377 lines
14 KiB
HTML
377 lines
14 KiB
HTML
<!DOCTYPE html>
|
|
<html>
|
|
<head>
|
|
<title>Development</title>
|
|
</head>
|
|
<body>
|
|
|
|
<h1>Intel® x86 coreboot/FSP Development Process</h1>
|
|
<p>
|
|
The x86 development process for coreboot is broken into the following components:
|
|
</p>
|
|
<ul>
|
|
<li>coreboot <a target="_blank" href="SoC/soc.html">SoC</a> development</li>
|
|
<li>coreboot <a target="_blank" href="Board/board.html">mainboard</a> development</li>
|
|
<li><a target="_blank" href="fsp1_1.html">FSP 1.1</a> integration</li>
|
|
</ul>
|
|
<p>
|
|
The development process has two main phases:
|
|
</p>
|
|
<ol>
|
|
<li>Minimal coreboot; This phase is single threaded</li>
|
|
<li>Adding coreboot features</li>
|
|
</ol>
|
|
|
|
<h2>Minimal coreboot</h2>
|
|
<p>
|
|
The combined steps below describe how to bring up a minimal coreboot for a
|
|
system-on-a-chip (SoC) and a development board:
|
|
</p>
|
|
<table>
|
|
<tr bgcolor="#ffffc0">
|
|
<td>The initial coreboot steps are single threaded!
|
|
The initial minimal FSP development is also single threaded.
|
|
Progress can speed up by adding more developers after the minimal coreboot/FSP
|
|
implementation reaches the payload.
|
|
</td>
|
|
</tr>
|
|
</table>
|
|
<ol>
|
|
<li>Get the necessary tools:
|
|
<ul>
|
|
<li>Linux: Use your package manager to install m4 bison flex and the libcurses development
|
|
package.
|
|
<ul>
|
|
<li>Ubuntu or other Linux distribution that use apt, run:
|
|
<pre><code>sudo apt-get install m4 bison flex libncurses5-dev
|
|
</code></pre>
|
|
</li>
|
|
</ul>
|
|
</li>
|
|
</ul>
|
|
</li>
|
|
<li>Build the cross tools for i386:
|
|
<ul>
|
|
<li>Linux:
|
|
<pre><code>make crossgcc-i386</code></pre>
|
|
To use multiple processors for the toolchain build (which takes a long time), use:
|
|
<pre><code>make crossgcc-i386 CPUS=N</code></pre>
|
|
where N is the number of cores to use for the build.
|
|
</li>
|
|
</ul>
|
|
</li>
|
|
<li>Get something to build:
|
|
<ol type="A">
|
|
<li><a target="_blank" href="fsp1_1.html#RequiredFiles">FSP 1.1</a> required files</li>
|
|
<li><a target="_blank" href="SoC/soc.html#RequiredFiles">SoC</a> required files</li>
|
|
<li><a target="_blank" href="Board/board.html#RequiredFiles">Board</a> required files</li>
|
|
</ol>
|
|
</li>
|
|
<li>Get result to start <a target="_blank" href="SoC/soc.html#Descriptor">booting</a></li>
|
|
<li><a target="_blank" href="SoC/soc.html#EarlyDebug">Early Debug</a></li>
|
|
<li>Implement and debug the <a target="_blank" href="SoC/soc.html#Bootblock">bootblock</a> code</li>
|
|
<li>Implement and debug the call to <a target="_blank" href="SoC/soc.html#TempRamInit">TempRamInit</a></li>
|
|
<li>Enable the serial port
|
|
<ol type="A">
|
|
<li>Power on, enable and configure GPIOs for the
|
|
<a target="_blank" href="Board/board.html#SerialOutput">debug serial UART</a>
|
|
</li>
|
|
<li>Add the <a target="_blank" href="SoC/soc.html#SerialOutput">serial outupt</a>
|
|
support to romstage
|
|
</li>
|
|
</ol>
|
|
</li>
|
|
<li>Enable <a target="_blank" href="fsp1_1.html#corebootFspDebugging">coreboot/FSP</a> debugging</li>
|
|
<li>Determine the <a target="_blank" href="SoC/soc.html#PreviousSleepState">Previous Sleep State</a></li>
|
|
<li>Enable DRAM:
|
|
<ol type="A">
|
|
<li>Implement the SoC
|
|
<a target="_blank" href="SoC/soc.html#MemoryInit">MemoryInit</a>
|
|
Support
|
|
</li>
|
|
<li>Implement the board support to read the
|
|
<a target="_blank" href="Board/board.html#SpdData">Memory Timing Data</a>
|
|
</li>
|
|
</ol>
|
|
</li>
|
|
<li>Disable the
|
|
<a target="_blank" href="SoC/soc.html#DisableShadowRom">Shadow ROM</a>
|
|
</li>
|
|
<li>Enable CONFIG_DISPLAY_MTRRS to verify the MTRR configuration</li>
|
|
<li>
|
|
Implement the .init routine for the
|
|
<a target="_blank" href="SoC/soc.html#ChipOperations">chip operations</a>
|
|
structure which calls FSP SiliconInit
|
|
</li>
|
|
<li>
|
|
Start ramstage's
|
|
<a target="_blank" href="SoC/soc.html#DeviceTree">device tree processing</a>
|
|
to display the PCI vendor and device IDs
|
|
</li>
|
|
<li>
|
|
Disable the
|
|
<a target="_blank" href="Board/board.html#DisablePciDevices">PCI devices</a>
|
|
</li>
|
|
<li>
|
|
Implement the
|
|
<a target="_blank" href="SoC/soc.html#MemoryMap">memory map</a>
|
|
</li>
|
|
<li>coreboot should now attempt to load the payload</li>
|
|
</ol>
|
|
|
|
|
|
|
|
<h2>Add coreboot Features</h2>
|
|
<p>
|
|
Most of the coreboot development gets done in this phase. Implementation tasks in this
|
|
phase are easily done in parallel.
|
|
</p>
|
|
<ul>
|
|
<li>Payload and OS Features:
|
|
<ul>
|
|
<li><a target="_blank" href="SoC/soc.html#AcpiTables">ACPI Tables</a></li>
|
|
<li><a target="_blank" href="SoC/soc.html#LegacyHardware">Legacy hardware</a> support</li>
|
|
</ul>
|
|
</li>
|
|
</ul>
|
|
|
|
|
|
|
|
<hr>
|
|
<table border="1">
|
|
<tr bgcolor="#c0ffc0">
|
|
<th colspan=3><h1>Features</h1></th>
|
|
</tr>
|
|
<tr bgcolor="#c0ffc0">
|
|
<th>SoC</th>
|
|
<th>Where</th>
|
|
<th>Testing</th>
|
|
</tr>
|
|
<tr>
|
|
<td>8254 Programmable Interval Timer</td>
|
|
<td><a target="_blank" href="SoC/soc.html#LegacyHardware">Legacy hardware</a> support</td>
|
|
<td><a target="_blank" href="SoC/quark.html#CorebootPayloadPkg">CorebootPayloadPkg</a> gets to shell prompt</td>
|
|
</tr>
|
|
<tr>
|
|
<td>8259 Programmable Interrupt Controller</td>
|
|
<td><a target="_blank" href="SoC/soc.html#LegacyHardware">Legacy hardware</a> support</td>
|
|
<td><a target="_blank" href="SoC/quark.html#CorebootPayloadPkg">CorebootPayloadPkg</a> gets to shell prompt</td>
|
|
</tr>
|
|
<tr>
|
|
<td>Cache-as-RAM</td>
|
|
<td>
|
|
<a target="_blank" href="SoC/soc.html#TempRamInit">Find</a>
|
|
FSP binary:
|
|
<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/cache_as_ram.inc;hb=HEAD#l38">cache_as_ram.inc</a><br>
|
|
Enable: FSP 1.1 <a target="_blank" href="SoC/soc.html#TempRamInit">TempRamInit</a>
|
|
called from
|
|
<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/cache_as_ram.inc;hb=HEAD#l73">cache_as_ram.inc</a><br>
|
|
Disable: FSP 1.1 TempRamExit called from
|
|
<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/after_raminit.S;hb=HEAD#l41">after_raminit.S</a><br>
|
|
</td>
|
|
<td>FindFSP: POST code 0x90
|
|
(<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l205">POST_FSP_TEMP_RAM_INIT</a>)
|
|
is displayed<br>
|
|
Enable: POST code
|
|
<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/cache_as_ram.inc;hb=HEAD#l151">0x2A</a>
|
|
is displayed<br>
|
|
Disable: CONFIG_DISPLAY_MTRRS=y, MTRRs displayed after call to TempRamExit
|
|
</td>
|
|
</tr>
|
|
<tr>
|
|
<td>Memory Map</td>
|
|
<td>
|
|
Implement a device driver for the
|
|
<a target="_blank" href="SoC/soc.html#MemoryMap">north cluster</a>
|
|
</td>
|
|
<td>coreboot displays the memory map correctly during the BS_WRITE_TABLES state</td>
|
|
</tr>
|
|
<tr>
|
|
<td>MTRRs</td>
|
|
<td>
|
|
Set values: src/drivers/intel/fsp1_1/stack.c/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/stack.c;hb=HEAD#l42">setup_stack_and_mtrrs</a><br>
|
|
Load values: src/drivers/intel/fsp1_1/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/after_raminit.S;hb=HEAD#l71">after_raminit.S</a>
|
|
</td>
|
|
<td>Set: Post code 0x91
|
|
(<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l213">POST_FSP_TEMP_RAM_EXIT</a>)
|
|
is displayed by
|
|
<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/after_raminit.S;hb=HEAD#l41">after_raminit.S</a><br>
|
|
Load: Post code 0x3C is displayed by
|
|
<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/after_raminit.S;hb=HEAD#l152">after_raminit.S</a><br>
|
|
and CONFIG_DISPLAY_MTRRS=y displays the correct memory regions</td>
|
|
</tr>
|
|
<tr>
|
|
<td>PCI Device Support</td>
|
|
<td>Implement a PCI <a target="_blank" href="SoC/soc.html#DeviceDrivers">device driver</a></td>
|
|
<td>The device is detected by coreboot and usable by the payload</td>
|
|
</tr>
|
|
<tr>
|
|
<td>Ramstage state machine</td>
|
|
<td>
|
|
Implement the chip and domain operations to start the
|
|
<a target="_blank" href="SoC/soc.html#DeviceTree">device tree</a>
|
|
processing
|
|
</td>
|
|
<td>
|
|
During the BS_DEV_ENUMERATE state, ramstage now display the device IDs
|
|
for the PCI devices on the bus.
|
|
</td>
|
|
</tr>
|
|
<tr>
|
|
<td>ROM Shadow<br>0x000E0000 - 0x000FFFFF</td>
|
|
<td>
|
|
Disable: src/soc/<Vendor>/<Chip Family>/romstage/romstage.c/<a target="_blank" href="SoC/soc.html#DisableShadowRom">soc_after_ram_init routine</a>
|
|
</td>
|
|
<td>Operates as RAM: Writes followed by a read to the 0x000E0000 - 0x000FFFFF region returns the value written</td>
|
|
</tr>
|
|
|
|
|
|
<tr bgcolor="#c0ffc0">
|
|
<th>Board</th>
|
|
<th>Where</th>
|
|
<th>Testing</th>
|
|
</tr>
|
|
<tr>
|
|
<td>Device Tree</td>
|
|
<td>
|
|
<a target="_blank" href="SoC/soc.html#DeviceTree">List</a> PCI vendor and device IDs by starting
|
|
the device tree processing<br>
|
|
<a target="_blank" href="Board/board.html#DisablePciDevices">Disable</a> PCI devices<br>
|
|
Enable: Implement a PCI <a target="_blank" href="SoC/soc.html#DeviceDrivers">device driver</a>
|
|
<td>
|
|
List: BS_DEV_ENUMERATE state displays PCI vendor and device IDs<br>
|
|
Disable: BS_DEV_ENUMERATE state shows the devices as disabled<br>
|
|
Enable: BS_DEV_ENUMERATE state shows the device as on and the device works for the payload
|
|
</td>
|
|
</tr>
|
|
<tr>
|
|
<td>DRAM</td>
|
|
<td>
|
|
Load SPD data: src/soc/mainboard/<Vendor>/<Board>/spd/<a target="_blank" href="Board/board.html#SpdData">spd.c</a><br>
|
|
UPD Setup:
|
|
<ul>
|
|
<li>src/soc<Vendor>//<Chip Family>/romstage/<a target="_blank" href="SoC/soc.html#MemoryInit">romstage.c</a></li>
|
|
<li>src/mainboard/<Vendor>/<Board>/<a target="_blank" href="Board/board.html#SpdData">romstage.c</a></li>
|
|
</ul>
|
|
FSP 1.1 MemoryInit called from src/drivers/intel/fsp1_1/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l126">raminit.c</a>
|
|
</td>
|
|
<td>Select the following Kconfig values
|
|
<ul>
|
|
<li>DISPLAY_HOBS</li>
|
|
<li>DISPLAY_UPD_DATA</li>
|
|
</ul>
|
|
Testing successful if:
|
|
<ul>
|
|
<li>MemoryInit UPD values are correct</li>
|
|
<li>MemoryInit returns 0 (success) and</li>
|
|
<li>The the message "ERROR - coreboot's requirements not met by FSP binary!"
|
|
is not displayed
|
|
</li>
|
|
</ul>
|
|
</td>
|
|
</tr>
|
|
<tr>
|
|
<td>Serial Port</td>
|
|
<td>
|
|
SoC <a target="_blank" href="SoC/soc.html#SerialOutput">Support</a><br>
|
|
Enable: src/soc/mainboard/<Board>/com_init.c/<a target="_blank" href="Board/board.html#SerialOutput">car_mainboard_pre_console_init</a>
|
|
</td>
|
|
<td>Debug serial output works</td>
|
|
</tr>
|
|
|
|
|
|
<tr bgcolor="#c0ffc0">
|
|
<th>Payload</th>
|
|
<th>Where</th>
|
|
<th>Testing</th>
|
|
</tr>
|
|
<tr>
|
|
<td>ACPI Tables</td>
|
|
<td>
|
|
SoC <a target="_blank" href="SoC/soc.html#AcpiTables">Support</a><br>
|
|
</td>
|
|
<td>Verified by payload or OS</td>
|
|
</tr>
|
|
|
|
|
|
<tr bgcolor="#c0ffc0">
|
|
<th>FSP</th>
|
|
<th>Where</th>
|
|
<th>Testing</th>
|
|
</tr>
|
|
<tr>
|
|
<td>TempRamInit</td>
|
|
<td>FSP <a target="_blank" href="SoC/soc.html#TempRamInit">TempRamInit</a></td>
|
|
<td>FSP binary found: POST code 0x90
|
|
(<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l205">POST_FSP_TEMP_RAM_INIT</a>)
|
|
is displayed<br>
|
|
TempRamInit successful: POST code
|
|
<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/cache_as_ram.inc;hb=HEAD#l151">0x2A</a>
|
|
is displayed<br>
|
|
</td>
|
|
</tr>
|
|
<tr>
|
|
<td>MemoryInit</td>
|
|
<td><a target="_blank" href="SoC/soc.html#MemoryInit">SoC</a> support<br>
|
|
<a target="_blank" href="Board/board.html#SpdData">Board</a> support<br>
|
|
</td>
|
|
<td>Select the following Kconfig values
|
|
<ul>
|
|
<li>DISPLAY_HOBS</li>
|
|
<li>DISPLAY_UPD_DATA</li>
|
|
</ul>
|
|
Testing successful if:
|
|
<ul>
|
|
<li>MemoryInit UPD values are correct</li>
|
|
<li>MemoryInit returns 0 (success) and</li>
|
|
<li>The the message "ERROR - coreboot's requirements not met by FSP binary!"
|
|
is not displayed
|
|
</li>
|
|
</ul>
|
|
</td>
|
|
</tr>
|
|
<tr>
|
|
<td>TempRamExit</td>
|
|
<td>src/drivers/intel/fsp1_1/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/after_raminit.S;hb=HEAD#l51">after_raminit.S</a></td>
|
|
<td>Post code 0x91
|
|
(<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l212">POST_FSP_TEMP_RAM_EXIT</a>)
|
|
is displayed before calling TempRamExit by
|
|
<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/after_raminit.S;hb=HEAD#l141">after_raminit.S</a>,
|
|
CONFIG_DISPLAY_MTRRS=y displays the correct memory regions and
|
|
Post code 0x39 is displayed by
|
|
<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/after_raminit.S;hb=HEAD#l141">after_raminit.S</a><br>
|
|
</td>
|
|
</tr>
|
|
<tr>
|
|
<td>SiliconInit</td>
|
|
<td>
|
|
Implement the .init routine for the
|
|
<a target="_blank" href="SoC/soc.html#ChipOperations">chip operations</a> structure
|
|
</td>
|
|
<td>During BS_DEV_INIT_CHIPS state, SiliconInit gets called and returns 0x00000000</td>
|
|
</tr>
|
|
<tr>
|
|
<td>FspNotify</td>
|
|
<td>
|
|
The code which calls FspNotify is located in
|
|
src/drivers/intel/fsp1_1/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/fsp_util.c;hb=HEAD#l182">fsp_util.c</a>.
|
|
The fsp_notify_boot_state_callback routine is called three times as specified
|
|
by the BOOT_STATE_INIT_ENTRY macros below the routine.
|
|
</td>
|
|
<td>
|
|
The FspNotify routines are called during:
|
|
<ul>
|
|
<li>BS_DEV_RESOURCES - on exit</li>
|
|
<li>BS_PAYLOAD_LOAD - on exit</li>
|
|
<li>BS_OS_RESUME - on entry (S3 resume)</li>
|
|
</ul>
|
|
</td>
|
|
</tr>
|
|
</table>
|
|
|
|
|
|
|
|
<hr>
|
|
<p>Modified: 4 March 2016</p>
|
|
</body>
|
|
</html> |