SD card need 20K PULLUP on D0-D3/CLOCK/COMMAND lines.
Without this SDCARD will throw data read/write errors.
BUG=chrome-os-partner:54676
TEST=Build and boot to OS.
Verify SD card is detected and data read/write works well.
Change-Id: I90da5b84dc2e488eb38f805322bd7b4dee394e5b
Signed-off-by: Freddy Paul <freddy.paul@intel.com>
Reviewed-on: https://review.coreboot.org/15345
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Add the audio controller device to ACPI and define the _DSM handler
to return the address of the NHLT table, if set in NVS.
Change-Id: I619dbfb562b94255e42a3e5d5a3926c28b14db3e
Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Reviewed-on: https://review.coreboot.org/15026
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Configure unused Pads as NC
and sort the pads according to the gpio community.
Move the pad configurations from mainboard to gpio.h
BUG=none
TEST=Boot to OS and check all functionalities.
Change-Id: I8e9eeebf5d75c71c521649c72612c06f3fa43701
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/15327
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The different entry points (0x100, 0x140, ...), which were defined in
the RISC-V Privileged Specification 1.7, aren't used anymore. Instead
the Spike bootrom jumps at the start of our image, and traps are handled
through mtvec.
Change-Id: I865adec5e7a752a25bac93a45654ac06e27d5a8e
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15283
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The previous change with that intent aligned the framebuffer's
bytes-per-line to 64 instead of 32:
commit 8957dd6b52
Author: Paul Kocialkowski <contact@paulk.fr>
Date: Sun May 1 18:38:04 2016 +0200
tegra124: Align the framebuffer's bytes-per-line to 32
Change-Id: I88bba2ff355a51d42cab6a869ec1e9c534160b9c
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/14816
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
This will allow kernel to trigger a APM SMI to enable\disable SCI
Change-Id: I1be79b7a3082c23fbaf204eff55360c46458e325
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15347
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Parse the devicetree and pass the unused device to fsp
for disabling the device function.
BRANCH=none
BUG=chrome-os-partner:54325
TEST=device off in devicetree should disable the device.
Change-Id: I784b72a43fda13aa17634bf680205ab2d36e8d09
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/15337
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Add support for vboot_platform_prepare_reboot which is called whenever
vboot requests reboot of the platform. SLP_TYPE needs to be set to S5 in
such conditions since the platform would no longer be in a resuming
state after reset.
Change-Id: I01392bfda90c9274cd52c1004555d250b1d539b7
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15340
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The name 'bpdt_size' is used for a function as well as ia local variable.
As ifwitool is compiled using HOSTCC, there can be an older gcc version
used for the compilation. With gcc version 4.4.7 I get the following
error: declaration of 'bpdt_size' shadows a global declaration
To fix it, rename the function to get_bpdt_size so that names are
unique now.
Change-Id: I47791c705ac4ab28307c52b86940a7a14a5cfef8
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15343
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
We want to be able to easily change SDRAM clock rate for debugging
purposes. This patch adds configurations for 4 different clock rates.
Same configs are used for all rk3399 boards at 200, 666 and 800 MHz.
Kevin board does not run reliably at 666 MHz, an option for it is
added to run at 300 MHz, this option is available to Kevin only.
There is not much room left in the coreboot romstage section, this is
why the config file for 928 MHz is being added with this patch but is
not included in the code, one of the lower frequency options will have
to be dropped for the higher frequency option to be added.
BRANCH=none
BUG=chrome-os-partner:54144
TEST=run "stressapptest -M 1024 -s 3600" and pass on both kevin and
gru. Verified that on Kevin the firmware reports starting up
SDRAM at 300 MHz and on Gru at 800 MHz.
Change-Id: Ie24c1813d5a0e9f0f9bfc781cade9e28fb6eb2f1
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: ef5e4551b79c3f0531f9af35491f2c593f8482f1
Original-Change-Id: I08bccd40147ad89d851b995a8aab4d2b6da8258a
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/353493
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-on: https://review.coreboot.org/15309
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
This is a purely cosmetic change replacing some of the more prominent
copy and paste sections of the code with compressed versions of the
same.
BRANCH=none
BUG=none
TEST=with the rest of the patches applied stressapptest still runs for
an hour on both Kevin and Gru.
Change-Id: I492e1898e312473d07d9e5eceb3e3e10b48ee35f
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: eb8043f96457d090dbbee57097bc1d685e7d32d2
Original-Change-Id: I362e0e261209ae4d4890ecb0e08bb1956c172ffd
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/353774
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-on: https://review.coreboot.org/15308
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Obtain the real-time clock value from the EC on start-up and show the
current time.
BUG=chrome-os-partner:52220
BRANCH=none
TEST=(partial) with future commits and EC clock set, boot on gru into
Linux shell and check the firmware log:
localhost ~ # grep Date: /sys/firmware/log
Date: 2016-06-20 (Monday) Time: 18:09:16
Change-Id: Id3ef791f546419c4881a891251cbb62d7596884b
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 348e9373b0e95a17f5c39ec28a480712e6e45caf
Original-Change-Id: Iff43b16a86d9fee483420ee2eff5ff3d276716a3
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/351781
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15303
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Call basic FSP reset handling in FspNotify stage. Handling of reset requests
for other stages need to be implemented as well.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=with FSP that returns reset codes, do cold boot, check
that reboot sequence occurs properly.
Change-Id: I55542aa37e60edb17ca24ac358b61df72679b83e
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15280
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Any FSP API call may request a reset. This is indicated in API function
return code. Add trivial reset handler code.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=none
Change-Id: Ieb5e2d52ffdaf3c3ed416603f6dbb4f9c25a1a7b
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15334
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Global reset enable bit is not cleared on reset. Therefore, clear
the bit early. Lock down 0xcf9 so that payload/OS can't issue
global reset.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=none
Change-Id: I3ddf6dd82429b725c818bcd96e163d2ca0acd308
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15199
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Apollolake defines Global Reset where Host, TXE and PMC are reset.
During boot we may need to trigger a global reset as part of platform
initialization (or for error handling). Add functions to trigger
global reset, enable/disable it and lock global reset bit.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=none
Change-Id: I84296cd1560a0740f33ef6b488f15f99d397998d
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15198
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Looks like we need to do real cold reset in some FSP flows, so
reverting this.
This reverts commit 6f762171de.
Change-Id: Ie948d264c4e2572dab26fdb9462905247a168177
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15331
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Some platforms have an RTC provided by the Chrome OS EC. Allow the EC to
implement rtc_get() so that this can be plumbed in.
BUG=chrome-os-partner:52220
BRANCH=none
TEST=(partial) with future commits, boot on gru and see output:
Date: 1970-01-17 (Saturday) Time: 1:42:44
Then reboot ~10 seconds later and see output:
Date: 1970-01-17 (Saturday) Time: 1:42:53
Change-Id: I3b38f23b259837cdd4bd99167961b7bd245683b3
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 4a4a26da37323c9ac33030c8f1510efae5ac2505
Original-Change-Id: Icaa381d32517dfed8d3b7927495b67a027d5ceea
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/351780
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15302
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add functions to convert between seconds and a struct rtc_time. Also
add a function that can display the time on the console.
BUG=chrome-os-partner:52220
BRANCH=none
TEST=(partial) with future commits and after setting RTC on the EC:
boot on gru into linux shell, check firmware log:
localhost ~ # grep Date: /sys/firmware/log
Date: 2016-06-20 (Monday) Time: 18:01:44
Then reboot ~10 seconds and check again:
localhost ~ # grep Date: /sys/firmware/log
Date: 2016-06-20 (Monday) Time: 18:01:54
Change-Id: Id148ccb7a18a05865b903307358666ff6c7b4a3d
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 3b02dbcd7d9023ce0acabebcf904e70007428d27
Original-Change-Id: I344c385e2e4cb995d3a374025c205f01c38b660d
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/351782
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15301
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Declare the mainboard attached devices in the devicetree and enable
the provided device drivers by default to generate the ACPI objects
for these devices. Then remove the static ACPI objects from the DSDT
in mainboard.asl.
This was tesed on a Chell mainboard since I lack a kunitmisu device.
I used different GPIOs across boots to verify that the different
audio codec devices would be "detected" and generated in the SSDT.
Change-Id: I9b3b2247a84aeb7c07780958377d5bea14417ce6
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15317
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Declare the mainboard attached devices in the devicetree and enable
the provided device drivers by default to generate the ACPI objects
for these devices. Then remove the static ACPI objects from the DSDT
in mainboard.asl.
This was tested on a Chell mainboard since I lack a lars device.
Change-Id: Ifba6fc6589ddd54f4c85e8858f17997fbb4b6176
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15316
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Declare the mainboard attached devices in the devicetree and enable
the provided device drivers by default to generate the ACPI objects
for these devices. Then remove the static ACPI objects from the DSDT
in mainboard.asl.
This was verified on a glados board by verifying the SSDT contents
against what used to be in the DSDT.
Change-Id: I710cbb8462d0fe695297102a64bec8e4212acc65
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15315
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Declare the mainboard attached devices in the devicetree and enable
the provided device drivers by default to generate the ACPI objects
for these devices. Then remove the static ACPI objects from the DSDT
in mainboard.asl.
This was verified by comparing the generated ACPI code in the SSDT
to what was in mainboard.asl and ensuring the contents are
functionally equivalent.
Change-Id: I4725bbe2d47178568e3024fe3bb48cc80ff861c3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15314
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Rewrite inline assembly for ARMv7+ to correctly annotate inputs and
outputs. On ARM GCC 6.1.1, this causes assembly output to change from
the incorrect
@ r0 is allocated to hold dst and x0
@ r1 is allocated to hold src and x1
ldr r0, [r1] @ clobbers dst!
ldr r1, [r1, #4]
str r0, [r0]
str r1, [r0, #4]
to the correct
@ r0 is allocated to hold dst
@ r1 is allocated to hold src and x1
@ r3 is allocated to hold x0
ldr r3, [r1]
ldr r1, [r1, #4]
str r3, [r0]
str r1, [r0, #4]
Also modify checkpatch.pl to ignore spaces before opening brackets when
used in inline assembly.
Change-Id: I255995f5e0a7b1a95375258755a93972c51d79b8
Signed-off-by: Benjamin Barenblat <bbaren@google.com>
Reviewed-on: https://review.coreboot.org/15216
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Correct the definitions for 16b and 32b SO-DIMM modules.
Regarding JEDEC Standard No. 21-C
Annex K: Serial Presence Detect for DDR3 SDRAM Modules (2014),
the hex values used for 16b-SO-DIMM is 0x0c
and for 32b-SO-DIMM module type is 0x0d
Change-Id: I9210ac3409a4aaf55a0f6411d5960cfdca05068d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15262
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Broken with commit:
2585209 mb/samsung/lumpy/romstage: read SPD data of removable DIMM
The blob can pick SPDs from the addresses defined in pei_data
and we do only define read_spd() with USE_NATIVE_RAMINIT.
Change-Id: Ibd6d7a4a53fa808b476d3060872cb10d3dfce534
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15329
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Broken with commit:
5c10abe nb/intel/sandybridge: increase MMCONF_BASE_ADDRESS
Available sandybridge/systemagent-r6.bin has MMCONF hard-coded
at some places and samsung/lumpy fails at boot here:
CBFS: Locating 'mrc.bin'
CBFS: Found @ offset 9fec0 size 2fc94
System Agent: Starting up...
System Agent: Initializing
These are the last lines as captured over USB debug.
Change-Id: I441847f0e71a5e1be9c8ef6a04a81eb7bdd8a6d9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15328
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
1. Mark 256KiB at end of BIOS region as unusable BIOS region is
memory-mapped just below 4GiB, however last 256KiB is unusable. Mark it
accordingly in fmd file.
2. Use up holes in RW region for RW_A and RW_B.
3. Fill up holes in RO with UNUSED regions.
BUG=chrome-os-partner:54672
Change-Id: I5facc566bb70d950522e12228b0631ddf00ac63d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15313
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Freddy Paul