coreboot-kgpe-d16/util/flashrom
FENG yu ning a8faa2a479 * add a generic preop-opcode-pair table.
* rename ich_check_opcodes to ich_init_opcodes.

* let ich_init_opcodes do not need to access flashchip structure:
  . move the definition of struct preop_opcode_pair to a better place
  . remove preop_opcode_pairs from 'struct flashchip'
  . modify ich_init_opcodes and generate_opcodes so that they do not access the flashchip structure

* call ich_init_opcodes during chipset enable. Now OPCODES generation mechanism works.

* fix a coding style mistake.

Signed-off-by: FENG yu ning <fengyuning1984@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3814 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-15 02:32:11 +00:00
..
82802ab.c Flash pages, which where excluded from updating using the exclude or the 2008-04-24 09:07:57 +00:00
COPYING Add a copy of the GPL in the flashrom repository as it's an independent 2007-09-08 14:36:01 +00:00
Makefile Replace #ifdefs for sc520 systems by run time probing. 2008-12-03 21:24:40 +00:00
README Some flashrom documentation fixes, and removal of duplicated info (trivial). 2008-06-22 18:50:25 +00:00
am29f040b.c Add '(C)' where it's missing (for consistency reasons). 2007-09-09 20:21:05 +00:00
board_enable.c Coding-style fixes for flashrom, partly indent-aided (trivial). 2008-10-18 21:14:13 +00:00
cbtable.c rename linuxbios_* files in utils repository. 2008-01-18 16:17:44 +00:00
chipset_enable.c * add a generic preop-opcode-pair table. 2008-12-15 02:32:11 +00:00
coreboot_tables.h rename linuxbios_* files in utils repository. 2008-01-18 16:17:44 +00:00
en29f002a.c Activate proper support for EN29F002(A)(N)[BT]. 2008-09-26 13:19:02 +00:00
flash.h * add a generic preop-opcode-pair table. 2008-12-15 02:32:11 +00:00
flashchips.c Add 28 flash chips of the MX29 series to the flashrom ID table and 2008-12-10 10:32:05 +00:00
flashrom.8 Some flashrom documentation fixes, and removal of duplicated info (trivial). 2008-06-22 18:50:25 +00:00
flashrom.c flashrom: Display test status in -L chip listing 2008-12-06 01:37:09 +00:00
ichspi.c * add a generic preop-opcode-pair table. 2008-12-15 02:32:11 +00:00
it87spi.c Coding-style fixes for flashrom, partly indent-aided (trivial). 2008-10-18 21:14:13 +00:00
jedec.c flashrom: Increase delay in probe_jedec() after Product ID Entry to 10ms 2008-06-24 02:09:09 +00:00
layout.c Coding-style fixes for flashrom, partly indent-aided (trivial). 2008-10-18 21:14:13 +00:00
m29f400bt.c for some reasons the externals did not get committed. 2008-01-18 15:33:10 +00:00
mx29f002.c Some cosmetic cleanups in the flashrom code and output. 2007-10-17 23:55:15 +00:00
pm49fl00x.c Coding-style fixes for flashrom, partly indent-aided (trivial). 2008-10-18 21:14:13 +00:00
sb600spi.c Copyright update by Jason Wang for freshly written sb600 code. 2008-11-29 15:07:15 +00:00
sharplhf00l04.c Revert the delete of 82802ab.c in r3137. 2008-03-14 00:02:25 +00:00
spi.c Add support for the AMD/ATI SB600 southbridge SPI functionality. 2008-11-28 21:36:51 +00:00
spi.h Declare special commands to support the Atmel AT25F512A. 2008-11-28 23:47:55 +00:00
sst28sf040.c Some cosmetic cleanups in the flashrom code and output. 2007-10-17 23:55:15 +00:00
sst39sf020.c I looked at the datasheet and erase_sector_39sf020() is totally and 2008-05-16 21:11:53 +00:00
sst49lf040.c Reduce serial output, otherwise flashing will fail very often (trivial). 2008-10-21 22:09:02 +00:00
sst49lfxxxc.c Some cosmetic cleanups in the flashrom code and output. 2007-10-17 23:55:15 +00:00
sst_fwhub.c check whether SST FWH chip was successfully erased on flashchip -E, too 2008-03-16 19:44:13 +00:00
stm50flw0x0x.c Coding-style fixes for flashrom, partly indent-aided (trivial). 2008-10-18 21:14:13 +00:00
udelay.c Coding-style fixes for flashrom, partly indent-aided (trivial). 2008-10-18 21:14:13 +00:00
w29ee011.c Coding-style fixes for flashrom, partly indent-aided (trivial). 2008-10-18 21:14:13 +00:00
w39v040c.c flashrom: Winbond W39V040C and MSI K8T Neo2-F 2008-07-21 17:48:40 +00:00
w39v080fa.c Coding-style fixes for flashrom, partly indent-aided (trivial). 2008-10-18 21:14:13 +00:00
w49f002u.c Some cosmetic cleanups in the flashrom code and output. 2007-10-17 23:55:15 +00:00

README

-------------------------------------------------------------------------------
Flashrom README
-------------------------------------------------------------------------------

Flashrom is a universal flash programming utility for DIP, PLCC, or SPI
flash ROM chips. It can be used to flash BIOS/coreboot/firmware images.

(see http://coreboot.org for details on coreboot)


Build Requirements
------------------

To build the flashrom utility you need to install the following packages:

* pciutils
* pciutils-devel / pciutils-dev / libpci-dev
* zlib-devel / zlib1g-dev


Usage
-----

 $ flashrom [-rwvEVfh] [-c chipname] [-s exclude_start] [-e exclude_end]
            [-m [vendor:]part] [-l file.layout] [-i imagename] [file]
   -r | --read:                      read flash and save into file
   -w | --write:                     write file into flash (default when
                                     file is specified)
   -v | --verify:                    verify flash against file
   -E | --erase:                     erase flash device
   -V | --verbose:                   more verbose output
   -c | --chip <chipname>:           probe only for specified flash chip
   -s | --estart <addr>:             exclude start position
   -e | --eend <addr>:               exclude end postion
   -m | --mainboard <[vendor:]part>: override mainboard settings
   -f | --force:                     force write without checking image
   -l | --layout <file.layout>:      read rom layout from file
   -i | --image <name>:              only flash image name from flash layout

 If no file is specified, then all that happens
 is that flash info is dumped and the flash chip is set to writable.


coreboot Table and Mainboard Identification
--------------------------------------------

Flashrom reads the coreboot table to determine the current mainboard
(parse DMI as well in future?). If no coreboot table could be read
or if you want to override these values, you can specify -m, e.g.:

 $ flashrom -w --mainboard AGAMI:ARUMA agami_aruma.rom

See the 'Supported mainboards' section in the output of 'flashrom -L' for
a list of boards which require the specification of the board name, if no
coreboot table is found.


ROM Layout Support
------------------

Flashrom supports ROM layouts. This allows you to flash certain parts of
the flash chip only. A ROM layout file looks like follows:

  00000000:00008fff gfxrom
  00009000:0003ffff normal
  00040000:0007ffff fallback

  i.e.:
  startaddr:endaddr name

  All addresses are offsets within the file, not absolute addresses!
  
If you only want to update the normal image in a ROM you can say:

  flashrom -w --layout rom.layout --image normal agami_aruma.rom
     
To update normal and fallback but leave the VGA BIOS alone, say:

  flashrom -w -l rom.layout -i normal -i fallback agami_aruma.rom
 
Currently overlapping sections are not supported.

ROM layouts should replace the -s and -e option since they are more 
flexible and they should lead to a ROM update file format with the 
ROM layout and the ROM image in one file (cpio, zip or something?).


Disk on Chip support
--------------------

Disk on Chip support was removed from flashrom in r3382. It had already
been disabled by default in flashrom for several years because the code
was considered unstable and incomplete. The products intended to work
have been End-Of-Lifed by the manufacturer for a long time.


Supported Flash Chips / Chipsets / Mainboards
---------------------------------------------

Please check the output of 'flashrom -L' for the list of supported
flash chips, chipsets/southbridges, and mainboards.

See also http://coreboot.org/Flashrom for more details.