coreboot-kgpe-d16/src/soc/intel/jasperlake/systemagent.c
Angel Pons 9849488da1 soc/intel: Replace SA_PCIEX_LENGTH Kconfig options
Use the existing `MMCONF_BUS_NUMBER` and `MMCONF_LENGTH` symbols.

Change-Id: I88dcc0d5845198f668c6604c45fd869617168231
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-30 23:14:08 +00:00

62 lines
1.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
#include <device/device.h>
#include <delay.h>
#include <device/pci.h>
#include <device/pci_ops.h>
#include <intelblocks/systemagent.h>
#include <intelblocks/power_limit.h>
#include <soc/iomap.h>
#include <soc/soc_chip.h>
#include <soc/systemagent.h>
/*
* SoC implementation
*
* Add all known fixed memory ranges for Host Controller/Memory
* controller.
*/
void soc_add_fixed_mmio_resources(struct device *dev, int *index)
{
static const struct sa_mmio_descriptor soc_fixed_resources[] = {
{ PCIEXBAR, CONFIG_MMCONF_BASE_ADDRESS, CONFIG_MMCONF_LENGTH,
"PCIEXBAR" },
{ MCHBAR, MCH_BASE_ADDRESS, MCH_BASE_SIZE, "MCHBAR" },
{ DMIBAR, DMI_BASE_ADDRESS, DMI_BASE_SIZE, "DMIBAR" },
{ EPBAR, EP_BASE_ADDRESS, EP_BASE_SIZE, "EPBAR" },
{ REGBAR, REG_BASE_ADDRESS, REG_BASE_SIZE, "REGBAR" },
{ EDRAMBAR, EDRAM_BASE_ADDRESS, EDRAM_BASE_SIZE, "EDRAMBAR" },
};
sa_add_fixed_mmio_resources(dev, index, soc_fixed_resources,
ARRAY_SIZE(soc_fixed_resources));
/* Add Vt-d resources if VT-d is enabled */
if ((pci_read_config32(dev, CAPID0_A) & VTD_DISABLE))
return;
sa_add_fixed_mmio_resources(dev, index, soc_vtd_resources,
ARRAY_SIZE(soc_vtd_resources));
}
/*
* SoC implementation
*
* Perform System Agent Initialization during Ramstage phase.
*/
void soc_systemagent_init(struct device *dev)
{
struct soc_power_limits_config *soc_config;
config_t *config;
/* Enable Power Aware Interrupt Routing */
enable_power_aware_intr();
/* Enable BIOS Reset CPL */
enable_bios_reset_cpl();
mdelay(1);
config = config_of_soc();
soc_config = &config->power_limits_config;
set_power_limits(MOBILE_SKU_PL1_TIME_SEC, soc_config);
}