Go to file
Tim Wawrzynczak bb50c67227 soc/intel/tigerlake: Move tco_configure to bootblock
On ChromeOS systems with a serial-enabled BIOS and vboot writing a new
firmware image to the Chrome EC, it was possible for the TCO watchdog
timer to trip 2 times before tco_configure() was called in romstage.
This caused an extra reboot of the system (at a rather inopportune time)
and because the EC didn't perform a full reset, the system boots into
recovery mode.

This patch moves the call to tco_configure() for Tiger Lake from
romstage to bootblock, in order to make sure the TCO watchdog timer is
halted before vboot_sync_ec() runs in romstage. It should be harmless to
configure the TCO device earlier in the boot flow.

BUG=b:160272400
TEST=boot Volteer (to a non-recovery kernel!) with a freshly imaged EC

Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Iefdc2c861ab8b5fde7f736c04149be7de7b3ae0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43313
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12 19:33:30 +00:00
3rdparty Update vboot submodule to upstream master 2020-07-03 21:03:19 +00:00
Documentation cpu/x86/smm: Add support for long mode 2020-07-08 07:28:32 +00:00
LICENSES drivers: Use SPDX identifiers 2020-05-25 22:19:21 +00:00
configs drivers/pc80/tpm: Remove LPC_TPM 2020-07-04 11:17:44 +00:00
payloads payloads/tianocore: Don't recurse submodules 2020-07-12 19:29:04 +00:00
src soc/intel/tigerlake: Move tco_configure to bootblock 2020-07-12 19:33:30 +00:00
tests tests: Add lib/hexstrtobin-test test case 2020-07-07 17:26:42 +00:00
util util/inteltool: add PCI ID for ICH10DO 2020-07-09 21:54:33 +00:00
.checkpatch.conf
.clang-format
.editorconfig Add .editorconfig file 2019-09-10 12:52:18 +00:00
.gitignore cbfstool: Build vboot library 2020-03-23 08:34:23 +00:00
.gitmodules Add qc_blobs repository 2020-06-30 08:57:03 +00:00
.gitreview
AUTHORS AUTHORS, util/: Drop individual copyright notices 2020-05-09 21:21:32 +00:00
COPYING
MAINTAINERS MAINTAINERS: Add Maintainers for Prodrive Hermes Mainboard 2020-07-04 11:16:19 +00:00
Makefile build system: Rely on xcompile for HOSTCC and HOSTCXX 2020-07-08 08:53:46 +00:00
Makefile.inc Add qc_blobs repository 2020-06-30 08:57:03 +00:00
README.md README.md: Remove link to deprecated wiki 2019-11-16 20:39:55 +00:00
gnat.adc treewide: Remove "this file is part of" lines 2020-05-11 17:11:40 +00:00
toolchain.inc Remove MAYBE_STATIC_BSS and ENV_STAGE_HAS_BSS_SECTION 2020-05-26 15:04:08 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.