45 lines
2.7 KiB
Markdown
45 lines
2.7 KiB
Markdown
# me_cleaner
|
|
|
|
Intel ME is a coprocessor integrated in all post-2006 Intel boards, for which
|
|
this [Libreboot page](https://libreboot.org/faq.html#intelme) has an excellent
|
|
description. The main component of Intel ME is Intel AMT, and I suggest you to
|
|
read [this Wikipedia page](https://en.wikipedia.org/wiki/Intel_Active_Management_Technology)
|
|
for more information about it. In short, Intel ME is an irremovable environment
|
|
with an obscure signed proprietary firmware, with full network and memory
|
|
access, which poses a serious security threat.
|
|
Even when disabled from the BIOS settings, Intel ME is active: the only way to
|
|
be sure it is disabled is to remove its firmware from the flash chip.
|
|
|
|
Before Nehalem (ME version 6, 2008/2009) the ME firmware could be removed
|
|
completely from the flash chip by setting a couple of bits inside the flash
|
|
descriptor, without the need to reverse-engineer the ME firmware.
|
|
|
|
Starting from Nehalem the Intel ME firmware can't be removed anymore: without a
|
|
valid firmware the PC shuts off forcefully after 30 minutes. This project is an
|
|
attempt to remove as much code as possible from such firmware without falling
|
|
into the 30 minutes recovery mode.
|
|
|
|
me_cleaner currently works on most architectures, see [me_cleaner status](https://github.com/corna/me_cleaner/wiki/me_cleaner-status) (or [its discussion](https://github.com/corna/me_cleaner/issues/3))
|
|
for more info about them. me_cleaner works also on the TXE and SPS firmware.
|
|
|
|
If you want to understand how me_cleaner works, you can read the ["How does it work?" page](https://github.com/corna/me_cleaner/wiki/How-does-it-work%3F).
|
|
|
|
If you want to apply me_cleaner on your platform I suggest you to read the
|
|
["How does it work?" page](https://github.com/corna/me_cleaner/wiki/How-does-it-work%3F)
|
|
and then follow the guide ["How to apply me_cleaner"](https://github.com/corna/me_cleaner/wiki/How-to-apply-me_cleaner).
|
|
|
|
For pre-Skylake firmware (ME version < 11) this tool removes almost everything,
|
|
leaving only the two fundamental modules needed for the correct boot, ROMP and
|
|
BUP. The code size is reduced from 1.5 MB (non-AMT firmware) or 5 MB (AMT
|
|
firmware) to ~90 kB of compressed code.
|
|
|
|
Starting from Skylake (ME version >= 11) the ME subsystem and the firmware
|
|
structure have changed, requiring substantial changes in me_cleaner.
|
|
The fundamental modules required for the correct boot are now four (rbe, kernel,
|
|
syslib and bup) and the minimum code size is ~300 kB of compressed code (from
|
|
the 2 MB of the non-AMT firmware and the 7 MB of the AMT one).
|
|
|
|
This project is based on the work of the community; in particular I thank Igor
|
|
Skochinsky, for the core information about Intel ME and its firmware structure,
|
|
and Federico Amedeo Izzo, for its help during the study of Intel ME.
|