coreboot-kgpe-d16/src/mainboard/google/peppy
Shawn Nematbakhsh d6ff9e7deb peppy: RAM_ID + storage changes for next build.
- Update RAM_ID table.
- Add DEVSLP0 signal to NGFF SATA port.

Note: After this change, old Micron 2GB boards will no longer boot.

Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>

Change-Id: Id68a1d6ace2702cca9c37305726cd55a0bde5005
Reviewed-on: https://gerrit.chromium.org/gerrit/60167
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Dave Parker <dparker@chromium.org>
Commit-Queue: Dave Parker <dparker@chromium.org>
Reviewed-on: http://review.coreboot.org/4340
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12 22:02:42 +01:00
..
acpi peppy: Enable power limiting for thermal control 2013-12-07 03:28:48 +01:00
acpi_tables.c peppy: Enable power limiting for thermal control 2013-12-07 03:28:48 +01:00
chromeos.c peppy: Disable forced dev mode. 2013-12-05 20:12:10 +01:00
cmos.layout peppy: Initial mainboard commit 2013-11-25 23:48:52 +01:00
devicetree.cb peppy: Port updates from slippy/falco boards 2013-12-02 18:41:06 +01:00
dsdt.asl peppy: Initial mainboard commit 2013-11-25 23:48:52 +01:00
ec.c peppy: Initial mainboard commit 2013-11-25 23:48:52 +01:00
ec.h peppy: Initial mainboard commit 2013-11-25 23:48:52 +01:00
Elpida_EDJ4216EFBG.spd.hex peppy: Add Elipda DIMM SPD 2013-11-25 23:49:00 +01:00
fadt.c peppy: Initial mainboard commit 2013-11-25 23:48:52 +01:00
gpio.h peppy: RAM_ID + storage changes for next build. 2013-12-12 22:02:42 +01:00
hda_verb.h peppy: Port updates from slippy/falco boards 2013-12-02 18:41:06 +01:00
Hynix_HMT425S6AFR6A.spd.hex peppy: Initial mainboard commit 2013-11-25 23:48:52 +01:00
Kconfig haswell boards: Enable VIRTUAL_DEV_SWITCH 2013-12-03 01:24:59 +01:00
mainboard.c peppy: Port updates from slippy/falco boards 2013-12-02 18:41:06 +01:00
Makefile.inc Fix Makefile to include all copies of the SPD sources 2013-12-05 19:28:41 +01:00
Micron_4KTF25664HZ.spd.hex peppy: Initial mainboard commit 2013-11-25 23:48:52 +01:00
onboard.h peppy: Port updates from slippy/falco boards 2013-12-02 18:41:06 +01:00
romstage.c peppy: RAM_ID + storage changes for next build. 2013-12-12 22:02:42 +01:00
smihandler.c peppy: Disable audio codec enable GPIO in S3 + S5. 2013-12-12 22:02:35 +01:00
thermal.h peppy: Enable power limiting for thermal control 2013-12-07 03:28:48 +01:00