2.3 KiB
Facebook FBG-1701
This page describes how to run coreboot on the Facebook FBG1701.
FBG1701 are assembled with different onboard memory modules: Rev 1.0 Onboard Samsung K4B8G1646D-MYKO memory Rev 1.1 and 1.2 Onboard Micron MT41K512M16HA-125A memory Rev 1.3 and 1.4 Onboard Kingston B5116ECMDXGGB memory
Required blobs
This board currently requires: fsp blob 3rdparty/fsp/BraswellFspBinPkg/FspBin/BSWFSP.fd Microcode 3rdparty/intel-microcode/intel-ucode/06-4c-04
Flashing coreboot
Internal programming
The main SPI flash can be accessed using flashrom.
External programming
The system has an internal flash chip which is a 8 MiB soldered SOIC-8 chip. This chip is located on the top middle side of the board. It's located between SoC and Q7 connector. Use clip (or solder wires) to program the chip. Specifically, it's a Winbond W25Q64FW (1.8V), whose datasheet can be found here.
The system has an external flash chip which is a 8 MiB soldered SOIC-8 chip. This chip is located in the middle of carrier board close to the flex cable connection. Specifically, it's a Winbond W25Q64FV (3.3V), whose datasheet can be found here.
Known issues
- None
Untested
- hardware monitor
- SDIO
- Full Embedded Controller support
Working
- USB
- Gigabit Ethernet
- integrated graphics
- flashrom
- external graphics
- PCIe
- eMMC
- SATA
- serial port
- SMBus
- HDA
- initialization with FSP MR2
- SeaBIOS payload
- Embedded Linux (Ubuntu 4.15+)
Technology
+------------------+--------------------------------------------------+
| SoC | Intel Atom Processor N3710 |
+------------------+--------------------------------------------------+
| CPU | Intel Braswell (N3710) |
+------------------+--------------------------------------------------+
| Super I/O, EC | ITE8528 |
+------------------+--------------------------------------------------+
| Coprocessor | Intel Management Engine |
+------------------+--------------------------------------------------+