Go to file
Jianjun Wang acf16bf4f6 soc/mediatek/mt8195: Add early init support
Add early init support for MT8195 platform.

TEST=Build pass and boot up to kernel successfully via SSD on Dojo
board, here is the SSD information in boot log:
 == NVME IDENTIFY CONTROLLER DATA ==
    PCI VID   : 0x15b7
    PCI SSVID : 0x15b7
    SN        : 21517J440114
    MN        : WDC PC SN530 SDBPTPZ-256G-1006
    RAB       : 0x4
    AERL      : 0x7
    SQES      : 0x66
    CQES      : 0x44
    NN        : 0x1
Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006

BUG=b:178565024
BRANCH=cherry

Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: I4eb7da53ff76c385cab18bbf84970e96b61662ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29 15:41:37 +00:00
3rdparty Update blobs submodule to upstream master 2022-03-24 17:20:58 +00:00
Documentation Documentation: gpio: Update table as per coreboot guidelines 2022-03-29 13:56:58 +00:00
LICENSES
configs src/mainboard/emulation/qemu-power9/*: add QEMU POWER9 mainboard 2022-02-11 20:14:55 +00:00
payloads libpayload/vboot: Fix include paths fixup macro 2022-03-25 19:25:36 +00:00
spd spd/lp5: Add new part MT62F2G32D8DR-031 2022-03-10 15:16:52 +00:00
src soc/mediatek/mt8195: Add early init support 2022-03-29 15:41:37 +00:00
tests tests/lib: Add space before single line comment termination 2022-03-27 15:33:39 +00:00
util amdfwtool: Clear the whole byte of EFS_GEN 2022-03-29 15:41:20 +00:00
.checkpatch.conf lint: checkpatch: Only exclude specific src/vendorcode/ subdirectories 2021-04-06 16:04:41 +00:00
.clang-format
.editorconfig
.gitignore
.gitmodules .gitmodules: Update intel-microcode submodule to track branch=main 2021-06-09 17:20:50 +00:00
.gitreview
.mailmap .mailmap: Add a .mailmap file for git 2022-03-08 18:53:47 +00:00
AUTHORS
COPYING
MAINTAINERS MAINTAINERS: Remove myself 2022-03-14 15:53:10 +00:00
Makefile Makefile: Add .SECONDARY 2022-02-28 22:00:42 +00:00
Makefile.inc $top/Makefile.inc: Move common folder before other sibling ones 2022-03-25 19:25:18 +00:00
README.md
gnat.adc
toolchain.inc build system: immediately report what users are supposed to look into 2021-10-18 16:39:25 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.