Go to file
Marshall Dawson 251d305e73 soc/amd/stoneyridge: Move GPIO support to common
The banked GPIO functionality in the AcpiMmio block has been consistent
since the Mullins product.  Move the basic support into a common
directory.

Each product's pin availability, MUXes, and other details must remain
specific to the product.

The relocated source also drops the weak configure_gevent_smi() that
reports SMI is not available.  The stoneyridge port relies on SMI
to do its initialization, similar to modern soc/intel devices.  This
is the plan for future soc/amd ports, so make a missing function a
build error instead of a runtime warning.

BUG=b:131682806

Change-Id: I9cda00210a74de2bd1308ad43e2b867d24a67845
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-06 17:57:40 +00:00
3rdparty 3rdparty: Uprev vboot submodule to upstream master 2019-05-13 09:32:04 +00:00
Documentation mb/hp: Add Z220 SFF workstation 2019-06-06 12:13:19 +00:00
configs mb/lenovo/*: Add support for VBOOT on 8MiB devices 2019-05-08 10:31:23 +00:00
payloads Revert "libpayload: Reset PS/2 keyboard" 2019-06-06 15:22:43 +00:00
src soc/amd/stoneyridge: Move GPIO support to common 2019-06-06 17:57:40 +00:00
util util/lint: Make usage of IS_ENABLED() an error 2019-06-04 13:16:16 +00:00
.checkpatch.conf .checkpatch.conf: Ignore a few more warnings 2018-08-13 12:23:24 +00:00
.clang-format Revert "lint/clang-format: set to 96 chars per line" 2019-03-15 23:05:06 +00:00
.gitignore util/bucts: Add tool to manipulate BUC.TS bit on Intel targets 2018-11-19 08:19:16 +00:00
.gitmodules 3rdparty/opensbi: Add submodule 2019-04-24 08:46:25 +00:00
.gitreview
COPYING
MAINTAINERS MAINTAINERS: Add maintainer to Facebook FBG1701 2019-06-05 13:04:10 +00:00
Makefile Hook up Kconfig Ada spec file 2019-02-06 16:20:35 +00:00
Makefile.inc Makefile.inc: Extend version string for timeless builds 2019-05-29 20:09:24 +00:00
README.md README: Convert to Markdown 2018-09-16 13:01:58 +00:00
gnat.adc
toolchain.inc arch/power8: Rename to ppc64 2018-11-30 20:02:17 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.