Go to file
Lee Leahy 87df8d08d6 soc/intel/quark: Enable Serial Port
Add the code to enable debug serial output using HSUART1:

*  Enable the code using Kconfig value ENABLE_BUILTIN_HSUART1
*  Note that the BIST value is always zero as validated in
   esram_init.inc
*  The initial TSC value is currently not saved!

Testing on Galileo:
*  Edit the src/mainboard/intel/galileo/Makefile.inc file
   *  Add "select ADD_FSP_PDAT_FILE"
   *  Add "select ADD_FSP_RAW_BIN"
   *  Add "select ADD_RMU_FILE"
*  Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
*  Place the pdat.bin files in the location specified by
   CONFIG_FSP_PDAT_FILE
*  Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
*  Testing is successful if serial output is present on HSUART1 at
   115200 baud, 8-bit, no parity

Change-Id: I7e6181e8b9bc901c3ab236f0b56534850bb6bfd0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13445
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-09 16:20:38 +01:00
3rdparty 3rdparty/chromeec: Add Chrome EC firmware sources 2016-02-05 10:34:17 +01:00
Documentation Documentation: x86 add sleep state and minimal memory setup 2016-02-05 22:57:25 +01:00
payloads libpayload: Add timer driver for armada38x 2016-02-04 11:32:22 +01:00
src soc/intel/quark: Enable Serial Port 2016-02-09 16:20:38 +01:00
util lint: test for assembler dialect switches 2016-02-07 00:36:46 +01:00
.clang-format
.gitignore .gitignore: add output files for various make targets 2015-11-24 22:35:34 +01:00
.gitmodules 3rdparty/chromeec: Add Chrome EC firmware sources 2016-02-05 10:34:17 +01:00
.gitreview
COPYING
MAINTAINERS MAINTAINERS: Designate Intel maintainers for FSP 1.0 Baytrail 2015-12-30 20:06:52 +01:00
Makefile build system: avoid setting HOSTCC to " gcc" 2016-02-02 14:35:11 +01:00
Makefile.inc build system: Add another post-processing step 2016-02-03 18:51:50 +01:00
README
toolchain.inc toolchain.inc: Update comments 2016-01-18 03:58:33 +01:00

README

-------------------------------------------------------------------------------
coreboot README
-------------------------------------------------------------------------------

coreboot is a Free Software project aimed at replacing the proprietary BIOS
(firmware) found in most computers.  coreboot performs a little bit of
hardware initialization and then executes additional boot logic, called a
payload.

With the separation of hardware initialization and later boot logic,
coreboot can scale from specialized applications that run directly
firmware, run operating systems in flash, load custom
bootloaders, or implement firmware standards, like PC BIOS services or
UEFI. This allows for systems to only include the features necessary
in the target application, reducing the amount of code and flash space
required.

coreboot was formerly known as LinuxBIOS.


Payloads
--------

After the basic initialization of the hardware has been performed, any
desired "payload" can be started by coreboot.

See http://www.coreboot.org/Payloads for a list of supported payloads.


Supported Hardware
------------------

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

 * http://www.coreboot.org/Supported_Motherboards
 * http://www.coreboot.org/Supported_Chipsets_and_Devices


Build Requirements
------------------

 * make
 * gcc / g++
   Because Linux distribution compilers tend to use lots of patches. coreboot
   does lots of "unusual" things in its build system, some of which break due
   to those patches, sometimes by gcc aborting, sometimes - and that's worse -
   by generating broken object code.
   Two options: use our toolchain (eg. make crosstools-i386) or enable the
   ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this
   case).
 * iasl (for targets with ACPI support)

Optional:

 * doxygen (for generating/viewing documentation)
 * gdb (for better debugging facilities on some targets)
 * ncurses (for 'make menuconfig' and 'make nconfig')
 * flex and bison (for regenerating parsers)


Building coreboot
-----------------

Please consult http://www.coreboot.org/Build_HOWTO for details.


Testing coreboot Without Modifying Your Hardware
------------------------------------------------

If you want to test coreboot without any risks before you really decide
to use it on your hardware, you can use the QEMU system emulator to run
coreboot virtually in QEMU.

Please see http://www.coreboot.org/QEMU for details.


Website and Mailing List
------------------------

Further details on the project, a FAQ, many HOWTOs, news, development
guidelines and more can be found on the coreboot website:

  http://www.coreboot.org

You can contact us directly on the coreboot mailing list:

  http://www.coreboot.org/Mailinglist


Copyright and License
---------------------

The copyright on coreboot is owned by quite a large number of individual
developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL).
Some files are licensed under the "GPL (version 2, or any later version)",
and some files are licensed under the "GPL, version 2". For some parts, which
were derived from other projects, other (GPL-compatible) licenses may apply.
Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.