6e56de3d20
Step 2: change the Persimmon code to adapt it to the new board's hardware.
The NF81-T56N-LF is a IPC form factor embedded board:
- AMD Fusion G-T56N (1.65 GHz dual core) APU
- 2x SO-DIMM sockets for DDR3 800-1066 SDRAM (Fixed at 1.5V)
- VGA and LVDS (via Analogix ANX3110)
- AMD A55E (Hudson-E1) southbridge
- 6x USB 2.0/1.1 ports
- 5x SATA3 6Gb/s, 1x mSATA socket
- 6-Channel HD Audio (via VIA VT1705)
- PCI and ISA (via ITE IT8888)??
- NEC uPD78F0532 microcontroller on I2C ("SEMA")??
- 2x RJ45 GbE (via Realtek RTL8111E x2)
- Fintek F71869AD Super I/O
- PS/2 KB/MS port
- RS232 header (via Unisonic UTC 75232 RS232 driver/receiver)
- GPIO header
- CIR header
- 1x MXIC MX25L1606E (SO8, soldered) 16 Mbit SPI flash (BIOS)
Note: MX25L1606E is 16Mbit, 8bits in a byte, so 2MB. Jetway *lies*
claiming the SPI flash is 16MB. They also use red pen over the chip
so you wont see this deceit.
Change-Id: I03ccc58bc782e800aeef0d19679ce060277b0c04
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/4801
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
29 lines
614 B
Text
29 lines
614 B
Text
if VENDOR_JETWAY
|
|
|
|
choice
|
|
prompt "Mainboard model"
|
|
|
|
config BOARD_JETWAY_J7F2
|
|
bool "J7F2"
|
|
config BOARD_JETWAY_J7F4K1G2E
|
|
bool "J7F4K1G2E"
|
|
config BOARD_JETWAY_J7F4K1G5D
|
|
bool "J7F4K1G5D"
|
|
config BOARD_JETWAY_PA78VM5
|
|
bool "PA78VM5 (Fam10)"
|
|
config BOARD_JETWAY_NF81_T56N_LF
|
|
bool "NF81_T56N_LF"
|
|
|
|
endchoice
|
|
|
|
source "src/mainboard/jetway/j7f2/Kconfig"
|
|
source "src/mainboard/jetway/j7f4k1g2e/Kconfig"
|
|
source "src/mainboard/jetway/j7f4k1g5d/Kconfig"
|
|
source "src/mainboard/jetway/pa78vm5/Kconfig"
|
|
source "src/mainboard/jetway/nf81-t56n-lf/Kconfig"
|
|
|
|
config MAINBOARD_VENDOR
|
|
string
|
|
default "Jetway"
|
|
|
|
endif # VENDOR_JETWAY
|