coreboot-kgpe-d16/util/superiotool
Uwe Hermann a57a0ac53e Add detection support for the SMSC FDC37M602.
The ID was found on a Biostar M6TLD board (not mentioned in the
FDC37M60x datasheet, though).

Thanks Maciej Pijanka <maciej.pijanka@gmail.com> for the report.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4668 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-24 12:17:07 +00:00
..
COPYING
Makefile * Add OSX/Darwin support 2009-09-01 09:57:55 +00:00
README - List SMSC LPC47N227 runtime register block as supported. 2009-03-25 17:38:40 +00:00
ali.c The Winbond Super I/O chips have another indirection of registers. The 2008-12-01 14:18:57 +00:00
fintek.c Add dump information for F71862FG and F71863FG. 2009-06-26 15:16:21 +00:00
ite.c Superiotool: Add IT8703F support. 2009-07-12 14:24:06 +00:00
nsc.c This adds register definitions for all logical devices on the SMSC 2009-06-26 15:25:04 +00:00
smsc.c Add detection support for the SMSC FDC37M602. 2009-09-24 12:17:07 +00:00
superiotool.8
superiotool.c - List SMSC LPC47N227 runtime register block as supported. 2009-03-25 17:38:40 +00:00
superiotool.h * Add OSX/Darwin support 2009-09-01 09:57:55 +00:00
winbond.c This adds register definitions for all logical devices on the SMSC 2009-06-26 15:25:04 +00:00

README

-------------------------------------------------------------------------------
Superiotool README
-------------------------------------------------------------------------------

Superiotool is a user-space utility which can

 - detect which Super I/O chip is soldered onto your mainboard,

 - at which configuration port it's located (usually 0x2e or 0x4e), and

 - dump all register contents of the Super I/O chip, together with the
   default values as per datasheet (to make comparing the values easy).

It is mainly used for coreboot development purposes (see coreboot.org
for details on coreboot), but it may also be useful for other things.


Installation
------------

 $ svn co svn://coreboot.org/repos/trunk/util/superiotool

 $ cd superiotool

 $ make

 $ sudo make install


Usage
-----

Please read the superiotool(8) manpage or type 'superiotool --help'.

Per default (no options) superiotool will just probe for a Super I/O
and print its vendor, name, ID, revision, and config port.

Typical usage of superiotool:

 - Probe/detect the Super I/O in your mainboard:

   $ superiotool

 - Register dump as table of hex-values of the Super I/O (if detected):

   $ superiotool -d


Supported Super I/O Chips
-------------------------

Please see http://coreboot.org/Superiotool#Supported_devices, or type

 $ superiotool -l

There's also a collection of sample register dumps from various Super I/O
chips on that web page. Please send further register dumps (either from a
proprietary BIOS and/or from coreboot) to the coreboot mailing list
(http://coreboot.org/Mailinglist).


Website and Mailing List
------------------------

The main website is http://coreboot.org/Superiotool.

For additional information, patches, and discussions, please join the
coreboot mailing list at http://coreboot.org/Mailinglist, where most
superiotool developers are subscribed.


Copyright and License
---------------------

Superiotool is copyrighted by a number of individual developers. Please
refer to the respective source code files for details.

It is licensed under the terms of the GNU General Public License (GPL),
either version 2 of the license, or (at your option) any later version.


Contributors
------------

Andriy Gapon <avg@icyb.net.ua>
Bingxun Shi <bingxunshi@gmail.com>
Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
David Hendricks <david.hendricks@gmail.com>
Frieder Ferlemann <Frieder.Ferlemann@web.de>
Idwer Vollering <idwer_v@hotmail.com>
Josh Profitt <zorn169@gmail.com>
Michał Mirosław <mirq-linux@rere.qmqm.pl>
Rasmus Wiman <rasmus@wiman.org>
Robinson P. Tryon <bishop.robinson@gmail.com>
Ronald Hoogenboom <hoogenboom30@zonnet.nl>
Ronald Minnich <rminnich@gmail.com>
Stefan Reinauer <stepan@coresystems.de>
Ulf Jordan <jordan@chalmers.se>
Urja Rannikko <urjaman@gmail.com>
Uwe Hermann <uwe@hermann-uwe.de>
Ward Vandewege <ward@gnu.org>