Go to file
Duncan Laurie 5e949faec1 google/eve: Enable PD MCU device
In order for PD charge events to properly notify the OS when a charger is
attached we need to enable the PD MCU device and event source from the EC.

Without this change the charging still happens, but the OS does not notice
and update the charge state icon in the Chrome OS UI.

BUG=chrome-os-partner:62206
BRANCH=none
TEST=plug in a charger to either port and see charge status updated to
indicate charging in the power_supply_info tool and the Chrome OS UI.

Change-Id: Ia6f63ac719b739326d313f657a68005c32f45b8d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18209
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-24 19:25:50 +01:00
3rdparty 3rdparty: update arm-trusted-firmware submodule 2017-01-12 18:38:26 +01:00
Documentation Documentation: Add Kconfig document 2016-11-13 21:41:44 +01:00
configs configs/builder: Remove pre-defined VGA bios file 2017-01-20 17:37:19 +01:00
payloads libpayload: drivers/keyboard: report power button events 2017-01-24 09:33:48 +01:00
src google/eve: Enable PD MCU device 2017-01-24 19:25:50 +01:00
util cbfs-compression-tool: catch compression failures 2017-01-24 09:35:49 +01:00
.checkpatch.conf Update .checkpatch.conf 2016-09-02 18:22:04 +02:00
.clang-format
.gitignore .gitignore: Don’t track Tint directory 2017-01-22 21:15:58 +01:00
.gitmodules Set up 3rdparty/libgfxinit 2016-10-29 01:35:03 +02:00
.gitreview
COPYING
MAINTAINERS MAINTAINERS: Add lowrisc files to RISC-V 2016-11-12 19:30:26 +01:00
Makefile Makefile: Allow inclusion of source files from 3rdparty/ 2016-10-29 01:34:06 +02:00
Makefile.inc cbfs-compression-tool: add to "make tools" target 2017-01-24 18:19:28 +01:00
README Remove extra newlines from the end of all coreboot files. 2016-07-31 18:19:33 +02:00
gnat.adc gnat.adc: Do not generate assertion code for Refined_Post 2016-10-29 01:33:31 +02:00
toolchain.inc Add minimal GNAT run time system (RTS) 2016-09-19 11:14:49 +02:00

README

-------------------------------------------------------------------------------
coreboot README
-------------------------------------------------------------------------------

coreboot is a Free Software project aimed at replacing the proprietary BIOS
(firmware) found in most computers.  coreboot performs a little bit of
hardware initialization and then executes additional boot logic, called a
payload.

With the separation of hardware initialization and later boot logic,
coreboot can scale from specialized applications that run directly
firmware, run operating systems in flash, load custom
bootloaders, or implement firmware standards, like PC BIOS services or
UEFI. This allows for systems to only include the features necessary
in the target application, reducing the amount of code and flash space
required.

coreboot was formerly known as LinuxBIOS.


Payloads
--------

After the basic initialization of the hardware has been performed, any
desired "payload" can be started by coreboot.

See http://www.coreboot.org/Payloads for a list of supported payloads.


Supported Hardware
------------------

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

 * http://www.coreboot.org/Supported_Motherboards
 * http://www.coreboot.org/Supported_Chipsets_and_Devices


Build Requirements
------------------

 * make
 * gcc / g++
   Because Linux distribution compilers tend to use lots of patches. coreboot
   does lots of "unusual" things in its build system, some of which break due
   to those patches, sometimes by gcc aborting, sometimes - and that's worse -
   by generating broken object code.
   Two options: use our toolchain (eg. make crosstools-i386) or enable the
   ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this
   case).
 * iasl (for targets with ACPI support)

Optional:

 * doxygen (for generating/viewing documentation)
 * gdb (for better debugging facilities on some targets)
 * ncurses (for 'make menuconfig' and 'make nconfig')
 * flex and bison (for regenerating parsers)


Building coreboot
-----------------

Please consult http://www.coreboot.org/Build_HOWTO for details.


Testing coreboot Without Modifying Your Hardware
------------------------------------------------

If you want to test coreboot without any risks before you really decide
to use it on your hardware, you can use the QEMU system emulator to run
coreboot virtually in QEMU.

Please see http://www.coreboot.org/QEMU for details.


Website and Mailing List
------------------------

Further details on the project, a FAQ, many HOWTOs, news, development
guidelines and more can be found on the coreboot website:

  http://www.coreboot.org

You can contact us directly on the coreboot mailing list:

  http://www.coreboot.org/Mailinglist


Copyright and License
---------------------

The copyright on coreboot is owned by quite a large number of individual
developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL).
Some files are licensed under the "GPL (version 2, or any later version)",
and some files are licensed under the "GPL, version 2". For some parts, which
were derived from other projects, other (GPL-compatible) licenses may apply.
Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.