Go to file
Mike Loptien 573a1d6fa8 Persimmon/Fam14/SB800 DSDT: Split into common areas
Split the Persimmon DSDT into common code areas.
For example, split the Southbridge specific code into
the Southbridge directory and CPU specific code into
the CPU directory.  Also adding the superio.asl file
to the Persimmon DSDT tree. This file is empty for
the moment but will be necessary in the future.  I have
also emptied the thermal.asl file in the mainboard
directory because it does not seem to perform as
intended (fan control does not change when it is
brought back into the code base) and it has been
inside a '#if 0' statement for a long time.  Removing
it until it is decided that it is actually necessary.

This change was verified in three different ways:
	1. Visual comparison of the compiled DSDT pulled from the
	Persimmon after booting into Linux using the ACPI tools
	acpidump, acpixtract, and iasl.  The comparison was done
	between the DSDT before and after doing the split work.

	This test is somewhat difficult considering the expanse
	of the changes.  Blocks of code have been moved, and
	others changed.

	2. Linux logs were dumped before and after the DSDT split.
	Logs dumped and compared include dmesg and lspci -tv.
	Neither log changed significantly between the two compare
	points.

	3. The test suite FWTS was run on the Coreboot build both
	before and after doing the DSDT split with the command
	'sudo fwts -b -P -u'.  The flag -b specifies all batch jobs,
	-P specifies all power tests, and -u specifies utilities.
	Interactive jobs were not run as most of them consist of
	laptop checks.  Again, there were no significant changes
	between the two endpoints.

These tests lead me to believe that there was no change in
the functionality of the ACPI tables apart from what is
known and expected.

This patch is the first of a series of patches to split the DSDT.
The ASRock patch was merged before this one and breaks the ASROCK
E350M1 build (patch 8d80a3fb: http://review.coreboot.org/#/c/3050/).
Please be aware of this dependency when pulling these patches.
Other patches that depend on this patch are
'AMD Fam14: Split out the AMD Fam14 DSDT'
(http://review.coreboot.org/#/c/3051/)
and 'Fam14 DSDT: Also return for unrecognized UUID in _OSC'
(http://review.coreboot.org/#/c/3052/)

Change-Id: I53ff59909cceb30a08e8eab3d59b30b97c802726
Signed-off-by: Mike Loptien <mike.loptien@se-eng.com>
Reviewed-on: http://review.coreboot.org/3048
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-04-11 21:48:27 +02:00
3rdparty@ba8caa30bd Update 3rdparty mark to latest repository 2013-03-15 19:09:08 +01:00
documentation sconfig: rename lapic_cluster -> cpu_cluster 2013-02-14 07:07:20 +01:00
payloads libpayload: storage.c: Fix typo in st*orage in comment 2013-04-11 18:09:20 +02:00
src Persimmon/Fam14/SB800 DSDT: Split into common areas 2013-04-11 21:48:27 +02:00
util util/cbmem: Don't output trailing garbage for cbmemc 2013-04-09 23:52:36 +02:00
.gitignore add a few entries to .gitignore 2013-01-10 22:51:20 +01:00
.gitmodules gitmodules: Ignore 3rdparty in "diff family" 2013-03-16 04:07:14 +01:00
.gitreview add .gitreview 2012-11-01 23:13:39 +01:00
COPYING update license template. 2006-08-12 22:03:36 +00:00
Makefile build system: Retire REQUIRES_BLOB 2013-02-19 11:00:41 +01:00
Makefile.inc rmodule: add rmodules class and new type 2013-03-18 20:46:40 +01:00
README Update README with newer version of the text from the web page 2011-06-15 10:16:33 +02:00

README

-------------------------------------------------------------------------------
coreboot README
-------------------------------------------------------------------------------

coreboot is a Free Software project aimed at replacing the proprietary BIOS
(firmware) found in most computers.  coreboot performs a little bit of
hardware initialization and then executes additional boot logic, called a
payload.

With the separation of hardware initialization and later boot logic,
coreboot can scale from specialized applications that run directly
firmware, run operating systems in flash, load custom
bootloaders, or implement firmware standards, like PC BIOS services or
UEFI. This allows for systems to only include the features necessary
in the target application, reducing the amount of code and flash space
required.

coreboot was formerly known as LinuxBIOS.


Payloads
--------

After the basic initialization of the hardware has been performed, any
desired "payload" can be started by coreboot.

See http://www.coreboot.org/Payloads for a list of supported payloads.


Supported Hardware
------------------

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

 * http://www.coreboot.org/Supported_Motherboards
 * http://www.coreboot.org/Supported_Chipsets_and_Devices


Build Requirements
------------------

 * gcc / g++
 * make

Optional:

 * doxygen (for generating/viewing documentation)
 * iasl (for targets with ACPI support)
 * gdb (for better debugging facilities on some targets)
 * ncurses (for 'make menuconfig')
 * flex and bison (for regenerating parsers)


Building coreboot
-----------------

Please consult http://www.coreboot.org/Build_HOWTO for details.


Testing coreboot Without Modifying Your Hardware
------------------------------------------------

If you want to test coreboot without any risks before you really decide
to use it on your hardware, you can use the QEMU system emulator to run
coreboot virtually in QEMU.

Please see http://www.coreboot.org/QEMU for details.


Website and Mailing List
------------------------

Further details on the project, a FAQ, many HOWTOs, news, development
guidelines and more can be found on the coreboot website:

  http://www.coreboot.org

You can contact us directly on the coreboot mailing list:

  http://www.coreboot.org/Mailinglist


Copyright and License
---------------------

The copyright on coreboot is owned by quite a large number of individual
developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL).
Some files are licensed under the "GPL (version 2, or any later version)",
and some files are licensed under the "GPL, version 2". For some parts, which
were derived from other projects, other (GPL-compatible) licenses may apply.
Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.