No description
Find a file
Kevin Chiu 768f59a32f mb/google/zork: Configure EMMC_RESET_L to drive high
Configure EMMC_RESET_L (GPIO68) to drive high by default. As per JEDEC
specification for eMMC, RST_n_FUNCTION defaults to temporarily disable
reset using RST_n signal (which is connected to EMMC_RESET_L on
zork). Chrome OS platforms do not configure RST_n_FUNCTION thus making
the reset signal unused. The spec also says that there are no internal
pulls on the card and hence the RST_n signal should be driven
appropriately to prevent the input circuits from flowing unnecessary
leakage current.

Thus, even though the line remains unused, since it is connected in
hardware, this change drives EMMC_RESET_L to high.

BUG=b:169222156
BRANCH=zork
TEST=emerge-zork coreboot
     eMMC DUT reboot/suspend x100 iterations pass

Change-Id: I9feb826eec8a8cdad5e2bd7efcbb1dcf96185dfd
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-10-01 20:15:35 +00:00
3rdparty 3rdparty/blobs: advance submodule pointer 2020-09-30 21:45:06 +00:00
configs mb/emulation/qemu-i440fx: Remove TRACE=y from test build 2020-09-26 23:06:43 +00:00
Documentation lenovo/t440p: Add HDA verbs from the OEM firmware 2020-09-30 10:13:48 +00:00
LICENSES drivers: Use SPDX identifiers 2020-05-25 22:19:21 +00:00
payloads libpayload: use PRIu64 type to print u64 2020-09-30 10:16:44 +00:00
src mb/google/zork: Configure EMMC_RESET_L to drive high 2020-10-01 20:15:35 +00:00
tests device/dram: Add method for converting MHz to MT/s 2020-09-16 03:24:50 +00:00
util util/intelp2m/apl: Remove unused plat-spec function 2020-09-28 15:44:23 +00:00
.checkpatch.conf
.clang-format
.editorconfig Add .editorconfig file 2019-09-10 12:52:18 +00:00
.gitignore util: update .gitignore to ignore spd_tools binaries 2020-09-02 07:17:55 +00:00
.gitmodules 3rdparty: Add STM as a submodule 2020-09-30 10:17:03 +00:00
.gitreview
AUTHORS AUTHORS, util/: Drop individual copyright notices 2020-05-09 21:21:32 +00:00
COPYING
gnat.adc treewide: Remove "this file is part of" lines 2020-05-11 17:11:40 +00:00
MAINTAINERS MAINTAINERS: Update soc/mediatek maintainership 2020-08-26 07:35:21 +00:00
Makefile build system: Rely on xcompile for HOSTCC and HOSTCXX 2020-07-08 08:53:46 +00:00
Makefile.inc sconfig: Switch to getopt 2020-09-18 17:50:00 +00:00
README.md README.md: Remove link to deprecated wiki 2019-11-16 20:39:55 +00:00
toolchain.inc Remove MAYBE_STATIC_BSS and ENV_STAGE_HAS_BSS_SECTION 2020-05-26 15:04:08 +00:00

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.