142 lines
4.8 KiB
Markdown
142 lines
4.8 KiB
Markdown
libgfxinit - Native Graphics Initialization
|
|
===========================================
|
|
|
|
Introduction and Current State in coreboot
|
|
------------------------------------------
|
|
|
|
*libgfxinit* is a library of full-featured graphics initialization
|
|
(aka. modesetting) drivers. It's implemented in SPARK (a subset of
|
|
Ada with formal verification features). While not restricted to in
|
|
any way, it currently only supports Intel's integrated graphics
|
|
controllers (GMA).
|
|
|
|
Currently, it supports the Intel Core i3/i5/i7 processor line, HDMI
|
|
and DP on the Apollo Lake processors and everything but SDVO on G45
|
|
and GM45 chipsets. At the time of writing, G45, GM45, everything
|
|
from Arrandale to Coffee Lake, and Apollo Lake are verified to work
|
|
within *coreboot*.
|
|
|
|
GMA: Framebuffer Configuration
|
|
------------------------------
|
|
|
|
*coreboot* supports two different framebuffer setups. The default
|
|
enables the legacy VGA plane in textmode. Due to legacy hardware
|
|
constraints, only the first found display is enabled in this mode.
|
|
(cf. `src/drivers/intel/gma/text_fb/gma.adb`).
|
|
|
|
The second option sets up a high-resolution framebuffer with the
|
|
native resolution of the display if only one is detected, or the
|
|
smallest of all resolutions (per dimension) if multiple displays
|
|
are detected. This option is selected by
|
|
`CONFIG_FRAMEBUFFER_KEEP_VESA_MODE`.
|
|
(cf. `src/drivers/intel/gma/hires_fb/gma.adb`).
|
|
|
|
In any case, a smaller framebuffer is up-scaled to each display's
|
|
native resolution while keeping aspect ratio.
|
|
|
|
GMA: Hook-up in Chipset Initialization
|
|
--------------------------------------
|
|
|
|
Both configurations described above implement a procedure
|
|
`GMA.gfxinit()`:
|
|
|
|
procedure gfxinit (lightup_ok : out int);
|
|
|
|
This procedure is exported as the C function `gma_gfxinit()` as
|
|
follows:
|
|
|
|
void gma_gfxinit(int *lightup_ok);
|
|
|
|
* `lightup_ok`: returns whether the initialization succeeded `1` or
|
|
failed `0`. Currently, only the case that no display
|
|
could be found counts as failure. A failure at a
|
|
later stage (e.g. failure to train a DP) is not
|
|
propagated.
|
|
|
|
GMA: Per Board Configuration
|
|
----------------------------
|
|
|
|
In order to set up the display panel, see the
|
|
[display panel-specific documentation](/gfx/display-panel.md).
|
|
|
|
There are a few Kconfig symbols to consider. To indicate that a
|
|
board can initialize graphics through *libgfxinit*:
|
|
|
|
select MAINBOARD_HAS_LIBGFXINIT
|
|
|
|
Internal ports share some hardware blocks (e.g. backlight, panel
|
|
power sequencer). Therefore, each system with an integrated panel
|
|
should set `GFX_GMA_PANEL_1_PORT` to the respective port, e.g.:
|
|
|
|
config GFX_GMA_PANEL_1_PORT
|
|
default "DP3"
|
|
|
|
For the most common cases, LVDS and eDP, exists a shorthand, one
|
|
can select either:
|
|
|
|
select GFX_GMA_PANEL_1_ON_EDP # the default, or
|
|
select GFX_GMA_PANEL_1_ON_LVDS
|
|
|
|
Some newer chips feature a second block of panel control logic.
|
|
For this, `GFX_GMA_PANEL_2_PORT` can be set.
|
|
|
|
Boards with a DVI-I connector share the DDC (I2C) pins for both
|
|
analog and digital displays. In this case, *libgfxinit* needs to
|
|
know through which interface the EDID can be queried:
|
|
|
|
select GFX_GMA_ANALOG_I2C_HDMI_B # or
|
|
select GFX_GMA_ANALOG_I2C_HDMI_C # or
|
|
select GFX_GMA_ANALOG_I2C_HDMI_D
|
|
|
|
Beside Kconfig options, *libgfxinit* needs to know which ports are
|
|
implemented on a board and should be probed for displays. The mapping
|
|
between the physical ports and these entries depends on the hardware
|
|
implementation and can be recovered by testing or studying the output
|
|
of `intelvbttool` or `intel_vbt_decode`.
|
|
Each board has to implement the package `GMA.Mainboard` with a list:
|
|
|
|
ports : HW.GFX.GMA.Display_Probing.Port_List;
|
|
|
|
or a function returning such a list:
|
|
|
|
function ports return HW.GFX.GMA.Display_Probing.Port_List;
|
|
|
|
You can select from the following Ports:
|
|
|
|
type Port_Type is
|
|
(Disabled, -- optionally terminates the list
|
|
LVDS,
|
|
eDP,
|
|
DP1,
|
|
DP2,
|
|
DP3,
|
|
HDMI1, -- also DVI-D, or HDMI over DP++
|
|
HDMI2,
|
|
HDMI3,
|
|
Analog); -- legacy VGA port, or analog part of DVI-I
|
|
|
|
Each `DPx` and `HDMIx` pair share pins. If they are exposed as DP
|
|
ports, they are usually DP++ (aka. dual-mode DP) ports that can
|
|
also output HDMI signals through passive adapters. In this case,
|
|
both DPx and HDMIx should be listed.
|
|
|
|
A good example is the mainboard Kontron/KTQM77, it features two
|
|
DP++ ports (DP2/HDMI2, DP3/HDMI3), one DVI-I port (HDMI1/Analog),
|
|
eDP and LVDS. It defines `ports` as follows:
|
|
|
|
ports : constant Port_List :=
|
|
(DP2,
|
|
DP3,
|
|
HDMI1,
|
|
HDMI2,
|
|
HDMI3,
|
|
Analog,
|
|
LVDS,
|
|
eDP,
|
|
others => Disabled);
|
|
|
|
The `GMA.gfxinit()` procedure probes for display EDIDs in the
|
|
given order until all available pipes are taken. That's 1 pipe
|
|
in VGA textmode, 2 pipes in high-resolution mode until Sandy
|
|
Bridge, 3 pipes from Ivy Bridge on.
|