coreboot-kgpe-d16/Documentation/mainboard/lenovo/t4xx_series.md
Bill XIE 9cb2da45d8 mb/lenovo/x220: Add x1 as a variant
ThinkPad X1 ( https://www.thinkwiki.org/wiki/Category:X1 ) is nearly a
clone of X220, with additional USB3 controller on pci-e (as i7 variant
of x220), and a powered ESATA port wired to ata4 (Linux' annotation).

Documentation added.

Tested:
- CPU i5-2520M
- Slotted DIMM 8GiB
- Camera
- Mini pci-e on wlan slot
- Msata on wwan slot
- On board SDHCI connected to pci-e
- USB3 controller connected to pci-e
- NVRAM options for North and South bridges
- S3
- TPM1 on LPC
- Linux 4.9.110-3 within Debian GNU/Linux stable, loaded from
  SeaBIOS, or Linux payload (Heads)

Not tested:
- Fingerprint reader on USB2
- Onboard USB2 interfaces (wlan slot, wwan slot)

Change-Id: Ibbc45f22c63b77ac95c188db825d0d7e2b03d2d1
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-17 17:09:53 +00:00

1.1 KiB

Lenovo T4xx series disassembly instructions

A skilled engineer takes around 40 minutes to disassemble, flash and reassemble the whole device.

Read their Hardware Maintenance Manual for detailed steps.

Steps to access the flash IC

  • Unplug the main battery
  • Remove the harddisk, CDROM, ExpressCard, SIM-card, SDcard, SmartCard, ...
  • Open the bottom flap and remove the keyboard screw
  • Remove the keyboard
  • Remove the screen
  • Remove the top enclosure
  • Remove the CMOS battery
  • Remove the speakers
  • Remove WWAN and WIFI card
  • Remove the CPU fan
  • Unplug the power cable
  • Remove the bottom enclosure
  • Flip the mainboard and remove the main frame

Docking stations

The following docking stations are supported by coreboot:

  • Type 2505
    • VGA, Ethernet, Modem, PS2, 4 USB Ports
    • Dock ID on pc87382 reads as: 2
  • Type 2504
    • Serial, LPT, LEDs, Audio, DVI, VGA, Ethernet, Modem, PS2, 4 USB Ports
    • Dock ID on pc87382 reads as: 1
    • PNP IO address of SuperIO pc87384: 0x2e

There's no hotplug support for LPT and Serial on Type 2504.

The Dock ID reads as 7 if no dock is connected.