a449290ca2
Instead of maintaining this in 3rdparty/blobs use the
3rdparty/intel-microcode which is maintained by Intel.
This allows for some finegrained control where family+model span
multiple targets.
Microcode updates present in
3rdparty/blobs/soc/intel/{baytrail,broadwell} are left out since those
contain updates not present in the Intel repo. Those are presumably
early CPU samples that did not end up in products.
The following MCU are get a new revision:
old:
sig 0x000306c3, pf_mask 0x32, 2018-04-02, rev 0x0025, size 23552
sig 0x00040651, pf_mask 0x72, 2018-04-02, rev 0x0024, size 22528
sig 0x000206a7, pf_mask 0x12, 2018-04-10, rev 0x002e, size 12288
sig 0x000306a9, pf_mask 0x12, 2018-04-10, rev 0x0020, size 13312
sig 0x000706a1, pf_mask 0x01, 2018-05-22, rev 0x0028, size 73728
sig 0x000506c9, pf_mask 0x03, 2018-05-11, rev 0x0032, size 16384
sig 0x000506ca, pf_mask 0x03, 2018-05-11, rev 0x000c, size 14336
sig 0x000806e9, pf_mask 0xc0, 2018-03-24, rev 0x008e, size 98304
sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304
sig 0x000906ea, pf_mask 0x22, 2018-05-02, rev 0x0096, size 97280
sig 0x000906eb, pf_mask 0x02, 2018-03-24, rev 0x008e, size 98304
sig 0x00050665, pf_mask 0x10, 2018-04-20, rev 0xe00000a, size 18432
sig 0x000506e3, pf_mask 0x36, 2018-04-17, rev 0x00c6, size 99328
sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304
sig 0x000406e3, pf_mask 0xc0, 2018-04-17, rev 0x00c6, size 99328
new:
sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552
sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504
sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288
sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336
sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728
sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408
sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360
sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328
sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328
sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304
sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328
sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456
sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352
sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328
sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352
Change-Id: Idcfb3c3c774e0b47637e1b5308c28002aa044f1c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
||
|---|---|---|
| 3rdparty | ||
| Documentation | ||
| configs | ||
| payloads | ||
| src | ||
| util | ||
| .checkpatch.conf | ||
| .clang-format | ||
| .gitignore | ||
| .gitmodules | ||
| .gitreview | ||
| COPYING | ||
| MAINTAINERS | ||
| Makefile | ||
| Makefile.inc | ||
| README.md | ||
| gnat.adc | ||
| toolchain.inc | ||
README.md
coreboot README
coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.
With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.
coreboot was formerly known as LinuxBIOS.
Payloads
After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.
See https://www.coreboot.org/Payloads for a list of supported payloads.
Supported Hardware
coreboot supports a wide range of chipsets, devices, and mainboards.
For details please consult:
- https://www.coreboot.org/Supported_Motherboards
- https://www.coreboot.org/Supported_Chipsets_and_Devices
Build Requirements
- make
- gcc / g++
Because Linux distribution compilers tend to use lots of patches. coreboot
does lots of "unusual" things in its build system, some of which break due
to those patches, sometimes by gcc aborting, sometimes - and that's worse -
by generating broken object code.
Two options: use our toolchain (eg. make crosstools-i386) or enable the
ANY_TOOLCHAINKconfig option if you're feeling lucky (no support in this case). - iasl (for targets with ACPI support)
- pkg-config
- libssl-dev (openssl)
Optional:
- doxygen (for generating/viewing documentation)
- gdb (for better debugging facilities on some targets)
- ncurses (for
make menuconfigandmake nconfig) - flex and bison (for regenerating parsers)
Building coreboot
Please consult https://www.coreboot.org/Build_HOWTO for details.
Testing coreboot Without Modifying Your Hardware
If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.
Please see https://www.coreboot.org/QEMU for details.
Website and Mailing List
Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:
You can contact us directly on the coreboot mailing list:
https://www.coreboot.org/Mailinglist
Copyright and License
The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.
coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.
This makes the resulting coreboot images licensed under the GPL, version 2.