If EARLY_CONSOLE is not selected, the PCI function for EHCI
host controller must be configured in ramstage instead.
Change-Id: I20f7569f79484c744bc413450bfa139052f3580f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3383
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Without that commit, with CONFIG_PCI_OPTION_ROM_RUN_YABEL,
The VGA option rom doesn't init the right display:
it initializes the external display, where we have
a black scren(with backlight on).
This commit is based on the code of mainboard.c in
src/mainboard/roda/rk886ex.
Change-Id: I8457aaf0503e0efdf0fcba9ff5e8a07ac04c5ca6
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: http://review.coreboot.org/3265
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
First copy over from SeaBIOS git repo, then adapt for coreboot:
Disable cpu/pci hotplug bits. Disable dynamic pci window.
Both depend on stuff in the SSDT tables created by SeaBIOS.
Bits are left in, but deactivated via #if 0, so it's easier
to see the differences when diffing the coreboot tables with
the SeaBIOS tables.
Adapt dsdt DefinitionBlock.
Enable acpi table generation in acpi_tables.c.
With this patch linux boots successfully with ACPI enabled.
It's not bug-free though. Missing cpu detection leads to
funky messages like this one:
weird, boot CPU (#0) not listed by the BIOS.
and SMP most likely wouldn't work either.
Change-Id: Ic3803a6f1ef6d54c11cc4ca3844d3032a374ae6b
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/3342
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Port most of the functions found in ec/acpi/ec.c to ACPI Source Language
(ASL). These functions are used to control embedded controllers with the
standard ACPI interface (mostly through i/o ports 0x62 / 0x66).
The following methods are implemented and tested against the power
managements channels of a ITE IT8516E embedded controller:
* WAIT_EC_SC Wait for a bit in the EC_SC register
* SEND_EC_COMMAND Send one command byte to the EC_SC register
* SEND_EC_DATA Send one data byte to the EC_DATA register
* RECV_EC_DATA Read one byte of data from the EC_DATA register
* EC_READ Read one byte from ec memory (through cmd 0x80)
* EC_WRITE Write one byte to ec memory (through cmd 0x81)
To use the provided methods, one should include `ec/acpi/ec.asl` in the
EC device code. Prior doing so, two macros should be defined to identify
the used i/o ports:
* EC_SC_IO I/o address of the EC_SC register
* EC_DATA_IO I/o address of the EC_DATA register
Change-Id: I8c6706075fb4980329c228e5b830d5f4e9b188dd
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/3285
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Added support for Intel Atom cpu to msrtool
Fixed a cut&paste error in nehalem msr bits definition
It has been tested with a N455 cpu and msrtool output can be review at:
http://www.trillion01.com/coreboot/msrtool_atom.txt
Change-Id: I0ecf455b559185e2d16fa1a655bf021efc2ef537
Signed-off-by: Olivier Langlois <olivier@olivierlanglois.net>
Reviewed-on: http://review.coreboot.org/3351
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The DDI connector table and the PCIe Port List lookup table are
copied onto HEAP. This copy is not needed since these are lookup
tables used to define the platform configuration.
Change-Id: If4760f80e08faa8da4fd11337a3812f89cf805f9
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/3394
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add CONST modifiers to read-only pass-by-reference function
parameters in AGESA. This allows the use of "const" modifiers
on the declaration of lookup tables that are pass-by-reference.
These will be used to identify tables that are copied onto the
HEAP but don't need to be.
Change-Id: Ie1187a427804fddf47b935a110ad23931a3447a9
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/3393
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add boot cpu to the device tree. Figure the number of CPUs installed
(using the qemu firmware config interface) and add cpu devices for them,
so they show up in all generated BIOS tables correctly. This gets SMP
going.
Change-Id: I0e99f98942d8ca90150b27fc13c1c7e926a1a644
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/3345
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds a qemu x86 cpu chip. It has no initialization function
as this isn't needed on virtual hardware. A virtual machine can have
pretty much any CPU: qemu emulates a wide range of x86 CPUs (try 'qemu
-cpu ? for a list), also with 'qemu -cpu host' the guest will see a cpu
which is (almost) identical to the one on the host machine. So I've
added X86_VENDOR_ANY as wildcard match for the cpu_table.
Change-Id: Ib01210694b09702e41ed806f31d0033e840a863f
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/3344
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This driver communicates with the IT8516e on the Kontron KTQM77.
Since we don't know if the firmware and protocol are standard for
the chip or customized to the board, call it kontron/it8516e.
Change-Id: I7382172c6d865d60106c929124444821a07a5184
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/3390
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: Ica3afbf8277cb025251da7af181f8de0d0036b45
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/3389
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When I've first written this macro in 2011, the correct define for
verbose SMBus message was CONFIG_DEBUG_SMBUS_SETUP. This has since
been changed to CONFIG_DEBUG_SMBUS. I didn't catch that, and this made
the printsmbus macro always evaluate to an empty statement.
Use the proper CONFIG_DEBUG_SMBUS define. This makes printsmbus
functional again.
Change-Id: Iaf03354b179cc4a061e0b65f5b746af10f5d2b88
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/3379
Tested-by: build bot (Jenkins)
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Needed to make 'register "gpo" = ...' work.
While being at it add comments saying which device is which.
Change-Id: I911d5e4a7b6c7abf4ad73e863ab201e9e55ee0d4
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/3346
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The qemu debugcon port returns 0xe9 on reads in case the device is
present. Use that for detection and write console output to the
port only in case the device is actually present.
Change-Id: I41aabcf11845d24004e4f795dfd799822fd14646
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/3338
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
qemu has a special device to pass configuration information
from qemu to the firmware. This patch adds initial support
the interface, namely some infrastructure, detection code and
a function to query the number of CPUs.
Change-Id: I43ff5f4fbf12334a91422aa38f514a82a1d5219e
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/3343
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This reverts commit eed28f97b3.
For whatever reason, the dependencies were lost in Gerrit and the
commit [1] was submitted without its dependencies. As a result
buidling the ASUS F2A85-M fails now [2] and therefore commits
based on this commit fail to pass the buid tests by Jenkins.
[…]
Created CBFS image (capacity = 8387656 bytes)
LINK cbfs/fallback/romstage_null.debug
CC cbfs/fallback/coreboot_ram.debug
coreboot-builds/asus_f2a85-m/generated/coreboot_ram.o:(.data+0x16b9c): undefined reference to `GnbIommuScratchMemoryRangeInterface'
collect2: error: ld returned 1 exit status
make: *** [coreboot-builds/asus_f2a85-m/cbfs/fallback/coreboot_ram.debug] Error 1
make: *** Waiting for unfinished jobs....
coreboot-builds/asus_f2a85-m/mainboard/asus/f2a85-m/buildOpts.romstage.o:(.data+0x3d8): undefined reference to `GnbIommuScratchMemoryRangeInterface'
collect2: error: ld returned 1 exit status
make: *** [coreboot-builds/asus_f2a85-m/cbfs/fallback/romstage_null.debug] Error 1
[…]
Therefore revert the commit to get the tree working again and
submit this patch with its dependencies again.
[1] http://review.coreboot.org/#/c/3317/
[2] http://qa.coreboot.org/job/coreboot-gerrit/6618/testReport/junit/(root)/board/i386_asus_f2a85_m/
Change-Id: I911755884da09eb0a0651b8db07ee2a32e6eaaaa
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3373
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Do the setup for all PCI slots, not only the third.
Also remove the bogus message, as slot 3 may carry
any device, not only NICs.
This makes IRQ setup simliar to SeaBIOS.
SeaBIOS assignments (with patch for logging added,
and a bunch of pci devices for testing purposes):
PCI IRQ [piix]: bdf=00:01.3 pin=1 line=10
PCI IRQ [piix]: bdf=00:03.0 pin=1 line=11
PCI IRQ [piix]: bdf=00:04.0 pin=1 line=11
PCI IRQ [piix]: bdf=00:05.0 pin=1 line=10
PCI IRQ [piix]: bdf=00:06.0 pin=1 line=10
PCI IRQ [piix]: bdf=00:1d.0 pin=1 line=10
PCI IRQ [piix]: bdf=00:1d.1 pin=2 line=10
PCI IRQ [piix]: bdf=00:1d.2 pin=3 line=11
PCI IRQ [piix]: bdf=00:1d.7 pin=4 line=11
Coreboot assignments without this patch:
Assigning IRQ 11 to 0:3.0
Coreboot assignments with this patch:
Assigning IRQ 10 to 0:1.3
Assigning IRQ 11 to 0:3.0
Assigning IRQ 11 to 0:4.0
Assigning IRQ 10 to 0:5.0
Assigning IRQ 10 to 0:6.0
Assigning IRQ 10 to 0:1d.0
Assigning IRQ 10 to 0:1d.1
Assigning IRQ 11 to 0:1d.2
Assigning IRQ 11 to 0:1d.7
Change-Id: Ie96be39185f2f1cbde3c9fc50e29faff59c28493
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/3334
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
X86EMU_DEBUG_TIMING is needed for producing i915tool
compatible output. So add its dependencies to the
i945’s Kconfig in order to be able to use X86EMU_DEBUG_TIMINGS,
which depends on HAVE_MONOTONIC_TIMER which
LAPIC_MONOTONIC_TIMER provides/selects.
Note that UDELAY_LAPIC is already selected by the Intel CPU.
Change-Id: Ie834ebc92e527eb186a92b39341ebd0a08889fb0
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: http://review.coreboot.org/3356
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This patch was made by listenning to what Ron Minnich told
me to do on #coreboot IRC channel on Freenode with my
adaptations on top.
i915tool is at https://code.google.com/p/i915tool/ ,
the one in coreboot is outdated.
Change-Id: I13cd684f4c290114836fbd7babd461153e8d6124
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: http://review.coreboot.org/3277
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
viatool is a utility for extracting useful for extracting certain configuration
bits on VIA chipsets and CPUs. It is a fork of inteltool.
viatool is currently focused on "quirks". Quirks are device configurations that
cannot be accessed directly. They are implemented as hierarchical configurations
in the PCI or memory address spaces (index/data register pairs). Such
configurations refer to hardware parameters that are board specific. Those
parameters would otherwise be difficult to extract from a system running the
vendor's firmware.
viatool also preserves inteltool's MSR dumps. VIA CPU and Intel CPU MSRs are
nearly identical.
Change-Id: Icbd39eaf7c7da5568732d77dbf2aed135f835754
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/1430
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The MARK_GRAPHICS_MEM_WRCOMB was spreading like a cancer
since it was defined in sandybridge. It is really
more of an x86 thing however, and we now have
three systems that can use it.
I considered making this more general, since it technically
can apply to PTE-based systems like ARM, and maybe we should.
But the 'WRCOMB' moniker is usually closely tied to the x86.
Change-Id: I3eb6eb2113843643348a5e18e78c53d113899ff8
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/3349
Tested-by: build bot (Jenkins)
After removing power and the CMOS Battery, putting it back
and booting coreboot we have:
# ./nvramtool -a
boot_option = Fallback
last_boot = Fallback
baud_rate = 115200
debug_level = Spew
hyper_threading = Enable
nmi = Enable
boot_devices = ''
boot_default = 0x40
cmos_defaults_loaded = Yes
lpt = Enable
volume = 0xff
tft_brightness = 0xbf
first_battery = Primary
bluetooth = Enable
The code for handling the invalid CMOS space in mainboard.c
is now useless and so it was removed.
Change-Id: Ic57a14eeeea861aa034cb0884795b0152757bf5b
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: http://review.coreboot.org/3335
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Add the Mobile Panther Point (PPT) AHCI controller (DEVID 0x1e03) to
the list of tested controllers. Also comment the only other listed
controller (Mobile ICH9).
The PPT AHCI controller was tested with a QM77 chipset on a Kontron
KTQM77 board.
Change-Id: Ia396761411f4f9289af11ec8e1b144512b2fc126
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/3361
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Early SMBUS code with similar functionality is duplicated for all
southbridges. Add a generic SMBus API (function declarations) designed to
unify the early SMBus structure.
This patch only adds the API. It does not implement any hardware-specific
bits.
Change-Id: I0861b7a3f098115182ae6de9f016dd671c500bad
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/143
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
MRS commands are used to tell the DRAM chip what timing and what
termination and drive strength to use, along with other parameters.
The MRS commands are defined by the DDR3 specification [1]. This
makes MRS commands hardware-independent.
MRS command creation is duplicated in various shapes and forms in any
chipset that does DDR3. This is an effort to create a generic MRS API
that can be used with any chipset.
This is used in the VX900 branch.
[1] www.jedec.org/sites/default/files/docs/JESD79-3E.pdf
Change-Id: Ia8bb593e3e28a5923a866042327243d798c3b793
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/3354
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
While we had support for updating microcode on the VIA Nano CPUs for a
while now, we never included the actual microcode. Unlike, Intel and
AMD CPUs, VIA microcode is not available for download, and was
extracted from the vendor BIOS. It was not included in coreboot since
we never had explicit permission to do so. I have just received
confirmation from VIA that we can distribute the microcode.
Change-Id: I4c15b090cd2713cfe5dc6b50db777ff89dbc0f19
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/3357
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Move the include before static inline int spd_read_byte().
Change-Id: I4cac4b1f55368041b067422d95c09208e15d0f2d
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-on: http://review.coreboot.org/3368
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This commit fixes problems if we build raminit.c
for romstage.
Change-Id: Ic1380f3635ac28b939fa2a8ce614814012455c44
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-on: http://review.coreboot.org/3363
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
In order to get rid of the bad #include "northbridge/amd/lx/raminit.c"
line we need to do some prepartion steps. This commit is one of them.
Change-Id: I33173660bbda8894e7672e41e1b994d254d7ae8a
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-on: http://review.coreboot.org/3362
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Take a Parmer board with 4G memory as an example.
Use 'cat /proc/meminfo' to check memory, it reads 'MemTotal 3327540kB'.
Parmer uses 512M as video memory when it has 4G.
3327540+512*1024 = 3851828(kB), so some memory is lost.
When Parmer has 4G memory, TOM2 low is 0x1F000000, TOM2 high is
0x00000001. But in e820 table or coreboot table, the last item is
6: 0000000100000000 - 0000000118000000 = 1 RAM
This is not correct, it should be
6: 0000000100000000 - 000000011f000000 = 1 RAM
This patch changes the memory layout when TOM2 is set.
Change-Id: I4e2d163ae8fe1e65ddc384b520a5112ca067b1d1
Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com>
Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/3366
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Bash case statements are terminated with ';;'.
Unlike C, bash case statements will not continue to the next case. No 'break' is needed.
Change-Id: I62e7e91f3223ac4052728a1ca12a4681af0dc036
Signed-off-by: David Hubbard <david.c.hubbard+coreboot@gmail.com>
Reviewed-on: http://review.coreboot.org/3330
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This file was missing some definitions, so add them. Also turn the defines
into an enum. The reason for doing this is that functions can now
explicitly take an spd_memory_type as a parameter:
> int do_something_with_dram(enum spd_memory_type type, ...)
Which is a lot more explicit and readable than:
> int do_something_with_dram(u8 type, ...)
These are used in the VX900 branch.
Change-Id: Ic7871e82c2523a94eac8e07979a8e34e0b459b46
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/3266
Tested-by: build bot (Jenkins)
Use PRIx64 to print a u64 instead of "llx". Fixes the following error:
cbmem.c: In function 'parse_cbtable':
cbmem.c:135:2: error: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'u64' [-Werror=format=]
Change-Id: Ibc2bf8597cb86db5b2e71fba77ec837a08c5e3d4
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/3301
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Kyösti Mälkki