Use the macro for GPP_E22_IRQ instead of the ACPI code so it
can be removed.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-sklrvp coreboot
Change-Id: I09bea748fea34072d4f8ad7470d37e423b7f63de
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 89069f5f318329182390cad679511547b7d2a6d5
Original-Change-Id: Iad181b4ce1c557ce8d17645431d8ba6f558bb837
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295171
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11427
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Early(romstage) SPI write protected status read(wpsr) functionality
was broken causing 2 sec timeout issue.Implementing HW Seq based rd
status operation in romstage.
BRANCH=NONE
BUG=chrome-os-partner:42115
TEST=Built for sklrvp and kunimitsu and tested using below command
flashrom -p host --wp-enable [this should enable WP on flash chip]
Read using romstage SPI.c. WPSR=0x80 (CB is reading Bit 7 as locked)
flashrom -p host --wp-disable [this should disable WP on flash chip]
Read using romstage SPI.c. WPSR=0x00 (CB is reading Bit 7 as unlocked)
Change-Id: I79f6767d88f766be1b47adaf7c6e2fa368750d5a
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 4b798c44634581ebf7cdeea76c486e95e1f0a488
Original-Change-Id: I7e9b02e313b84765ddfef06724e9921550c4e677
Original-Signed-off-by: Subrata <subrata.banik@intel.com>
Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/294445
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11423
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This is needed to fix error in depthcharge:
src/vboot/util/flag.c:38 flag_fetch(): Don't have a gpio set up
for flag 3.
BUG=chrome-os-partner:44214
TEST=Verify depthcharge prints EC ID on boot up
BRANCH=None
Change-Id: Ia2d88b8427e54e2dc9e6c9abecc95fd7656abb66
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 142b156c72ceedfbd4bf3f54c0cb1128c0fad5a3
Original-Change-Id: I7e7a7d1b92bc1ee2c5ebac8de6946550ddd68a68
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/294715
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11421
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Move the gpio pad configuration prior to SiliconInit()
in case there are dependencies of the pads being configured
in prior to SiliconInit().
BUG=chrome-os-partner:43522
BUG=chrome-os-partner:43492
BRANCH=None
TEST=Built and booted glados.
Change-Id: I84f8e965bf205a4945b14a63fa8074953750f785
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 5cce5347449f69ac6cf7030ea3b91d3f8b4cc7f9
Original-Change-Id: I18cd33a455d5635a866abb76142cab516b04f446
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294642
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11420
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On proto2 boards the kepler device has its reset line pulled up
to one of its IO rails with a zener in between. This results in the
device not being visible at MemoryInit() time because for some
reason FSP is doing PCIE configuration/probing in that path. Hack
around the broken FSP logic by configuring the pads for kepler's
power and clkreq.
BUG=chrome-os-partner:44326
BRANCH=None
TEST=Built and booted glados. lscpi shows the device on bus 2.
Change-Id: I543eb3ccd3ab5ffacd6efc959e6e2f7a88de78b3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 67f6b57487e8724b469f74870e0083d4e1dac4d2
Original-Change-Id: I7fe4a707f9321b7bdec4b4be729c5d0dcce65f6e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294810
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11419
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Export the proper GPIO for EC_IN_RW so it can be picked up and
used by depthcharge/vboot.
BUG=chrome-os-partner:43072
BRANCH=none
TEST=build and boot on glados P2
Change-Id: I32d338ef424086ec9701900e976bd0dffe4637a0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: dd983c84de0c3b896b20d38438a3285cfcaf7e56
Original-Change-Id: I77f7d3a0c0d733302b81273d96026d39b001ed19
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294712
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11418
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The RMT flag that was attempting to disable saved training to
force a full memory train was happening too late. In testing
I was actually hitting a case where FSP was training every time
but it was not because it was properly being told to.
This moves the check of the RMT flag from devicetree to happen
ealier, before it is actually consumed by romstage_common().
BUG=chrome-os-partner:40635
BRANCH=none
TEST=do both power off+on and warm resets to ensure that FSP
is doing a full memory train every time with RMT enabled.
Change-Id: Icf36e7b1ae20e08f6bc24bf832498d69b37dee92
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: f3fa3846d51dec65f22f018acc8fb8c4d18688a7
Original-Change-Id: I2128b4a24bb8b2c8ddcb792c09b6fb0284d1fda4
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294177
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11417
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The previously driven TX state of the buffer was not
being cleared before or'ing in the new value. Fix this
oversight.
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built and booted glados. Also dumped assembly and saw the
masking happen.
Change-Id: I74ea469564d37d6b29e9481b0ea704f04f54ac30
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: d399e8b32b30b8b2275bb6ff8dd24f7d5cfeadda
Original-Change-Id: I341b396af5de20ffeeb2e42066b224dd54251793
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294541
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11416
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
RMT is useless if the memory does not do a full training pass,
and since FSP does not seem to handle that case itself have
coreboot not pass in a valid set of saved training data so FSP
will do a full memory train.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot twice on glados with p2 and RMT enabled
and see it do a full memory train on each boot.
Change-Id: Ia4f29a937e726a5a676f056ce8970086988da5b6
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: f01e99204409899d4adbaebbe221b0348975cfa6
Original-Change-Id: I0bb193c5f3c9206a67315906745aad96a95b3f74
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294067
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11414
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The SOC handler for memory init params is only taking UPD
as an input which does not allow it to use romstage_params.
In addition the UPD input is called params which is confusing
so rename it to upd so romstage_params can be passed properly.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados p2
Change-Id: I414610fee2b5d03a8e2cebfa548ea8bf49932a48
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: db94d6f3e6cad721de2188a136df10ccf66aff6a
Original-Change-Id: I7ec15edd4a16df121c5967aadd8b2651267ec773
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294066
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11413
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The BUNIT controls the policy for read/write access to physical
memory. For the SMRAM range the policy was not allowing dirty
evictions to the SMRAM when the core causing the eviction was not
in SMM mode. This could happen when the SMM handler dirtied a line
and then RSM'd back into non-SMM mode. The cache line was dirtied
while in SMM mode, but when that particular cache line was evicted
it would be silently dropped. Fix this by allowing the BUNIT to honor
writes to the SMRAM range while the evicting core is not in SMM mode.
The core SMRR msr provides the mechanism for disallowing general access
to the SMRAM region while it is not in SMM mode.
BUG=chrome-os-partner:43091
BRANCH=None
TEST=Run suspend_stress_test and ensure there is no hang SMI handler
on suspend-path.
Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Change-Id: Ie794aa3afd54b5e21d0d59a2a7388d507f233537
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 9c481ab339b4e5ab063e2c32b1f0a48b521142b2
Original-Change-Id: I3e7d41c794c6168eb2ad4eb047675bdb1728f72f
Original-Reviewed-on: https://chromium-review.googlesource.com/292890
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: http://review.coreboot.org/11412
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
CBFS_SIZE is living as a mainboard attribute. Because
of the Kconfig include ordering the SoC *cannot* set
the default.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=None
Change-Id: If34e8fd965573fdc7f57b63201dbcb5256e132d6
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: a820b11a0aa3b820c79b1f76b15370d969153175
Original-Change-Id: I7ba637e66878f5ae9caedb63fdd37ed7e375224e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289832
Original-Reviewed-by: Martin Roth <martinroth@google.com>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11410
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
We don't need the code in romstage, and it saves us a few #ifdefs.
Change-Id: I26d867566f07c7d80890cd01bf055be7497130d3
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11457
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It doesn't make sense to die() when printing information. In fact the
die() are protected by DISPLAY_HOBS config option. This can get
confusing, so replace die() calls with printk().
Also since these messages are designed to be informational, keep them
at BIOS_INFO log level.
Change-Id: Id75b9a54f4aea23074a7489d12809cc2da05f1cd
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11456
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
For some reason fsp 1.1 has a duplicate mechanism for saving
mrc data as soc/intel/common. Defer to the common code as all
the existing users were already using the common code.
BUG=chrome-os-partner:44620
BRANCH=None
TEST=Built and booted glados. Suspended and resumed.
Change-Id: I951d47deb85445a5f010d23dfd11abb0b6f65e5e
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Original-Commit-Id: 2138b6ff1517c440d24f72a5f399bd6cb6097274
Original-Change-Id: I06609c1435b06b1365b1762f83cfcba532eb8c7a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295236
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11454
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The code in mrc_cache.c doesn't check for the presence of 'mrc.cache',
and just returns hardcoded value for he location of he MRC cache. This
becomes a problem when there is a CBFS file at the same location,
which can get overwritten. A CBFS file is created to cover this region
so that nothing can be added there.
This has the advantage of creating a build time error if another cbfs
file is hardcoded over the same region.
The default location of the MRC cache is also moved to 4G - 128K to
ensure that it defaults to something within CBFS.
Change-Id: Ic029c182f5a2180cb680e09b25165ee303a448a3
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11440
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Aaron Durbin found that soc/common is already included as a subdir via
the wildcard in Makefile.inc:
subdirs-y += $(wildcard src/soc/*/*)
Since the entire file is protected by CONFIG_SOC_INTEL_COMMON, there
is no problem with including it for every platform. On the other hand,
when it is included by the skylake and braswell makefiles, any rule is
duplicated. As a result fix the braswell and skylake makefiles.
Change-Id: If5bad903c78dbce418852935ee55cdc7162b3b2d
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11439
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Whatever it is, it likely won't be cros/chromeos-2013.04 anymore.
Change-Id: I020b65a7406e3bef7d1c8fad8c530354b1f78819
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11438
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Add the now coreboot standard MMIO read/write accessors that were
already defined for other architectures but not x86.
This leaves the old read/write{b,w,l} variants in place as was done
on the other architectures, presumably to support old payloads that
have not been updated.
BUG=chrome-os-partner:43072
BRANCH=none
TEST=emerge-glados libpayload
CQ-DEPEND=CL:294711
Change-Id: I5ae3d755adcef0f6ff27aaa7c35a5b12ddc32e22
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: c09dd557050e3002fa5b8504980d72d4cb79a56c
Original-Change-Id: I58d928338335d3fe4bb7fe2bdc9c2967d8689118
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294565
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11405
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Seems like our transferred bytes calculation for OUT transfers that span
more than one packet had been wrong, and we just got lucky that we never
noticed it before. The HCTSIZ.xfersize register field we're reading only
counts bytes transferred by the last packet we sent.
OUT endpoints cannot have short transfers -- every transfer should
either finish all bytes we wanted to send or end in a proper error
condition. Therefore, in the absence of an error we can just conclude
that all input bytes have been transferred.
BRANCH=veyron
BUG=chrome-os-partner:35525
TEST=SMSC95xx netboot on Jerry now works.
Change-Id: I57349e697c428df6b56e2f6f62e87652ef1e7a94
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 0abee13b6d89dec12c6fff581ece1836393c7703
Original-Change-Id: Id0a127e6919f5786ba05218277705dda1067b8c3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293956
Original-Reviewed-by: yunzhi li <lyz@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11404
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds support to enable a linker workaround to a hardware
erratum on some early Cortex-A53 revisions. Since the linker option was
added very recently, we use xcompile to test whether the toolchain
supports it first. It is also guarded by a Kconfig since only a few
ARM64 SoCs will need this and it incurs a performance penalty.
BRANCH=none
BUG=none
TEST=Turned it on or off for Smaug and confirmed that it (dis)appeared
in verbose make output accordingly.
Change-Id: I01c9642d3cf489134645f0db6f79f1c788ddb00d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 57128785760c4dfa32d6e6d764756443a9323cb7
Original-Change-Id: Ia5dd124f484e38460d75fb864304e7e8b18d16b7
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294745
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11403
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Fix following compilation error.
LINK cbfs/fallback/verstage.debug
/bin/sh: verstage-objs: command not found
/usr/x86_64-pc-linux-gnu/aarch64-cros-linux-gnu/binutils-bin/2.24/ld.bfd.real: warning: cannot find entry symbol stage_entry; defaulting to 00000000000d7000
BRANCH=chromeos-2015.07
BUG=none
TEST=emerge-oak coreboot
Change-Id: I30e4c43625b2d1d076f24e8c2639ce951839661b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 2a8936cdf34d315f580819df682335b2998f044f
Original-Change-Id: I9afd57a5a868a348dff2c66cad0a8a09cdb2e911
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292557
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11402
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Need to save EmcBctSpare2 field to scratch register. Without it,
system may not resume from LP0 suspend.
BUG=chrome-os-partner:43797
BRANCH=none
TEST=able to suspend/resume >30 times on a known failed board
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 6d1623c4c791f79e097193dfbc4bc894ef63e230
Original-Change-Id: I53ebf8c4d4c7cd19827128a84fbd97a377d78ff7
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/294765
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-(cherry picked from commit ce38d902e889068d0068150c9352c2ecdb2f8815)
Original-Reviewed-on: https://chromium-review.googlesource.com/294864
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Change-Id: I2ff21afbe9278413033101877c2581df51913709
Reviewed-on: http://review.coreboot.org/11401
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
GPIO(0, B, 3) and GPIO(7, C, 5) are not actually connected,
GPIO(0, B, 4) is named differently.
BUG=chrome-os-partner:43031
TEST=Rialto should still boot just fine, USB should still work
BRANCH=master
Change-Id: I11879385de6e9b57ac28bcae699333beb5a0d64c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: a66bf1fd73ff8d15d4ec1a8f3602465941285c32
Original-Change-Id: Ib7d2baa6ed1ab38db786eb4d5e77316ad72cbfd4
Original-Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294713
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11400
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Without this, the leds would be stuck to whatever the pullup/down states the
pins come with on rk3288.
Ready2_LED, an orange led, is one of the leds in this state.
This might confuse some users thinking there's an error.
Turn all of them on instead.
Later on depthcharge will use the same LEDs to indicate dev mode status.
BUG=chrome-os-partner:44274
BRANCH=master
TEST=Boot firmware without anything else, note all leds on
Change-Id: I5cf19aabd2a59a61699ef491ae11424cf5a0c874
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 2e1a332a5653fb76bbf8fe624274ec64d2b443a5
Original-Change-Id: I4c4e8940dd9cf1ac0301ac00bfc5992ba16e1589
Original-Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294065
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11398
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
only modify the MR3 value, there will always be some mickey not working properly.
After enable ODT, we use many mickey do tests, now functioning properly.
BRANCH=None
BUG=chrome-os-partner:43626
TEST=My mickey now boots up
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 681c169d59f5638d35b777eb2b7543e3b0dd90c8
Original-Change-Id: Ieb2b8a56054f91b6be81260e4c574425fb72fed3
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293324
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Original-Commit-Queue: Douglas Anderson <dianders@chromium.org>
Original-Trybot-Ready: Douglas Anderson <dianders@chromium.org>
Original-Tested-by: Douglas Anderson <dianders@chromium.org>
Original-(cherry picked from commit 5397c2f32f5851b9f514b0bd2ae68999a77cabbf)
Original-Reviewed-on: https://chromium-review.googlesource.com/294126
Change-Id: Icb3c839bebebfcae54fc6e96e9958c7020d49eff
Reviewed-on: http://review.coreboot.org/11396
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
do_dcsw_op is coded as a label, it's possible that linker will place
do_dcsw_op on unaligned address. To avoid this situation, we declare
do_dcsw_op as a function. Also explicitly set the 2nd argument of
ENTRY_WITH_ALIGN(name, bits) to 2.
do_dcsw_op:
cbz x3, exit
c103d: b40003e3 cbz x3, c10b9 <exit>
mov x10, xzr
c1041: aa1f03ea mov x10, xzr
adr x14, dcsw_loop_table // compute inner loop address
BRANCH=none
BUG=none
TEST=build and check do_dcsw_op in elf file
Change-Id: Ieb5f4188d6126ac9f6ddb0bfcc67452f79de94ad
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 4ee26b76089fab82cf4fb9b21c9f15b29e57b453
Original-Change-Id: Id331e8ecab7ea8782e97c10b13e8810955747a51
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293660
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: http://review.coreboot.org/11395
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When power is cut/restored to audio block, mbist workaround must be reapplied
or I2S will not function. Handle this in lp0 resume firmware with the rest of
the mbist WAR. This sequence for audio is also present in boot block code for
T210.
BUG=chrome-os-partner:41249
BRANCH=None
TEST=lp0 suspend/resume with audio playback
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 84933da8188f8263c19f38ba37e88e32ca46cb3d
Original-Change-Id: Ia6432e8556ee64f528d94f2dc3279b152294e132
Original-Signed-off-by: Christopher Freeman <cfreeman@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293618
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Anatol Pomazau <anatol@google.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Anatol Pomazau <anatol@google.com>
Original-Tested-by: Anatol Pomazau <anatol@google.com>
Original-(cherry picked from commit 1e529c3e2ff929975fd654ef75396bc98d3b785c)
Original-Reviewed-on: https://chromium-review.googlesource.com/293886
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Change-Id: I3e72bc10f7e2bea2fa5f946e25803a7928ce9276
Reviewed-on: http://review.coreboot.org/11394
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Due to HDMI need to set dclk_rate to 27Mhz, and we can't
caclu a suitable config paramters for this rate, so we
need to multiple rate unless the vco larger then VCO_MAX.
When NPLL rate multiple to 54MHz, pll_para_config could
caclu a right paramters, and I have verify the clock jitter
is okay to HDMI output.
Jitter Reports:
Dclk Rate NPLL Rate nr/no/nf jitter Margin
27MHz 54MHz 2/10/45 449.0ps +51.0%
BRANCH=None
BUG=chrome-os-partner:42946
TEST=Mickey board, show right recovery picture on TV,
and 480p clock jitter test passed
Change-Id: Iaa0a6622e63d88918ed465900e630bdf16fde706
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 59f1552026889f61167cfeaec3def668ba709c10
Original-Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Original-Change-Id: Iab274b41f163d2d61332df13e5091f0b605cb65c
Original-Reviewed-on: https://chromium-review.googlesource.com/288416
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290331
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11393
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If an HDMI display is detected (EDID can be read), set the
display mode to 480p. If for some reason 480p is not supported
then we'll fall back to the automatically detected display mode.
BUG=chrome-os-partner:42946
BRANCH=firmware-veyron
TEST=dev mode screen shows up on Mickey at 480p resolution
Change-Id: I2c431eff6673392d3c09e1b66c66ba12ecc6eeb0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 76203a683c4501f368c50fe24101f68746ddb7f0
Original-Change-Id: I90dea37daa2d78628230d7d47f7ef0e917cbd7bb
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290554
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11392
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Assume that HDMI implies usage of an external display, and that we
want to try bringing up display if we can read an EDID.
BUG=chrome-os-partner:42946
BRANCH=firmware-veyron
TEST=none; need a display with corrupt EDID to test with
Change-Id: I11cc61140d905d70798a7b46db7847f3a1b3c886
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: ace7773623eac57f068ecd50baa9108ce028cf1b
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I9e22984a98b1a5f8cd9645b92dc9b87e8d968f01
Original-Reviewed-on: https://chromium-review.googlesource.com/293548
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11391
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch will let you to choose a favourite mode to
display, while not just taking the edid detail timing.
But not all modes are able to set, only modes that
are in established or standard timing, and we only
support a few common common resolutions for now.
BUG=chrome-os-partner:42946
BRANCH=firmware-veyron
TEST=tested dev mode on Mickey at 640x480@60Hz
Change-Id: I8a9dedfe08057d42d85b8ca129935a258cb26762
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 090583f90ff720d88e5cfe69fcb2d541c716f0e6
Original-Change-Id: Iaa8c9a6fad106ee792f7cd1a0ac77e3dcbadf481
Original-Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289671
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11390
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This ensures the output buffer is initialized before exiting
decode_edid() so that if the return value is ignored in higher-level
logic (like when dealing with external displays) we don't leave
the struct filled with garbage.
BUG=chrome-os-partner:42946
BRANCH=firmware-veyron
TEST=none
Change-Id: I557e2495157458342db6d8b0b1ecb39f7267f61f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: bb12dca133576543efa4d3bcc9aadf85d37c8b71
Original-Change-Id: I697436fffadc7dd3af239436061975165a97ec8c
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293547
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11389
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This replaces various timing mode parameters parameters with
an edid_mode struct within the edid struct.
BUG=none
BRANCH=firmware-veyron
TEST=built and booted on Mickey, saw display come up, also
compiled for link,falco,peppy,rambi,nyan_big,rush,smaug
[pg: extended to also cover peach_pit, daisy and lenovo/t530]
Change-Id: Icd0d67bfd3c422be087976261806b9525b2b9c7e
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: abcbf25c81b25fadf71cae106e01b3e36391f5e9
Original-Change-Id: I1bfba5b06a708d042286db56b37f67302f61fff6
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289964
Original-Reviewed-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11388
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There are serveral members of the edid struct which are never used
outside of the EDID parsing code itself. This patch moves them to a
struct in edid.c. They might be useful some day but until then we can
just pretty print them and not pollute the more general API.
BUG=none
BRANCH=firmware-veyron
TEST=compiled for veyron_mickey, peppy, link, nyan_big, rush, smaug
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I660f28c850163e89fe1f59d6c5cfd6e63a56dda0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: ee8ea314a0d8f5993508f560fc24ab17604049df
Original-Change-Id: I7fb8674619c0b780cc64f3ab786286225a3fe0e2
Original-Reviewed-on: https://chromium-review.googlesource.com/290333
Original-Reviewed-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11387
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The value of 0x4 (60 Ohm) apperas to be causing lots of problems.
Since 0x1 (34.3 Ohm) was _almost_ right, let's try 0x2 (40 Ohm) and
hope it's the sweet spot.
BRANCH=None
BUG=chrome-os-partner:43626
TEST=My mickey now boots up
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 06db96e00d39972edbaf8429cbe88bbc66804e15
Original-Change-Id: If8b7d51d058ae000c0af189a648c62fa38a872ac
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291121
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-(cherry picked from commit 0dabadca1ab3bb310f85646d020bdcf672014071)
Original-Reviewed-on: https://chromium-review.googlesource.com/291291
Change-Id: Id32790c894c09616e32503aa790fa294093eca8a
Reviewed-on: http://review.coreboot.org/11386
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This basically does the same thing for firmware what CL:290631
did in the kernel. We want to keep the modem off until it needs
to be used to avoid enumeration/detection issues.
BUG=chrome-os-partner:43271
BRANCH=none
TEST=needs testing
Change-Id: I3b63a77c732dc4895b728b30f1dd71210a9c0e90
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: a90ccd7fbffe44abe05e96341cc77067442c85e4
Original-Change-Id: I3516de1ea9160f7186ad7f5fb3b5d29ac73143b5
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290890
Original-Reviewed-by: Alexandru Stan <amstan@chromium.org>
Reviewed-on: http://review.coreboot.org/11385
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The NV security team requested that coreboot allocate a 128MB
region in SDRAM for VPR (Video Protection Region). We had
previously just disabled the VPR by setting BOM/SIZE to 0.
Once allocated, the VPR will be locked from further access.
The ALLOW_TZ_WRITE_ACCESS bit is _not_ set, as dynamic VPR config
is not supported at this time (i.e. trusted code can _not_ remap
or resize the VPR).
BUG=None
BRANCH=None
TEST=Built and booted on my P5 A44. Saw the VPR region in the
boot spew (ID:3 [f6800000 - fe800000]). Dumped the MC VideoProtect
registers and verified their values.
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: a7481dba31dc39f482f8a7bfdaba1d1f4fc3cb81
Original-Change-Id: Ia19af485430bc09dbba28fcef5de16de851f81aa
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/290475
Original-Reviewed-by: Hyung Taek Ryoo <hryoo@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Hridya Valsaraju <hvalsaraju@nvidia.com>
Original-(cherry picked from commit 9629b318eb17b145315531509f950da02483114f)
Original-Reviewed-on: https://chromium-review.googlesource.com/291095
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Change-Id: I19a93c915990644177c491c8212f2cf356d4d17d
Reviewed-on: http://review.coreboot.org/11384
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BL31 makes an assumption that TZDRAM always starts at its base. This
was not true in our case since coreboot page tables were located
towards the start of TZDRAM. Instead move page tables to the end, thus
satisfying the assumption that BL31 base is the base of TZDRAM as
well.
BUG=chrome-os-partner:42989
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: aabed336da6e9aea426650c5ca5977ccfc83a21b
Original-Change-Id: Ic4d155525dbb4baab95c971f77848e47d5d54dba
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/291020
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-(cherry picked from commit a57127f1655ef311b82c41ce33ffc71db5f9db35)
Original-Reviewed-on: https://chromium-review.googlesource.com/290987
Change-Id: Ie7166fd0301b46eb32f44107f7f782c6d79a278c
Reviewed-on: http://review.coreboot.org/11383
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The NV security team requested that coreboot allocate the NVDEC
and TSEC carveouts. Added code to set up NVDEC (1 region, 1MB)
and TSEC (2 regions, splitting 2MB), and set their lock bits.
Kernel/trusted code should be able to use the regions now.
Note that this change sets the UNLOCKED bit in Carveout1Cfg0
and Carveout4Cfg0/5Cfg0 (bit 1) to 0 in the BCT .inc files
(both 3GB and 4GB BCTs) so that the BOMs can be written.
Any future revisions to these BCT files should take this
into account.
BUG=None
BRANCH=None
TEST=Built and booted on my P5 A44. Saw the carveout regions
in the boot spew, and CBMEM living just below the last region
(TSEC). Dumped the MC GeneralizedCarveoutX registers and
verified their values (same as BCT, with only BOM/CFG0 changed).
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: a34b0772cd721193640b322768ce5fcbb4624f23
Original-Change-Id: I2abc872fa1cc4ea669409ffc9f2e66dbbc4efcd0
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/290452
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-(cherry picked from commit f3bbf25397db4d17044e9cfd135ecf73df0ffa60)
Original-Reviewed-on: https://chromium-review.googlesource.com/291081
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Change-Id: I924dfdae7b7c9b877cb1c93fd94f0ef98b728ac5
Reviewed-on: http://review.coreboot.org/11381
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Duncan Laurie