222 lines
7.5 KiB
Markdown
222 lines
7.5 KiB
Markdown
# SMM based flash storage driver Version 2
|
|
|
|
This documents the API exposed by the x86 system management based
|
|
storage driver.
|
|
|
|
## SMMSTOREv2
|
|
|
|
SMMSTOREv2 is a [SMM] mediated driver to read from, write to and erase
|
|
a predefined region in flash. It can be enabled by setting
|
|
`CONFIG_SMMSTORE=y` and `CONFIG_SMMSTORE_V2=y` in menuconfig.
|
|
|
|
This can be used by the OS or the payload to implement persistent
|
|
storage to hold for instance configuration data, without needing to
|
|
implement a (platform specific) storage driver in the payload itself.
|
|
|
|
### Storage size and alignment
|
|
|
|
SMMSTORE version 2 requires a minimum alignment of 64 KiB, which should
|
|
be supported by all flash chips. Not having to perform read-modify-write
|
|
operations is desired, as it reduces complexity and potential for bugs.
|
|
|
|
This can be used by a FTW (FaultTolerantWrite) implementation that uses
|
|
at least two regions in an A/B update scheme. The FTW implementation in
|
|
EDK2 uses three different regions in the store:
|
|
|
|
- The variable store
|
|
- The FTW spare block
|
|
- The FTW working block
|
|
|
|
All regions must be block-aligned, and the FTW spare size must be larger
|
|
than that of the variable store. FTW working block can be much smaller.
|
|
With 64 KiB as block size, the minimum size of the FTW-enabled store is:
|
|
|
|
- The variable store: 1 block = 64 KiB
|
|
- The FTW spare block: 2 blocks = 2 * 64 KiB
|
|
- The FTW working block: 1 block = 64 KiB
|
|
|
|
Therefore, the minimum size for EDK2 FTW is 4 blocks, or 256 KiB.
|
|
|
|
## API
|
|
|
|
The API provides read and write access to an unformatted block storage.
|
|
|
|
### Storage region
|
|
|
|
By default SMMSTOREv2 will operate on a separate FMAP region called
|
|
`SMMSTORE`. The default generated FMAP will include such a region. On
|
|
systems with a locked FMAP, e.g. in an existing vboot setup with a
|
|
locked RO region, the option exists to add a cbfsfile called `smm_store`
|
|
in the `RW_LEGACY` (if CHROMEOS) or in the `COREBOOT` FMAP regions. It
|
|
is recommended for new builds using a handcrafted FMD that intend to
|
|
make use of SMMSTORE to include a sufficiently large `SMMSTORE` FMAP
|
|
region. It is mandatory to align the `SMMSTORE` region to 64KiB for
|
|
compatibility with the largest flash erase operation.
|
|
|
|
When a default generated FMAP is used, the size of the FMAP region is
|
|
equal to `CONFIG_SMMSTORE_SIZE`. UEFI payloads expect at least 64 KiB.
|
|
To support a fault tolerant write mechanism, at least a multiple of
|
|
this size is recommended.
|
|
|
|
### Communication buffer
|
|
|
|
To prevent malicious ring0 code to access arbitrary memory locations,
|
|
SMMSTOREv2 uses a communication buffer in CBMEM/HOB for all transfers.
|
|
This buffer has to be at least 64 KiB in size and must be installed
|
|
before calling any of the SMMSTORE read or write operations. Usually,
|
|
coreboot will install this buffer to transfer data between ring0 and
|
|
the [SMM] handler.
|
|
|
|
In order to get the communication buffer address, the payload or OS
|
|
has to read the coreboot table with tag `0x0039`, containing:
|
|
|
|
```C
|
|
struct lb_smmstorev2 {
|
|
uint32_t tag;
|
|
uint32_t size;
|
|
uint32_t num_blocks; /* Number of writeable blocks in SMM */
|
|
uint32_t block_size; /* Size of a block in byte. Default: 64 KiB */
|
|
uint32_t mmap_addr; /* MMIO address of the store for read only access */
|
|
uint32_t com_buffer; /* Physical address of the communication buffer */
|
|
uint32_t com_buffer_size; /* Size of the communication buffer in byte */
|
|
uint8_t apm_cmd; /* The command byte to write to the APM I/O port */
|
|
uint8_t unused[3]; /* Set to zero */
|
|
};
|
|
```
|
|
|
|
The absence of this coreboot table entry indicates that there's no
|
|
SMMSTOREv2 support.
|
|
|
|
### Blocks
|
|
|
|
The SMMSTOREv2 splits the SMMSTORE FMAP partition into smaller chunks
|
|
called *blocks*. Every block is at least the size of 64KiB to support
|
|
arbitrary NOR flash erase ops. A payload or OS must make no further
|
|
assumptions about the block or communication buffer size.
|
|
|
|
### Generating the SMI
|
|
|
|
SMMSTOREv2 is called via an SMI, which is generated via a write to the
|
|
IO port defined in the smi_cmd entry of the FADT ACPI table. `%al`
|
|
contains `APM_CNT_SMMSTORE=0xed` and is written to the smi_cmd IO
|
|
port. `%ah` contains the SMMSTOREv2 command. `%ebx` contains the
|
|
parameter buffer to the SMMSTOREv2 command.
|
|
|
|
### Return values
|
|
|
|
If a command succeeds, SMMSTOREv2 will return with
|
|
`SMMSTORE_RET_SUCCESS=0` in `%eax`. On failure SMMSTORE will return
|
|
`SMMSTORE_RET_FAILURE=1`. For unsupported SMMSTORE commands
|
|
`SMMSTORE_REG_UNSUPPORTED=2` is returned.
|
|
|
|
**NOTE 1**: The caller **must** check the return value and should make
|
|
no assumption on the returned data if `%eax` does not contain
|
|
`SMMSTORE_RET_SUCCESS`.
|
|
|
|
**NOTE 2**: If the SMI returns without changing `%ax`, it can be assumed
|
|
that the SMMSTOREv2 feature is not installed.
|
|
|
|
### Calling arguments
|
|
|
|
SMMSTOREv2 supports 3 subcommands that are passed via `%ah`, the
|
|
additional calling arguments are passed via `%ebx`.
|
|
|
|
**NOTE**: The size of the struct entries are in the native word size of
|
|
smihandler. This means 32 bits in almost all cases.
|
|
|
|
#### - SMMSTORE_CMD_INIT = 4
|
|
|
|
This installs the communication buffer to use and thus enables the
|
|
SMMSTORE handler. This command can only be executed once and is done
|
|
by the firmware. Calling this function at runtime has no effect.
|
|
|
|
The additional parameter buffer `%ebx` contains a pointer to the
|
|
following struct:
|
|
|
|
```C
|
|
struct smmstore_params_init {
|
|
uint32_t com_buffer;
|
|
uint32_t com_buffer_size;
|
|
} __packed;
|
|
```
|
|
|
|
INPUT:
|
|
- `com_buffer`: Physical address of the communication buffer (CBMEM)
|
|
- `com_buffer_size`: Size in bytes of the communication buffer
|
|
|
|
#### - SMMSTORE_CMD_RAW_READ = 5
|
|
|
|
SMMSTOREv2 allows reading arbitrary data. It is up to the caller to
|
|
initialize the store with meaningful data before using it.
|
|
|
|
The additional parameter buffer `%ebx` contains a pointer to the
|
|
following struct:
|
|
|
|
```C
|
|
struct smmstore_params_raw_read {
|
|
uint32_t bufsize;
|
|
uint32_t bufoffset;
|
|
uint32_t block_id;
|
|
} __packed;
|
|
```
|
|
|
|
INPUT:
|
|
- `bufsize`: Size of data to read within the communication buffer
|
|
- `bufoffset`: Offset within the communication buffer
|
|
- `block_id`: Block to read from
|
|
|
|
#### - SMMSTORE_CMD_RAW_WRITE = 6
|
|
|
|
SMMSTOREv2 allows writing arbitrary data. It is up to the caller to
|
|
erase a block before writing it.
|
|
|
|
The additional parameter buffer `%ebx` contains a pointer to
|
|
the following struct:
|
|
|
|
```C
|
|
struct smmstore_params_raw_write {
|
|
uint32_t bufsize;
|
|
uint32_t bufoffset;
|
|
uint32_t block_id;
|
|
} __packed;
|
|
```
|
|
|
|
INPUT:
|
|
- `bufsize`: Size of data to write within the communication buffer
|
|
- `bufoffset`: Offset within the communication buffer
|
|
- `block_id`: Block to write to
|
|
|
|
#### - SMMSTORE_CMD_RAW_CLEAR = 7
|
|
|
|
SMMSTOREv2 allows clearing blocks. A cleared block will read as `0xff`.
|
|
By providing multiple blocks the caller can implement a fault tolerant
|
|
write mechanism. It is up to the caller to clear blocks before writing
|
|
to them.
|
|
|
|
|
|
```C
|
|
struct smmstore_params_raw_clear {
|
|
uint32_t block_id;
|
|
} __packed;
|
|
```
|
|
|
|
INPUT:
|
|
- `block_id`: Block to erase
|
|
|
|
#### Security
|
|
|
|
Pointers provided by the payload or OS are checked to not overlap with
|
|
SMM. This protects the SMM handler from being compromised.
|
|
|
|
As all information is exchanged using the communication buffer and
|
|
coreboot tables, there's no risk that a malicious application capable
|
|
of issuing SMIs could extract arbitrary data or modify the currently
|
|
running kernel.
|
|
|
|
## External links
|
|
|
|
* [A Tour Beyond BIOS Implementing UEFI Authenticated Variables in SMM with EDKI](https://software.intel.com/sites/default/files/managed/cf/ea/a_tour_beyond_bios_implementing_uefi_authenticated_variables_in_smm_with_edkii.pdf)
|
|
Note that this differs significantly from coreboot's implementation.
|
|
|
|
[SMM]: ../security/smm.md
|