Arthur Heymans 62902ca45d sb/ich7: Use common/gpio.h to set up GPIOs ... This is more consistent with newer Intel targets. This a static struct so it is initialized to 0 by default. To make it more readable: * only setting to GPIO mode is made explicit; * only pins in GPIO mode are either set to input or output since this is ignored in native mode; * only output pins are set high or low, since this is read-only on input; * blink is only operational on output pins, non-blink is not set explicitly; * invert is only operational on input pins, non-invert is not set explicitly. Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17639 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>		2017-01-06 18:14:00 +01:00
..
acpi	mainboard/intel: Update license headers	2016-04-13 17:31:12 +02:00
acpi_tables.c
board_info.txt
cstates.c
devicetree.cb	mb/intel/d510mo: Explicitly select NIC on PCI in devicetree	2016-02-09 18:22:33 +01:00
dsdt.asl	mb/intel/d510mo: Add CPU, SMI-trap and PIC to DSDT	2016-01-28 17:56:14 +01:00
gpio.c	sb/ich7: Use common/gpio.h to set up GPIOs	2017-01-06 18:14:00 +01:00
hda_verb.c
Kconfig	mb/intel/d510mo: Use native gfx initialization	2016-01-28 17:56:32 +01:00
Kconfig.name
mainboard.c	mb/intel/d510mo: Use native gfx initialization	2016-01-28 17:56:32 +01:00
Makefile.inc	sb/ich7: Use common/gpio.h to set up GPIOs	2017-01-06 18:14:00 +01:00
romstage.c	sb/ich7: Use common/gpio.h to set up GPIOs	2017-01-06 18:14:00 +01:00