECAM_MMCONF_LENGTH.
This patch has been reviewed upstream but not yet merged (2022/07/08).
It won't cause any problems for any existing branches or forks that do
not have this build option hooked up.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie5d50cc4619354d3c98adf6cde12c192be759869
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
ConSplitterDxe uses the intersection of all outputs, which includes
serial, for the list of supported text modes. When serial output is
supported, this slows down performance and limits the size of
FrontPage.
Only enable edk2's serial support when it's a debug build as
it's the only case where there will be debug output.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic3633767dabb3543e865aa65c4101840a7b69cc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
The u-root toolkit dropped the original uinit bootloader in the master
branch and respectively the systemboot-option in templates.go. In
consequence the LinuxBoot builds will boot into the u-root shell and
waiting for input. This commit enables the reuse of the -uinitcmd flag
to specify a command, which runs after the u-root init-process.
Systemboot as a bootloader wrapper will mimic a BIOS/UEFI boot device
selection. Other preselections, i.e. stboot and boot2 are implemented as
well. Custom strings or programs can be set as well, but they cannot
contain program flags. E.g. 'fbnetboot -class linuxboot' will not work,
because they aren't symlinkable.
This commit and its respective LinuxBoot builds with systemboot, none
and one custom option have been tested successfully on a UP squared
single board computer with the intended behavior.
Change-Id: I4ac3409040ea77a1836f90f43fba07d2cd05a952
Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Currently, custom TianoCore builds are allowed, but those may need
different parameters. Add a Kconfig option to specify additional
parameters to be appended to build command.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I025459ae94592103b4be0c68b422100b7c649d34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
coreDOOM is a port of DOOM to libpayload, based on the doomgeneric
source port. It renders the game to the coreboot linear framebuffer,
and loads WAD files from CBFS.
Tested with QEMU i440fx/q35 and a Dell Latitude E6400 using the
libgfxinit provided linear framebuffer.
Project page: https://github.com/nic3-14159/coreDOOM
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Change-Id: Ice0403b003a4b2717afee585f28303c2f5abea5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Also known as "SeaGRUB", running GRUB2 atop SeaBIOS proves to be a
useful configuration, since SeaBIOS has improved its hardware
compatibility. For example, some USB drive can work under SeaBIOS but
do not work under native GRUB2, and GRUB2 can use BIOS call (provided
by SeaBIOS) as a fallback method to access hardware if it is present.
But more option is added addition to "SeaGRUB": now GRUB2 and SeaBIOS
can be built as secondary payloads, and "SeaGRUB" is now implemented
as "Primary SeaBIOS + Secondary GRUB2 (selected) + config files".
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: Ie681fa231abfe4a8f1e4510b3c17957550a9d2f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
By default, edk2 allows 1000000μs for SD Card Readers and eMMC to
initialize which is excessive and causes a boot delay. This makes
the value configurable and uses a default of 1000μs which is sufficient
for the majority of readers. The value of 1000μs was hardcoded in
MrChromeBox's fork for around 2 years with no reported issues.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I873bcddf6f37a9eaae5c84991b3996d51fb460d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add TIANOCORE_PRIORITIZE_INTERNAL which, when enabled, will build edk2
with boot from internal devices before external devices.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib1f73c8f3f2f2376cdc197b58d259446dc5f0138
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add TIANOCORE_HAVE_EFI_SHELL, which when enabled, will build edk2
with the EFI Shell binary.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1272f514e3f5becfe1fddd58ca0d820c5d1c1b54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Adds TIANOCORE_FOLLOW_BGRT_SPEC which, when enabled, will follow
the BGRT Specification implemented by Microsoft and the Boot Logo
will be vertically centered 38.2% from the top of the display.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If508166fe657d1cc032dd09a0fa231c7b60d9846
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add TIANOCORE_BOOT_MANAGER_ESCAPE which, when enabled, will use
Escape as the hot-key to access the Boot Manager. This replaces
the default key of F2.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1e60d116367542f55f0ffa241a6132e4faabe446
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Rework edkii makefile so that the various build options are
unified between CorebootPayloadPkg, uefipayload_202107 and
upstream.
This sets the project directory based on the git repository name
i.e. https://github.com/mrchromebox/edk2 becomes mrchomebox
Also builds to $(obj)/UEFIPAYLOAD.fd and allows using a commit
ID without a branch.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3cc274e7385dd71c2aae315162cc48444b7eaa5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Martin Roth - Personal <martinroth@google.com>
Add an option to build skiboot as a payload. This makes QEMU Power9
board simpler to use as skiboot is necessary anyway.
Change-Id: I0b49ea7464c97cc2ff0d5030629deed549851372
Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com>
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
1. Fix the inconsistence of the target path of U-Boot payload
between Kconfig and Makefile.inc.
2. Perform full clone (to the destined commit) in order to get
tags.
3. Move stable commit id of U-Boot payload from Makefile to
Kconfig, and make prompt consistent with it.
Change-Id: Ic0f11c16274456a452a0422e19fab0c61d8b5d5b
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60028
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The u-boot.bin file should be used, rather than u-boot-dtb.bin
While they are often the same, the -dtb version is really just for
legacy use now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: I5558ed94c7dd6cc57ceb835fe367bfa050ad2150
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This doesn't work at present, merely printing an error when U-Boot is
selected as a payload. This is because it adds a file into the U-Boot
tree which makes U-Boot's build system think that the tree is unclean.
Update the rules to put the tag file outside the source tree. Use an
out-of-tree build for U-Boot to avoid changing the source tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: I24d6545b54f97afeefaca3ffed79eec2e7afacb4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Currently, the MMCONF Kconfigs only support the Enhanced Configuration
Access mechanism (ECAM) method for accessing the PCI config address
space. Some platforms have a different way of mapping the PCI config
space to memory. This patch renames the following configs to
make it clear that these configs are ECAM-specific:
- NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT
- MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT
- MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS
- MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER
- MMCONF_LENGTH --> ECAM_MMCONF_LENGTH
Please refer to CB:57861 "Proposed coreboot Changes" for more
details.
BUG=b:181098581
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max
Make sure Jenkins verifies that builds on other boards
Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Some older devices, like the x230 Thinkpad, do not boot with the
newer Tianocore UefiPayloadPkg build target, and cannot easily be
debugged without serial UART output. As a stopgap solution, re-add
the older (now deprecated/removed) CorebootPayloadPkg build target.
This partially reverts commit d3b49b4c,
"payloads/Tianocore: Update default build target, simplify build options"
Change-Id: I81490c277626fc69d95920868d80cb24c0763de4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Add Kconfig option TIANOCORE_ABOVE_4G_DECODE to pass build option to
edk2 to enable or disable "Above 4G Decode". Disabling allows certain Linux
distributions to boot such as Qubes, Zorin and Proxmox.
Requires commit `2f6d4cbcc7fa49462e607baed7626524ccd59ad3` that is
present in the `uefipayload_202107` branch of MrChromebox's edk2
repository.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia3b1d15196c0ec611431af29031682fea626d19d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
FILO allows to configure a line to autoboot. Hook this up into
coreboot’s build system.
TEST=Configure coreboot for QEMU i440fx with FILO as payload and
configure:
CONFIG_FILO_MASTER=y
CONFIG_FILO_USE_AUTOBOOT=y
CONFIG_FILO_AUTOBOOT_FILE="hda1:/vmlinuz root=/dev/sda1 console=tty0 console=ttyS0,115200 initrd=hda1:/initrd.img"
CONFIG_FILO_AUTOBOOT_DELAY=5
Boot Debian image with:
qemu-system-x86_64 -bios /dev/shm/coreboot/build/coreboot.rom -L /dev/shm -enable-kvm -smp cpus=2 -m 1G -hda /dev/shm/debian-32.img -serial stdio -net nic -net user,hostfwd=tcp::22222-:22
Change-Id: Id167e9a144bf466da87469108002672b299b702a
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Logging to coreboot cbmem, instead of a serial console, was
added to MrChromebox's uefipayloadpkg branch. Add a Kconfig
option to enable this, and restrict it to the UEFIPAYLOAD
payload option, since this feature does not exist in upstream
edk2.
Change-Id: Idef125235dc7ba885eb22ac69c6f752588a9e295
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Drop the deprecated COREBOOTPAYLOAD option, and replace it with MrChromebox's
updated UefiPayloadPkg option. Simplify the Kconfig options to make it easier
to build from upstream edk2 master. Drop the TIANOCORE_USE_8254_TIMER Kconfig
option since it applied only to CorebootPayloadPkg. Clean up the Makefile now
that we're only building from a single Tianocore package/target.
Test: build/boot qemu Q35 target with both UefiPayload and Upstream options.
Change-Id: If545fbd0c30be6dcc6ff43107b80980fa23a527e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54019
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
They all operate on that file, so just add it globally.
Change-Id: I953975a4078d0f4a5ec0b6248f0dcedada69afb2
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Target added to INTERMEDIATE all operate on coreboot.pre, each modifying
the file in some way. When running them in parallel, coreboot.pre can be
read from and written to in parallel which can corrupt the result.
Add a function to create those rules that also adds existing
INTERMEDIATE targets to enforce an order (as established by evaluation
order of Makefile.inc files).
While at it, also add the addition to the PHONY target so we don't
forget it.
BUG=chromium:1154313, b:174585424
TEST=Built a configuration with SeaBIOS + SeaBIOS config files (ps2
timeout and sercon) and saw that they were executed.
Change-Id: Ia5803806e6c33083dfe5dec8904a65c46436e756
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49358
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Maximilian Brune