Go to file
Raul E Rangel 45ba318b2a mb/google/guybrush: Enable CONSOLE_CBMEM_DUMP_TO_UART
This will make debugging boot failures with a non-serial firmware
easier. If we encounter an error that requires a reboot, this will dump
the entire CBMEM contents onto the UART. This is especially helpful
during S0i3 resume because the PSP verstage console logs are not
exposed anywhere.

BUG=b:215599230
TEST=Cause verstage error in S0i3 with non-serial firmware and see that
the verstage logs were dumped to the UART before rebooting.

    Entering PSP verstage S0i3 resume
    tpm_setup failed rv:1
    VB2:vb2api_fail() Need recovery, reason: 0x3f / 0xcc
    Saving nvdata

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I908037527206cc7bed2302fab60b2912d6dabc73
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-02-08 16:35:08 +00:00
3rdparty 3rdparty/amd_blobs: advance submodule pointer 2022-02-01 20:28:53 +00:00
Documentation Documentation/releases: Add 4.17 release notes template 2022-02-03 17:17:25 +00:00
LICENSES
configs configs/i440fx: Build-test PARALLEL_MP 2022-02-07 13:48:05 +00:00
payloads libpayload: Refer to vboot source consistently 2022-01-28 14:47:38 +00:00
spd spd: Add new LP5 part Samsung K3LKBKB0BM-MGCP 2022-02-03 14:47:49 +00:00
src mb/google/guybrush: Enable CONSOLE_CBMEM_DUMP_TO_UART 2022-02-08 16:35:08 +00:00
tests tests: Fix tests code and comments style 2022-01-14 14:29:29 +00:00
util console: Add loglevel marker codes to stored consoles 2022-02-07 23:28:37 +00:00
.checkpatch.conf lint: checkpatch: Only exclude specific src/vendorcode/ subdirectories 2021-04-06 16:04:41 +00:00
.clang-format
.editorconfig
.gitignore
.gitmodules .gitmodules: Update intel-microcode submodule to track branch=main 2021-06-09 17:20:50 +00:00
.gitreview
AUTHORS
COPYING
MAINTAINERS MAINTAINERS: add maintainers for mb/amd/chausie 2022-01-26 17:09:15 +00:00
Makefile Makefile: Defer normalizing configuration for reproducible builds 2022-01-14 00:30:04 +00:00
Makefile.inc IASL: Ignore IASL's "Missing dependency" warning 2022-01-28 16:34:23 +00:00
README.md README.md: Remove link to deprecated wiki 2019-11-16 20:39:55 +00:00
gnat.adc
toolchain.inc build system: immediately report what users are supposed to look into 2021-10-18 16:39:25 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.