ffbc3b5f5f
* Add chips ops for IPMI KCS.
* Get IPMI version over KCS.
* Generates ACPI SPMI table for IPMI KCS.
* Generates SMBIOS type 38 for IPMI KCS.
* Generates ACPI SPMI device for IPMI KCS on LPC device.
* Add documentation
To use this driver on BMC that support KCS on I/O:
1. Add an entry to the devicetree.cb:
chip drivers/ipmi
device pnp ca2.0 on end # IPMI KCS
end
2. Select IPMI_KCS in Kconfig.
3. (Optional) enable LPC I/O decode for the given address.
Tested on Wedge100s.
Change-Id: I73cbd2058ccdc5395baf244f31345a85eb0047d7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
47 lines
1.4 KiB
Markdown
47 lines
1.4 KiB
Markdown
# IPMI KCS driver
|
|
|
|
The driver can be found in `src/drivers/ipmi/`. It works with BMC that provide
|
|
a KCS I/O interface as specified in the [IPMI] standard.
|
|
|
|
The driver detects the IPMI version, reserves the I/O space in coreboot's
|
|
resource allocator and writes the required ACPI and SMBIOS tables.
|
|
|
|
## For developers
|
|
|
|
To use the driver, select the `IPMI_KCS` Kconfig and add the following PNP
|
|
device under the LPC bridge device (in example for the KCS at 0xca2):
|
|
|
|
```
|
|
chip drivers/ipmi
|
|
device pnp ca2.0 on end # IPMI KCS
|
|
end
|
|
```
|
|
|
|
**Note:** The I/O base address needs to be aligned to 2.
|
|
|
|
The following registers can be set:
|
|
|
|
* `have_nv_storage`
|
|
* Boolean
|
|
* If true `nv_storage_device_address` will be added to SMBIOS type 38.
|
|
* `nv_storage_device_address`
|
|
* Integer
|
|
* The NV storage address as defined in SMBIOS spec for type 38.
|
|
* `bmc_i2c_address`
|
|
* Integer
|
|
* The i2c address of the BMC. zero if not applicable.
|
|
* `have_apic`
|
|
* Boolean
|
|
* If true the `apic_interrupt` will be added to SPMI table.
|
|
* `apic_interrupt`
|
|
* Integer
|
|
* The APIC interrupt used to notify about a change on the KCS.
|
|
* `have_gpe`
|
|
* Boolean
|
|
* If true the `gpe_interrupt` will be added to SPMI table.
|
|
* `gpe_interrupt`
|
|
* Integer
|
|
* The bit in GPE (SCI) used to notify about a change on the KCS.
|
|
|
|
|
|
[IPMI]: https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf
|