Go to file
Jianjun Wang 270b0b60ac soc/mediatek: Add PCIe support
Add PCIe support for MediaTek platform.

Reference:
  - MT8195 Register Map V0.3-2, Chapter 3.18 PCIe controller (Page 1250)
  - linux/drivers/pci/controller/pcie-mediatek-gen3.c

This code is based on MT8195 platform, but it should be common in each
platform with the same PCIe IP in the future.

TEST=Build pass and boot up to kernel successfully via SSD on Dojo
board, here is the SSD information in boot log:
 == NVME IDENTIFY CONTROLLER DATA ==
    PCI VID   : 0x15b7
    PCI SSVID : 0x15b7
    SN        : 21517J440114
    MN        : WDC PC SN530 SDBPTPZ-256G-1006
    RAB       : 0x4
    AERL      : 0x7
    SQES      : 0x66
    CQES      : 0x44
    NN        : 0x1
Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006

BUG=b:178565024

Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Ib9b6adaafa20aeee136372ec9564273f86776da0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-09 00:48:01 +00:00
3rdparty Update fsp submodule to upstream master 2022-03-01 01:53:17 +00:00
Documentation mb/starlabs/labtop: Add LabTop Mk IV 2022-03-08 16:05:46 +00:00
LICENSES treewide: Remove trailing whitespace 2021-02-17 17:30:05 +00:00
configs src/mainboard/emulation/qemu-power9/*: add QEMU POWER9 mainboard 2022-02-11 20:14:55 +00:00
payloads libpayload: cbmem_console: Drop loglevel markers from snapshot 2022-03-04 16:04:10 +00:00
spd util/spd_tools: Encode SDRAM min cycle time (TCKMinPs) 2022-03-08 23:46:50 +00:00
src soc/mediatek: Add PCIe support 2022-03-09 00:48:01 +00:00
tests timestamps: Rename timestamps to make names more consistent 2022-03-08 16:06:33 +00:00
util util/spd_tools: Encode SDRAM min cycle time (TCKMinPs) 2022-03-08 23:46:50 +00:00
.checkpatch.conf lint: checkpatch: Only exclude specific src/vendorcode/ subdirectories 2021-04-06 16:04:41 +00:00
.clang-format
.editorconfig Add .editorconfig file 2019-09-10 12:52:18 +00:00
.gitignore .gitignore: Ignore .test/.dependencies globally 2020-10-31 18:21:36 +00:00
.gitmodules .gitmodules: Update intel-microcode submodule to track branch=main 2021-06-09 17:20:50 +00:00
.gitreview
.mailmap .mailmap: Add a .mailmap file for git 2022-03-08 18:53:47 +00:00
AUTHORS
COPYING
MAINTAINERS MAINTAINERS: Update INTEL DENVERTON-NS SOC & HARCUVAR CRB Maintainers 2022-03-08 15:04:45 +00:00
Makefile Makefile: Add .SECONDARY 2022-02-28 22:00:42 +00:00
Makefile.inc Makefile: Add a build target for .map 2022-02-28 22:00:55 +00:00
README.md
gnat.adc treewide: Remove "this file is part of" lines 2020-05-11 17:11:40 +00:00
toolchain.inc build system: immediately report what users are supposed to look into 2021-10-18 16:39:25 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.