coreboot-kgpe-d16/Documentation/mainboard/ocp/deltalake.md

6.4 KiB

OCP Delta Lake

This page describes coreboot support status for the OCP (Open Compute Project) Delta Lake server platform.

Introduction

OCP Delta Lake server platform is a component of multi-host server system Yosemite-V3. Both were announced by Facebook and Intel in OCP virtual summit 2020.

Delta Lake server is a single socket Cooper Lake Scalable Processor (CPX-SP) server.

Yosemite-V3 has multiple configurations. Depending on configurations, it may host up to 4 Delta Lake servers (blades) in one sled.

The Yosemite-V3 system is in mass production. Facebook, Intel and partners jointly develop Open System Firmware (OSF) solution on Delta Lake as an alternative solution. The OSF solution is based on FSP/coreboot/LinuxBoot stack. The OSF solution reached DVT exit equivalent status.

Required blobs

Delta Lake server OSF solution requires:

  • FSP blob: The blob (Intel Cooper Lake Scalable Processor Firmware Support Package) is not yet available to the public. It will be made public soon by Intel with redistributable license.
  • Microcode: Available through github.com:otcshare/Intel-Generic-Microcode.git.
  • ME binary: Ignition binary will be made public soon by Intel with redistributable license.
  • ACM binaries: only required for CBnT enablement. Available under NDA with Intel.

Payload

  • LinuxBoot: This is necessary only if you use LinuxBoot as coreboot payload. U-root as initramfs, is used in the joint development. It can be built following All about u-root.

Flashing coreboot

To do in-band FW image update, use flashrom: flashrom -p internal:ich_spi_mode=hwseq -c "Opaque flash chip" --ifd
-i bios --noverify-all -w

From OpenBMC, to update FW image: fw-util slotx --update bios

To power off/on the host: power-util slotx off power-util slotx on

To connect to console through SOL (Serial Over Lan): sol-util slotx

Firmware configurations

ChromeOS VPD is used to store most of the firmware configurations. RO_VPD region holds default values, while RW_VPD region holds customized values.

VPD variables supported are:

  • firmware_version: This variable holds overall firmware version. coreboot uses that value to populate smbios type 1 version field.
  • bmc_bootorder_override: When it's set to 1 IPMI OEM command can override boot order. The boot order override is done in the u-root LinuxBoot payload.
  • systemboot_log_level: u-root package systemboot log levels, would be mapped to quiet/verbose in systemboot as that is all we have for now. 5 to 8 would be mapped to verbose, 0 to 4 and 9 would be mapped to quiet.
  • VPDs affecting coreboot are listed/documented in src/mainboard/ocp/deltalake/vpd.h.

Working features

The solution is developed using LinuxBoot payload with Linux kernel 5.2.9, and u-root as initramfs.

  • SMBIOS:
    • Type 0 -- BIOS Information
    • Type 1 -- System Information
    • Type 2 -- Baseboard Information
    • Type 3 -- System Enclosure or Chassis
    • Type 4 -- Processor Information
    • Type 7 -- Cache Information
    • Type 8 -- Port Connector Information
    • Type 9 -- PCI Slot Information
    • Type 11 -- OEM String
    • Type 16 -- Physical Memory Array
    • Type 17 -- Memory Device
    • Type 19 -- Memory Array Mapped Address
    • Type 32 -- System Boot Information
    • Type 38 -- IPMI Device Information
    • Type 41 -- Onboard Devices Extended Information
    • Type 127 -- End-of-Table
  • BMC integration:
    • BMC readiness check
    • IPMI commands
    • watchdog timer
    • POST complete pin acknowledgement
    • Check BMC version: ipmidump -device
  • SEL record generation
  • Converged Bootguard and TXT (CBnT)
    • TPM
    • Bootguard profile 0T
    • TXT
    • SRTM
    • DRTM (verified through tboot)
      • unsigned KM/BPM generation
      • KM/BPM signing
      • memory secret clearance upon ungraceful shutdown
  • Early serial output
  • port 80h direct to GPIO
  • ACPI tables: APIC/DMAR/DSDT/EINJ/FACP/FACS/HEST/HPET/MCFG/SPMI/SRAT/SLIT/SSDT
  • Skipping memory training upon subsequent reboots by using MRC cache
  • BMC crash dump
  • Error injection through ITP
  • Versions
    • Check FSP version: cbmem | grep LB_TAG_PLATFORM_BLOB_VERSION
    • Check Microcode version: cat /proc/cpuinfo | grep microcode
  • Devices:
    • Boot drive
    • All 5 data drives
    • NIC card
  • Power button
  • localboot
  • netboot from IPv6
  • basic memory hardware error injection/detection (SMI handlers not upstreamed)
  • basic PCIe hardware error injection/detection (SMI handlers not upstreamed)

Stress/performance tests passed

  • OS warm reboot (1000 cycles)
  • DC reboot (1000 cycles)
  • AC reboot (1000 cycle)
  • Mprime test (6 hours)
  • StressAppTest (6 hours)
  • Ptugen (6 hours)

Performance on par with traditional firmware

  • coremark
  • FIO
  • Iperf(IPv6)
  • Linpack
  • Intel MLC (memory latency and bandwidth)
  • SpecCPU
  • stream

Other tests passed

  • Power
  • Thermal
  • coreboot address sanitizer (both romstage and ramstage)
  • Intel selftest tool (all errors analyzed; applicable errors clean)

Known issues

  • HECI access at OS run time:
    • spsInfoLinux64 command fail to return ME version
    • ptugen command fail to get memory power
  • CLTT (Closed Loop Thermal Throttling, eg. thermal protection for DIMMs)
  • ProcHot (thermal protection for processors)

Feature gaps

  • flashrom command not able to update ME region
  • ACPI BERT table
  • PCIe hotplug through VPP (Virtual Pin Ports)
  • PCIe Live Error Recovery
  • RO_VPD region as well as other RO regions are not write protected
  • Not able to selectively enable/disable core

Technology

+------------------------+---------------------------------------------+
| Processor (1 socket)   | Intel Cooper Lake Scalable Processor        |
+------------------------+---------------------------------------------+
| BMC                    | Aspeed AST 2500                             |
+------------------------+---------------------------------------------+
| PCH                    | Intel Lewisburg C620 Series                 |
+------------------------+---------------------------------------------+