b238caaaca
This makes it clear what this function pointer is used for. Change-Id: I2090e164edee513e05a9409d6c7d18c2cdeb8662 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51009 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
783 lines
22 KiB
C
783 lines
22 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
|
|
#include <console/console.h>
|
|
#include <bootmode.h>
|
|
#include <device/mmio.h>
|
|
#include <delay.h>
|
|
#include <arch/io.h>
|
|
#include <device/device.h>
|
|
#include <device/pci.h>
|
|
#include <device/pci_ops.h>
|
|
#include <device/pci_ids.h>
|
|
#include <option.h>
|
|
#include <edid.h>
|
|
#include <drivers/intel/gma/edid.h>
|
|
#include <drivers/intel/gma/i915.h>
|
|
#include <drivers/intel/gma/opregion.h>
|
|
#include <string.h>
|
|
#include <pc80/vga.h>
|
|
#include <pc80/vga_io.h>
|
|
#include <commonlib/helpers.h>
|
|
#include <types.h>
|
|
#include <framebuffer_info.h>
|
|
|
|
#include "i945.h"
|
|
#include "chip.h"
|
|
|
|
#define GDRST 0xc0
|
|
#define MSAC 0x62 /* Multi Size Aperture Control */
|
|
|
|
#define LVDS_CLOCK_A_POWERUP_ALL (3 << 8)
|
|
#define LVDS_CLOCK_B_POWERUP_ALL (3 << 4)
|
|
#define LVDS_CLOCK_BOTH_POWERUP_ALL (3 << 2)
|
|
|
|
#define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */
|
|
|
|
#define DPLL_INTEGRATED_CRI_CLK_VLV (1 << 14)
|
|
|
|
#define PGETBL_CTL 0x2020
|
|
#define PGETBL_ENABLED 0x00000001
|
|
|
|
#define BASE_FREQUENCY 100000
|
|
|
|
#define DEFAULT_BLC_PWM 180
|
|
|
|
static int gtt_setup(u8 *mmiobase)
|
|
{
|
|
unsigned long PGETBL_save;
|
|
unsigned long tom; // top of memory
|
|
|
|
/*
|
|
* The Video BIOS places the GTT right below top of memory.
|
|
*/
|
|
tom = pci_read_config8(pcidev_on_root(0, 0), TOLUD) << 24;
|
|
PGETBL_save = tom - 256 * KiB;
|
|
PGETBL_save |= PGETBL_ENABLED;
|
|
PGETBL_save |= 2; /* set GTT to 256kb */
|
|
|
|
write32(mmiobase + GFX_FLSH_CNTL, 0);
|
|
|
|
write32(mmiobase + PGETBL_CTL, PGETBL_save);
|
|
|
|
/* verify */
|
|
if (read32(mmiobase + PGETBL_CTL) & PGETBL_ENABLED) {
|
|
printk(BIOS_DEBUG, "%s is enabled.\n", __func__);
|
|
} else {
|
|
printk(BIOS_DEBUG, "%s failed!!!\n", __func__);
|
|
return 1;
|
|
}
|
|
write32(mmiobase + GFX_FLSH_CNTL, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intel_gma_init_lvds(struct northbridge_intel_i945_config *conf,
|
|
unsigned int pphysbase, unsigned int piobase,
|
|
u8 *mmiobase, unsigned int pgfx)
|
|
{
|
|
struct edid edid;
|
|
struct edid_mode *mode;
|
|
u8 edid_data[128];
|
|
unsigned long temp;
|
|
int hpolarity, vpolarity;
|
|
u32 smallest_err = 0xffffffff;
|
|
u32 target_frequency;
|
|
u32 pixel_p1 = 1;
|
|
u32 pixel_p2;
|
|
u32 pixel_n = 1;
|
|
u32 pixel_m1 = 1;
|
|
u32 pixel_m2 = 1;
|
|
u32 hactive, vactive, right_border, bottom_border;
|
|
u32 vsync, hsync, vblank, hblank, hfront_porch, vfront_porch;
|
|
u32 i, j;
|
|
u32 uma_size;
|
|
u16 reg16;
|
|
|
|
printk(BIOS_SPEW,
|
|
"i915lightup: graphics %p mmio %p addrport %04x physbase %08x\n",
|
|
(void *)pgfx, mmiobase, piobase, pphysbase);
|
|
|
|
intel_gmbus_read_edid(mmiobase + GMBUS0, GMBUS_PORT_PANEL, 0x50,
|
|
edid_data, sizeof(edid_data));
|
|
decode_edid(edid_data, sizeof(edid_data), &edid);
|
|
mode = &edid.mode;
|
|
|
|
hpolarity = (mode->phsync == '-');
|
|
vpolarity = (mode->pvsync == '-');
|
|
hactive = edid.x_resolution;
|
|
vactive = edid.y_resolution;
|
|
right_border = mode->hborder;
|
|
bottom_border = mode->vborder;
|
|
vblank = mode->vbl;
|
|
hblank = mode->hbl;
|
|
vsync = mode->vspw;
|
|
hsync = mode->hspw;
|
|
hfront_porch = mode->hso;
|
|
vfront_porch = mode->vso;
|
|
|
|
for (i = 0; i < 2; i++)
|
|
for (j = 0; j < 0x100; j++)
|
|
/* R = j, G = j, B = j. */
|
|
write32(mmiobase + PALETTE(i) + 4 * j, 0x10101 * j);
|
|
|
|
write32(mmiobase + PCH_PP_CONTROL, PANEL_UNLOCK_REGS
|
|
| (read32(mmiobase + PCH_PP_CONTROL) & ~PANEL_UNLOCK_MASK));
|
|
|
|
write32(mmiobase + MI_ARB_STATE, MI_ARB_C3_LP_WRITE_ENABLE | (1 << 27));
|
|
/* Clean registers. */
|
|
for (i = 0; i < 0x20; i += 4)
|
|
write32(mmiobase + RENDER_RING_BASE + i, 0);
|
|
for (i = 0; i < 0x20; i += 4)
|
|
write32(mmiobase + FENCE_REG_965_0 + i, 0);
|
|
|
|
/* Disable VGA. */
|
|
write32(mmiobase + VGACNTRL, VGA_DISP_DISABLE);
|
|
|
|
/* Disable pipes. */
|
|
write32(mmiobase + PIPECONF(0), 0);
|
|
write32(mmiobase + PIPECONF(1), 0);
|
|
|
|
/* Init PRB0. */
|
|
write32(mmiobase + HWS_PGA, 0x352d2000);
|
|
write32(mmiobase + PRB0_CTL, 0);
|
|
write32(mmiobase + PRB0_HEAD, 0);
|
|
write32(mmiobase + PRB0_TAIL, 0);
|
|
write32(mmiobase + PRB0_START, 0);
|
|
write32(mmiobase + PRB0_CTL, 0x0001f001);
|
|
|
|
write32(mmiobase + D_STATE, DSTATE_PLL_D3_OFF
|
|
| DSTATE_GFX_CLOCK_GATING | DSTATE_DOT_CLOCK_GATING);
|
|
write32(mmiobase + ECOSKPD, 0x00010000);
|
|
write32(mmiobase + HWSTAM, 0xeffe);
|
|
write32(mmiobase + PORT_HOTPLUG_EN, conf->gpu_hotplug);
|
|
write32(mmiobase + INSTPM, 0x08000000 | INSTPM_AGPBUSY_DIS);
|
|
|
|
/* p2 divisor must 7 for dual channel LVDS */
|
|
/* and 14 for single channel LVDS */
|
|
pixel_p2 = mode->lvds_dual_channel ? 7 : 14;
|
|
target_frequency = mode->pixel_clock;
|
|
|
|
/* Find suitable divisors, m1, m2, p1, n. */
|
|
/* refclock * (5 * (m1 + 2) + (m1 + 2)) / (n + 2) / p1 / p2 */
|
|
/* should be closest to target frequency as possible */
|
|
u32 candn, candm1, candm2, candp1;
|
|
for (candm1 = 8; candm1 <= 18; candm1++) {
|
|
for (candm2 = 3; candm2 <= 7; candm2++) {
|
|
for (candn = 1; candn <= 6; candn++) {
|
|
for (candp1 = 1; candp1 <= 8; candp1++) {
|
|
u32 m = 5 * (candm1 + 2) + (candm2 + 2);
|
|
u32 p = candp1 * pixel_p2;
|
|
u32 vco = DIV_ROUND_CLOSEST(BASE_FREQUENCY * m, candn + 2);
|
|
u32 dot = DIV_ROUND_CLOSEST(vco, p);
|
|
u32 this_err = MAX(dot, target_frequency) -
|
|
MIN(dot, target_frequency);
|
|
if ((m < 70) || (m > 120))
|
|
continue;
|
|
if (this_err < smallest_err) {
|
|
smallest_err = this_err;
|
|
pixel_n = candn;
|
|
pixel_m1 = candm1;
|
|
pixel_m2 = candm2;
|
|
pixel_p1 = candp1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (smallest_err == 0xffffffff) {
|
|
printk(BIOS_ERR, "Couldn't find GFX clock divisors\n");
|
|
return -1;
|
|
}
|
|
|
|
printk(BIOS_INFO, "bringing up panel at resolution %d x %d\n",
|
|
hactive, vactive);
|
|
printk(BIOS_DEBUG, "Borders %d x %d\n", right_border, bottom_border);
|
|
printk(BIOS_DEBUG, "Blank %d x %d\n", hblank, vblank);
|
|
printk(BIOS_DEBUG, "Sync %d x %d\n", hsync, vsync);
|
|
printk(BIOS_DEBUG, "Front porch %d x %d\n", hfront_porch, vfront_porch);
|
|
printk(BIOS_DEBUG, (conf->gpu_lvds_use_spread_spectrum_clock
|
|
? "Spread spectrum clock\n"
|
|
: "DREF clock\n"));
|
|
printk(BIOS_DEBUG, (mode->lvds_dual_channel
|
|
? "Dual channel\n"
|
|
: "Single channel\n"));
|
|
printk(BIOS_DEBUG, "Polarities %d, %d\n",
|
|
hpolarity, vpolarity);
|
|
printk(BIOS_DEBUG, "Pixel N=%d, M1=%d, M2=%d, P1=%d\n",
|
|
pixel_n, pixel_m1, pixel_m2, pixel_p1);
|
|
printk(BIOS_DEBUG, "Pixel clock %d kHz\n",
|
|
BASE_FREQUENCY * (5 * (pixel_m1 + 2) + (pixel_m2 + 2)) /
|
|
(pixel_n + 2) / (pixel_p1 * pixel_p2));
|
|
|
|
printk(BIOS_INFO, "VGA mode: %s\n", CONFIG(LINEAR_FRAMEBUFFER) ?
|
|
"Linear framebuffer" : "text");
|
|
if (CONFIG(LINEAR_FRAMEBUFFER)) {
|
|
/* Disable panel fitter (we're in native resolution). */
|
|
write32(mmiobase + PF_CTL(0), 0);
|
|
write32(mmiobase + PF_WIN_SZ(0), 0);
|
|
write32(mmiobase + PF_WIN_POS(0), 0);
|
|
write32(mmiobase + PFIT_PGM_RATIOS, 0);
|
|
write32(mmiobase + PFIT_CONTROL, 0);
|
|
} else {
|
|
write32(mmiobase + PF_WIN_SZ(0), vactive | (hactive << 16));
|
|
write32(mmiobase + PF_WIN_POS(0), 0);
|
|
write32(mmiobase + PF_CTL(0), PF_ENABLE | PF_FILTER_MED_3x3);
|
|
write32(mmiobase + PFIT_CONTROL, PFIT_ENABLE
|
|
| (1 << PFIT_PIPE_SHIFT) | HORIZ_AUTO_SCALE
|
|
| VERT_AUTO_SCALE);
|
|
}
|
|
|
|
mdelay(1);
|
|
|
|
write32(mmiobase + DSPCNTR(0), DISPPLANE_BGRX888
|
|
| DISPPLANE_SEL_PIPE_B | DISPPLANE_GAMMA_ENABLE);
|
|
|
|
mdelay(1);
|
|
write32(mmiobase + PP_CONTROL, PANEL_UNLOCK_REGS
|
|
| (read32(mmiobase + PP_CONTROL) & ~PANEL_UNLOCK_MASK));
|
|
write32(mmiobase + FP0(1),
|
|
(pixel_n << 16)
|
|
| (pixel_m1 << 8) | pixel_m2);
|
|
write32(mmiobase + DPLL(1),
|
|
DPLL_VGA_MODE_DIS |
|
|
DPLL_VCO_ENABLE | DPLLB_MODE_LVDS
|
|
| (mode->lvds_dual_channel ? DPLLB_LVDS_P2_CLOCK_DIV_7
|
|
: DPLLB_LVDS_P2_CLOCK_DIV_14)
|
|
| (conf->gpu_lvds_use_spread_spectrum_clock
|
|
? DPLL_INTEGRATED_CLOCK_VLV | DPLL_INTEGRATED_CRI_CLK_VLV
|
|
: 0)
|
|
| (0x10000 << (pixel_p1 - 1)));
|
|
mdelay(1);
|
|
write32(mmiobase + DPLL(1),
|
|
DPLL_VGA_MODE_DIS |
|
|
DPLL_VCO_ENABLE | DPLLB_MODE_LVDS
|
|
| (mode->lvds_dual_channel ? DPLLB_LVDS_P2_CLOCK_DIV_7
|
|
: DPLLB_LVDS_P2_CLOCK_DIV_14)
|
|
| ((conf->gpu_lvds_use_spread_spectrum_clock ? 3 : 0) << 13)
|
|
| (0x10000 << (pixel_p1 - 1)));
|
|
mdelay(1);
|
|
write32(mmiobase + HTOTAL(1),
|
|
((hactive + right_border + hblank - 1) << 16)
|
|
| (hactive - 1));
|
|
write32(mmiobase + HBLANK(1),
|
|
((hactive + right_border + hblank - 1) << 16)
|
|
| (hactive + right_border - 1));
|
|
write32(mmiobase + HSYNC(1),
|
|
((hactive + right_border + hfront_porch + hsync - 1) << 16)
|
|
| (hactive + right_border + hfront_porch - 1));
|
|
|
|
write32(mmiobase + VTOTAL(1), ((vactive + bottom_border + vblank - 1) << 16)
|
|
| (vactive - 1));
|
|
write32(mmiobase + VBLANK(1), ((vactive + bottom_border + vblank - 1) << 16)
|
|
| (vactive + bottom_border - 1));
|
|
write32(mmiobase + VSYNC(1),
|
|
((vactive + bottom_border + vfront_porch + vsync - 1) << 16)
|
|
| (vactive + bottom_border + vfront_porch - 1));
|
|
|
|
if (CONFIG(LINEAR_FRAMEBUFFER)) {
|
|
write32(mmiobase + PIPESRC(1), ((hactive - 1) << 16)
|
|
| (vactive - 1));
|
|
} else {
|
|
write32(mmiobase + PIPESRC(1), (639 << 16) | 399);
|
|
}
|
|
|
|
mdelay(1);
|
|
|
|
write32(mmiobase + DSPSIZE(0), (hactive - 1) | ((vactive - 1) << 16));
|
|
write32(mmiobase + DSPPOS(0), 0);
|
|
|
|
edid.bytes_per_line = (edid.bytes_per_line + 63) & ~63;
|
|
write32(mmiobase + DSPADDR(0), 0);
|
|
write32(mmiobase + DSPSURF(0), 0);
|
|
write32(mmiobase + DSPSTRIDE(0), edid.bytes_per_line);
|
|
write32(mmiobase + DSPCNTR(0), DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888
|
|
| DISPPLANE_SEL_PIPE_B | DISPPLANE_GAMMA_ENABLE);
|
|
mdelay(1);
|
|
|
|
write32(mmiobase + PIPECONF(1), PIPECONF_ENABLE);
|
|
write32(mmiobase + LVDS, LVDS_ON
|
|
| (hpolarity << 20) | (vpolarity << 21)
|
|
| (mode->lvds_dual_channel ? LVDS_CLOCK_B_POWERUP_ALL
|
|
| LVDS_CLOCK_BOTH_POWERUP_ALL : 0)
|
|
| LVDS_CLOCK_A_POWERUP_ALL
|
|
| LVDS_PIPE(1));
|
|
|
|
write32(mmiobase + PP_CONTROL, PANEL_UNLOCK_REGS | PANEL_POWER_OFF);
|
|
write32(mmiobase + PP_CONTROL, PANEL_UNLOCK_REGS | PANEL_POWER_RESET);
|
|
mdelay(1);
|
|
write32(mmiobase + PP_CONTROL, PANEL_UNLOCK_REGS
|
|
| PANEL_POWER_ON | PANEL_POWER_RESET);
|
|
|
|
printk(BIOS_DEBUG, "waiting for panel powerup\n");
|
|
while (1) {
|
|
u32 reg32;
|
|
reg32 = read32(mmiobase + PP_STATUS);
|
|
if ((reg32 & PP_SEQUENCE_MASK) == PP_SEQUENCE_NONE)
|
|
break;
|
|
}
|
|
printk(BIOS_DEBUG, "panel powered up\n");
|
|
|
|
write32(mmiobase + PP_CONTROL, PANEL_POWER_ON | PANEL_POWER_RESET);
|
|
|
|
/* Clear interrupts. */
|
|
write32(mmiobase + DEIIR, 0xffffffff);
|
|
write32(mmiobase + SDEIIR, 0xffffffff);
|
|
write32(mmiobase + IIR, 0xffffffff);
|
|
write32(mmiobase + IMR, 0xffffffff);
|
|
write32(mmiobase + EIR, 0xffffffff);
|
|
|
|
if (gtt_setup(mmiobase)) {
|
|
printk(BIOS_ERR, "ERROR: GTT Setup Failed!!!\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Setup GTT. */
|
|
|
|
reg16 = pci_read_config16(pcidev_on_root(0, 0), GGC);
|
|
uma_size = 0;
|
|
if (!(reg16 & 2)) {
|
|
uma_size = decode_igd_memory_size((reg16 >> 4) & 7);
|
|
printk(BIOS_DEBUG, "%dM UMA\n", uma_size >> 10);
|
|
}
|
|
|
|
for (i = 0; i < (uma_size - 256) / 4; i++) {
|
|
outl((i << 2) | 1, piobase);
|
|
outl(pphysbase + (i << 12) + 1, piobase + 4);
|
|
}
|
|
|
|
temp = read32(mmiobase + PGETBL_CTL);
|
|
printk(BIOS_INFO, "GTT PGETBL_CTL register: 0x%lx\n", temp);
|
|
|
|
if (temp & 1)
|
|
printk(BIOS_INFO, "GTT Enabled\n");
|
|
else
|
|
printk(BIOS_ERR, "ERROR: GTT is still Disabled!!!\n");
|
|
|
|
if (CONFIG(LINEAR_FRAMEBUFFER)) {
|
|
printk(BIOS_SPEW, "memset %p to 0x00 for %d bytes\n",
|
|
(void *)pgfx, hactive * vactive * 4);
|
|
memset((void *)pgfx, 0x00, hactive * vactive * 4);
|
|
|
|
fb_new_framebuffer_info_from_edid(&edid, pgfx);
|
|
} else {
|
|
vga_misc_write(0x67);
|
|
|
|
write32(mmiobase + DSPCNTR(0), DISPPLANE_SEL_PIPE_B);
|
|
write32(mmiobase + VGACNTRL, 0x02c4008e | VGA_PIPE_B_SELECT);
|
|
|
|
vga_textmode_init();
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int intel_gma_init_vga(struct northbridge_intel_i945_config *conf,
|
|
unsigned int pphysbase, unsigned int piobase,
|
|
u8 *mmiobase, unsigned int pgfx)
|
|
{
|
|
int i;
|
|
u32 hactive, vactive;
|
|
u16 reg16;
|
|
u32 uma_size;
|
|
|
|
printk(BIOS_SPEW, "mmiobase %x addrport %x physbase %x\n",
|
|
(u32)mmiobase, piobase, pphysbase);
|
|
|
|
gtt_setup(mmiobase);
|
|
|
|
/* Disable VGA. */
|
|
write32(mmiobase + VGACNTRL, VGA_DISP_DISABLE);
|
|
|
|
/* Disable pipes. */
|
|
write32(mmiobase + PIPECONF(0), 0);
|
|
write32(mmiobase + PIPECONF(1), 0);
|
|
|
|
write32(mmiobase + INSTPM, 0x800);
|
|
|
|
vga_gr_write(0x18, 0);
|
|
|
|
write32(mmiobase + VGA0, 0x200074);
|
|
write32(mmiobase + VGA1, 0x200074);
|
|
|
|
write32(mmiobase + DSPFW3, 0x7f3f00c1 & ~PINEVIEW_SELF_REFRESH_EN);
|
|
write32(mmiobase + DSPCLK_GATE_D, 0);
|
|
write32(mmiobase + FW_BLC, 0x03060106);
|
|
write32(mmiobase + FW_BLC2, 0x00000306);
|
|
|
|
write32(mmiobase + ADPA, ADPA_DAC_ENABLE
|
|
| ADPA_PIPE_A_SELECT
|
|
| ADPA_USE_VGA_HVPOLARITY
|
|
| ADPA_VSYNC_CNTL_ENABLE
|
|
| ADPA_HSYNC_CNTL_ENABLE
|
|
| ADPA_DPMS_ON
|
|
);
|
|
|
|
write32(mmiobase + 0x7041c, 0x0);
|
|
|
|
write32(mmiobase + DPLL_MD(0), 0x3);
|
|
write32(mmiobase + DPLL_MD(1), 0x3);
|
|
write32(mmiobase + DSPCNTR(1), 0x1000000);
|
|
write32(mmiobase + PIPESRC(1), 0x027f01df);
|
|
|
|
vga_misc_write(0x67);
|
|
const u8 cr[] = { 0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
|
|
0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00,
|
|
0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3,
|
|
0xff
|
|
};
|
|
vga_cr_write(0x11, 0);
|
|
|
|
for (i = 0; i <= 0x18; i++)
|
|
vga_cr_write(i, cr[i]);
|
|
|
|
// Disable screen memory to prevent garbage from appearing.
|
|
vga_sr_write(1, vga_sr_read(1) | 0x20);
|
|
hactive = 640;
|
|
vactive = 400;
|
|
|
|
mdelay(1);
|
|
write32(mmiobase + DPLL(0),
|
|
DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL
|
|
| DPLL_VGA_MODE_DIS
|
|
| DPLL_DAC_SERIAL_P2_CLOCK_DIV_10
|
|
| 0x400601
|
|
);
|
|
mdelay(1);
|
|
write32(mmiobase + DPLL(0),
|
|
DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL
|
|
| DPLL_VGA_MODE_DIS
|
|
| DPLL_DAC_SERIAL_P2_CLOCK_DIV_10
|
|
| 0x400601
|
|
);
|
|
|
|
write32(mmiobase + ADPA, ADPA_DAC_ENABLE
|
|
| ADPA_PIPE_A_SELECT
|
|
| ADPA_USE_VGA_HVPOLARITY
|
|
| ADPA_VSYNC_CNTL_ENABLE
|
|
| ADPA_HSYNC_CNTL_ENABLE
|
|
| ADPA_DPMS_ON
|
|
);
|
|
|
|
write32(mmiobase + HTOTAL(0),
|
|
((hactive - 1) << 16)
|
|
| (hactive - 1));
|
|
write32(mmiobase + HBLANK(0),
|
|
((hactive - 1) << 16)
|
|
| (hactive - 1));
|
|
write32(mmiobase + HSYNC(0),
|
|
((hactive - 1) << 16)
|
|
| (hactive - 1));
|
|
|
|
write32(mmiobase + VTOTAL(0), ((vactive - 1) << 16)
|
|
| (vactive - 1));
|
|
write32(mmiobase + VBLANK(0), ((vactive - 1) << 16)
|
|
| (vactive - 1));
|
|
write32(mmiobase + VSYNC(0),
|
|
((vactive - 1) << 16)
|
|
| (vactive - 1));
|
|
|
|
write32(mmiobase + PF_WIN_POS(0), 0);
|
|
|
|
write32(mmiobase + PIPESRC(0), (639 << 16) | 399);
|
|
write32(mmiobase + PF_CTL(0), PF_ENABLE | PF_FILTER_MED_3x3);
|
|
write32(mmiobase + PF_WIN_SZ(0), vactive | (hactive << 16));
|
|
write32(mmiobase + PFIT_CONTROL, 0x0);
|
|
|
|
mdelay(1);
|
|
|
|
write32(mmiobase + FDI_RX_CTL(0), 0x00002040);
|
|
mdelay(1);
|
|
write32(mmiobase + FDI_RX_CTL(0), 0x80002050);
|
|
write32(mmiobase + FDI_TX_CTL(0), 0x00044000);
|
|
mdelay(1);
|
|
write32(mmiobase + FDI_TX_CTL(0), 0x80044000);
|
|
write32(mmiobase + PIPECONF(0), PIPECONF_ENABLE | PIPECONF_BPP_6 | PIPECONF_DITHER_EN);
|
|
|
|
write32(mmiobase + VGACNTRL, 0x0);
|
|
write32(mmiobase + DSPCNTR(0), DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888);
|
|
mdelay(1);
|
|
|
|
write32(mmiobase + ADPA, ADPA_DAC_ENABLE
|
|
| ADPA_PIPE_A_SELECT
|
|
| ADPA_USE_VGA_HVPOLARITY
|
|
| ADPA_VSYNC_CNTL_ENABLE
|
|
| ADPA_HSYNC_CNTL_ENABLE
|
|
| ADPA_DPMS_ON
|
|
);
|
|
|
|
write32(mmiobase + DSPFW3, 0x7f3f00c1);
|
|
write32(mmiobase + MI_MODE, 0x200 | VS_TIMER_DISPATCH);
|
|
write32(mmiobase + CACHE_MODE_0, (0x6820 | (1 << 9)) & ~(1 << 5));
|
|
write32(mmiobase + CACHE_MODE_1, 0x380 & ~(1 << 9));
|
|
|
|
/* Set up GTT. */
|
|
|
|
reg16 = pci_read_config16(pcidev_on_root(0, 0), GGC);
|
|
uma_size = 0;
|
|
if (!(reg16 & 2)) {
|
|
uma_size = decode_igd_memory_size((reg16 >> 4) & 7);
|
|
printk(BIOS_DEBUG, "%dM UMA\n", uma_size >> 10);
|
|
}
|
|
|
|
for (i = 0; i < (uma_size - 256) / 4; i++) {
|
|
outl((i << 2) | 1, piobase);
|
|
outl(pphysbase + (i << 12) + 1, piobase + 4);
|
|
}
|
|
|
|
/* Clear interrupts. */
|
|
write32(mmiobase + DEIIR, 0xffffffff);
|
|
write32(mmiobase + SDEIIR, 0xffffffff);
|
|
write32(mmiobase + IIR, 0xffffffff);
|
|
write32(mmiobase + IMR, 0xffffffff);
|
|
write32(mmiobase + EIR, 0xffffffff);
|
|
|
|
vga_textmode_init();
|
|
|
|
/* Enable screen memory. */
|
|
vga_sr_write(1, vga_sr_read(1) & ~0x20);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/* compare the header of the vga edid header */
|
|
/* if vga is not connected it should have a correct header */
|
|
static int probe_edid(u8 *mmiobase, u8 slave)
|
|
{
|
|
int i;
|
|
u8 vga_edid[128];
|
|
u8 header[8] = {0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00};
|
|
intel_gmbus_read_edid(mmiobase + GMBUS0, slave, 0x50, vga_edid, 128);
|
|
intel_gmbus_stop(mmiobase + GMBUS0);
|
|
for (i = 0; i < 8; i++) {
|
|
if (vga_edid[i] != header[i]) {
|
|
printk(BIOS_DEBUG, "No display connected on slave %d\n",
|
|
slave);
|
|
return 0;
|
|
}
|
|
}
|
|
printk(BIOS_SPEW, "Found a display on slave %d\n", slave);
|
|
return 1;
|
|
}
|
|
|
|
static u32 get_cdclk(struct device *const dev)
|
|
{
|
|
u16 gcfgc = pci_read_config16(dev, GCFGC);
|
|
|
|
if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
|
|
return 133333333;
|
|
|
|
switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
|
|
case GC_DISPLAY_CLOCK_333_320_MHZ:
|
|
return 320000000;
|
|
default:
|
|
case GC_DISPLAY_CLOCK_190_200_MHZ:
|
|
return 200000000;
|
|
}
|
|
}
|
|
|
|
static u32 freq_to_blc_pwm_ctl(struct device *const dev, u16 pwm_freq)
|
|
{
|
|
u32 blc_mod;
|
|
|
|
/* Set duty cycle to 100% due to use of legacy backlight control */
|
|
blc_mod = get_cdclk(dev) / (32 * pwm_freq);
|
|
return BLM_LEGACY_MODE | ((blc_mod / 2) << 17) | ((blc_mod / 2) << 1);
|
|
}
|
|
|
|
static void panel_setup(u8 *mmiobase, struct device *const dev)
|
|
{
|
|
const struct northbridge_intel_i945_config *const conf = dev->chip_info;
|
|
|
|
u32 reg32;
|
|
|
|
/* Set up Panel Power On Delays */
|
|
reg32 = (conf->gpu_panel_power_up_delay & 0x1fff) << 16;
|
|
reg32 |= (conf->gpu_panel_power_backlight_on_delay & 0x1fff);
|
|
write32(mmiobase + PP_ON_DELAYS, reg32);
|
|
|
|
/* Set up Panel Power Off Delays */
|
|
reg32 = (conf->gpu_panel_power_down_delay & 0x1fff) << 16;
|
|
reg32 |= (conf->gpu_panel_power_backlight_off_delay & 0x1fff);
|
|
write32(mmiobase + PP_OFF_DELAYS, reg32);
|
|
|
|
/* Set up Panel Power Cycle Delay */
|
|
reg32 = (get_cdclk(dev) / 20000 - 1) << PP_REFERENCE_DIVIDER_SHIFT;
|
|
reg32 |= conf->gpu_panel_power_cycle_delay & 0x1f;
|
|
write32(mmiobase + PP_DIVISOR, reg32);
|
|
|
|
/* Backlight init. */
|
|
if (conf->pwm_freq)
|
|
write32(mmiobase + BLC_PWM_CTL, freq_to_blc_pwm_ctl(dev,
|
|
conf->pwm_freq));
|
|
else
|
|
write32(mmiobase + BLC_PWM_CTL, freq_to_blc_pwm_ctl(dev,
|
|
DEFAULT_BLC_PWM));
|
|
}
|
|
|
|
static void gma_ngi(struct device *const dev)
|
|
{
|
|
/* This should probably run before post VBIOS init. */
|
|
printk(BIOS_INFO, "Initializing VGA without OPROM.\n");
|
|
void *mmiobase;
|
|
u32 iobase, graphics_base;
|
|
struct northbridge_intel_i945_config *conf = dev->chip_info;
|
|
|
|
iobase = dev->resource_list[1].base;
|
|
mmiobase = (void *)(uintptr_t)dev->resource_list[0].base;
|
|
graphics_base = dev->resource_list[2].base;
|
|
|
|
printk(BIOS_SPEW, "GMADR = 0x%08x GTTADR = 0x%08x\n",
|
|
pci_read_config32(dev, GMADR), pci_read_config32(dev, GTTADR));
|
|
|
|
int err;
|
|
|
|
if (CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GM))
|
|
panel_setup(mmiobase, dev);
|
|
|
|
/* probe if VGA is connected and always run */
|
|
/* VGA init if no LVDS is connected */
|
|
if (!probe_edid(mmiobase, GMBUS_PORT_PANEL) ||
|
|
probe_edid(mmiobase, GMBUS_PORT_VGADDC))
|
|
err = intel_gma_init_vga(conf,
|
|
pci_read_config32(dev, 0x5c) & ~0xf,
|
|
iobase, mmiobase, graphics_base);
|
|
else
|
|
err = intel_gma_init_lvds(conf,
|
|
pci_read_config32(dev, 0x5c) & ~0xf,
|
|
iobase, mmiobase, graphics_base);
|
|
if (err == 0)
|
|
gfx_set_init_done(1);
|
|
/* Linux relies on VBT for panel info. */
|
|
if (CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GM)) {
|
|
generate_fake_intel_oprom(&conf->gfx, dev, "$VBT CALISTOGA");
|
|
}
|
|
if (CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GC)) {
|
|
generate_fake_intel_oprom(&conf->gfx, dev, "$VBT LAKEPORT-G");
|
|
}
|
|
}
|
|
|
|
static void gma_func0_init(struct device *dev)
|
|
{
|
|
intel_gma_init_igd_opregion();
|
|
|
|
/* Unconditionally reset graphics */
|
|
pci_write_config8(dev, GDRST, 1);
|
|
udelay(50);
|
|
pci_write_config8(dev, GDRST, 0);
|
|
/* wait for device to finish */
|
|
while (pci_read_config8(dev, GDRST) & 1)
|
|
;
|
|
|
|
if (!CONFIG(NO_GFX_INIT))
|
|
pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER);
|
|
|
|
if (CONFIG(MAINBOARD_DO_NATIVE_VGA_INIT)) {
|
|
int vga_disable = (pci_read_config16(dev, GGC) & 2) >> 1;
|
|
if (acpi_is_wakeup_s3()) {
|
|
printk(BIOS_INFO,
|
|
"Skipping native VGA initialization when resuming from ACPI S3.\n");
|
|
} else {
|
|
if (vga_disable) {
|
|
printk(BIOS_INFO,
|
|
"IGD is not decoding legacy VGA MEM and IO: skipping NATIVE graphic init\n");
|
|
} else {
|
|
gma_ngi(dev);
|
|
}
|
|
}
|
|
} else {
|
|
/* PCI Init, will run VBIOS */
|
|
pci_dev_init(dev);
|
|
}
|
|
}
|
|
|
|
/* This doesn't reclaim stolen UMA memory, but IGD could still
|
|
be re-enabled later. */
|
|
static void gma_func0_disable(struct device *dev)
|
|
{
|
|
struct device *dev_host = pcidev_on_root(0x0, 0);
|
|
|
|
pci_write_config16(dev, GCFC, 0xa00);
|
|
pci_write_config16(dev_host, GGC, (1 << 1));
|
|
|
|
pci_and_config32(dev_host, DEVEN, ~(DEVEN_D2F0 | DEVEN_D2F1));
|
|
|
|
dev->enabled = 0;
|
|
}
|
|
|
|
static void gma_func1_init(struct device *dev)
|
|
{
|
|
u8 val;
|
|
|
|
if (!CONFIG(NO_GFX_INIT))
|
|
pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER);
|
|
|
|
if (get_option(&val, "tft_brightness") == CB_SUCCESS)
|
|
pci_write_config8(dev, 0xf4, val);
|
|
else
|
|
pci_write_config8(dev, 0xf4, 0xff);
|
|
}
|
|
|
|
static void gma_generate_ssdt(const struct device *device)
|
|
{
|
|
const struct northbridge_intel_i945_config *chip = device->chip_info;
|
|
|
|
drivers_intel_gma_displays_ssdt_generate(&chip->gfx);
|
|
}
|
|
|
|
static void gma_func0_read_resources(struct device *dev)
|
|
{
|
|
/* Set Untrusted Aperture Size to 256MB */
|
|
pci_update_config8(dev, MSAC, ~0x3, 0x2);
|
|
|
|
pci_dev_read_resources(dev);
|
|
}
|
|
|
|
static const char *gma_acpi_name(const struct device *dev)
|
|
{
|
|
return "GFX0";
|
|
}
|
|
|
|
static struct device_operations gma_func0_ops = {
|
|
.read_resources = gma_func0_read_resources,
|
|
.set_resources = pci_dev_set_resources,
|
|
.enable_resources = pci_dev_enable_resources,
|
|
.init = gma_func0_init,
|
|
.acpi_fill_ssdt = gma_generate_ssdt,
|
|
.vga_disable = gma_func0_disable,
|
|
.ops_pci = &pci_dev_ops_pci,
|
|
.acpi_name = gma_acpi_name,
|
|
};
|
|
|
|
static struct device_operations gma_func1_ops = {
|
|
.read_resources = pci_dev_read_resources,
|
|
.set_resources = pci_dev_set_resources,
|
|
.enable_resources = pci_dev_enable_resources,
|
|
.init = gma_func1_init,
|
|
.ops_pci = &pci_dev_ops_pci,
|
|
};
|
|
|
|
static const unsigned short i945_gma_func0_ids[] = {
|
|
0x2772, /* 82945G/GZ Integrated Graphics Controller */
|
|
0x27a2, /* Mobile 945GM/GMS Express Integrated Graphics Controller*/
|
|
0x27ae, /* Mobile 945GSE Express Integrated Graphics Controller */
|
|
0
|
|
};
|
|
|
|
static const unsigned short i945_gma_func1_ids[] = {
|
|
0x2776, /* Desktop 82945G/GZ/GC */
|
|
0x27a6, /* Mobile 945GM/GMS/GME Express Integrated Graphics Controller */
|
|
0
|
|
};
|
|
|
|
static const struct pci_driver i945_gma_func0_driver __pci_driver = {
|
|
.ops = &gma_func0_ops,
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.devices = i945_gma_func0_ids,
|
|
};
|
|
|
|
static const struct pci_driver i945_gma_func1_driver __pci_driver = {
|
|
.ops = &gma_func1_ops,
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.devices = i945_gma_func1_ids,
|
|
};
|